View 051144-01762-1_6988487.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

3m industrial products for metalworking please recycle. printed in u.s.a. ? 3m 2011. all rights reserved. 61-5002-8097-1 2011 edition abrasive systems division 3m center, building 223-6s-03 st. paul, mn 55144-1000 1-866-279-1235 www.3m.com/abrasives prices subject to change without notice. important notice to purchaser safety information: always read and follow all safety information included with the product. do not exceed maximum operating rpms. use guards provided with machine. follow safety operation procedures posted in work areas. product use: all statements, technical information and recommendations contained in this document are based upon tests or experience that 3m believes are reliable. however, many factors beyond 3ms control can effect the use and performance of a 3m product in a particular application, including the conditions under which the product is used and the time and environments conditions in which the product is expected to perform. since these factors are uniquely within the users knowledge and control, it is essential that the user evaluate the 3m product to determine whether it is fit for a particular purpose and suitable for the users method of application. warranty and limited remedy: unless stated otherwise in 3ms product literature, packaging inserts or product packaging for individual products, 3m warrants that each 3m product meets the applicable specifications at the time 3m ships the product. individual products may have additional or different warranties as stated on product literature, package inserts or product packages. 3 m m a k e s n o ot h er w a rran t i es , e x p ress o r i mp l i ed , i nc l u din g, bu t n ot l imi t ed to, an y imp l ied w arran ty o f merchan t abi l i ty o r fi t ness f o r a par t icu l ar purp o se o r an y imp l ied w arran ty arisin g o u t o f a c o urse o f dea l in g, cus to m o r usa g e o f t rade . user is responsible for determining whether the 3m product is fit for a particular purpose and suitable for users application. if the 3m product is defective within the warranty period, your exclusive remedy and 3ms and sellers sole obligation will be at 3ms option, to replace the product or refund the purchase price. limitation of liability: except where prohibited by law, 3m and seller will not be liable for any loss or damage arising from the 3m product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or strict liability. th r ee e as y wa y s to co n t a ct us fo r all 3m indus t rial pr o du ct s : 3m can provide additional products and accessories to meet your needs. please contact us in any of the following ways that you prefer: contact your local 3m authorized distributor directly. for information on a 3m distributor or sales representative in your area, contact us at the numbers below: for the contiguous 48 united states: call .............. 1-866-279-1288 f ax .............. 1-877-369-2923 e-mail us a t 3mindustrial@mmm.com f or additional 3m product information call 1-800-3m h elps or visit us at www.3m.com 1 2 3 engineered metalworking solutions 3m, b x , cool flow, classic, cubitron, e-a-r, e-a-rsoft, earflex, elavation, ep x , g reen corps, hookit, l exa, l ight vision, neons, o ne t ouch, o ptime, peltor, pistonz, push-ins, re l oad, roloc, safeabsorb, safe l ight, safety- w alk, scotch, scotch-brite, scotch-seal, scotch- w eld, scotchblok, scotchpar, scotchpro, speedglas, stikit, super 77, t artan, t hor, t rizact, ultrafit, vhb, virtua, w etordry and y ellow neon are all trademarks of 3m.
size micron upc product id bags per case polypropylene f elt #1 1 016145- 18093-4 nb0001pps1c 50 5 016145- 18099-6 nb0005pps1c 10 016145- 18105-4 nb0010pps1c 25 016145- 18111-5 nb0025pps1c 50 016145- 18117-7 nb0050pps1c 100 016145- 18123-8 nb0100pps1c 200 016145- 18129-0 nb0200pps1c #2 1 016145- 18094-1 nb0001pps2c 5 016145- 18100-9 nb0005pps2c 10 016145- 18106-1 nb0010pps2c 25 016145- 18112-2 nb0025pps2c 50 016145- 18118-4 nb0050pps2c 100 016145- 18124-5 nb0100pps2c 200 016145- 18130-6 nb0200pps2c polyester f elt #1 1 016145- 18089-7 nb0001ees1c 50 5 016145- 18095-8 nb0005ees1c 10 016145- 18101-6 nb0010ees1c 25 016145- 18107-8 nb0025ees1c 50 016145- 18113-9 nb0050ees1c 100 016145- 18119-1 nb0100ees1c 200 016145- 18125-2 nb0200ees1c #2 1 016145- 18090-3 nb0001ees2c 5 016145- 18096-5 nb0005ees2c 10 016145- 18102-3 nb0010ees2c 25 016145- 18108-5 nb0025ees2c 50 016145- 18114-6 nb0050ees2c 100 016145- 18120-7 nb0100ees2c 200 016145- 18126-9 nb0200ees2c size micron upc product id bags per case nylon monofilament #1 25 016145- 18195-5 nb0025nys1r 50 50 016145- 18197-9 nb0050nys1r 100 016145- 18199-3 nb0100nys1r 150 016145- 18201-3 nb0150nys1r 200 016145- 18203-7 nb0200nys1r 250 016145- 18205-1 nb0250nys1r 25 400 016145- 18207-5 nb0400nys1r 600 016145- 18209-9 nb0005pps2c 800 016145- 18211-2 nb0800nys1r 1200 016145- 18213-6 nb1200nys1r #2 25 016145- 18196-2 nb0025nys2r 50 50 016145- 18198-6 nb0050nys2r 100 016145- 18200-6 nb0100nys2r 150 016145- 18202-0 nb0150nys2r 200 016145- 18204-4 nb0200nys2r 250 016145- 18206-8 nb0250nys2r 400 016145- 18208-2 nb0400nys2r 25 600 016145- 18210-5 nb0600nys2r 800 016145- 18212-9 nb0800nys2r 1200 016145- 18214-3 nb1200nys2r 3m ? purification series nb liquid bag filters 3m ? purification series nb liquid bag filter products combine filtration experience and manufacturing expertise to provide high quality, cost effective solutions for those applications where a rated bag filtration is appropriate. series nb bag products are available in polypropylene felt and polyester felt in size #1 and size #2 configurations in grades ranging from 1C200 microns. t he ba gs feature an all welded construction with a plastic sealing collar for consistent and reproducible filtration. series nb bag products are also available in nylon monofilament materials of construction in size #1 and size #2 configurations in grades ranging from 25C1200 microns. t he high strength and uniform porosity of the nm o ba gs make them an excellent choice for applications looking for removal of oversized contaminants while allowing for passage of desired fluid particles (metallic paints). size #1 size #2 dimensions 7" od x 16" l 7" od x 32" l max. operating temperature 180f/82c (polypropylene felt) 300f/149c (polyester felt, nmo) max. recommended flow 90 gpm 180 gpm recommended changeout differential pressure 20 psid 3m ? purification series nb liquid bag f ilter specifications and o perating p arameters filtration products 125 t able of contents coated abrasives fibre discs 1C4 fla p discs 5C8 stikit ? and psa discs 9C13 roloc ? discs 14C19 belts 20C38 sheets and rolls 39C41 fla p wheels 42C 43 specialty 44C46 surface conditioning abrasives scotch-brite ? discs 47C53 roloc ? 48C50 hook-and-loop 51C52 tn quick change 53 spindle mount 53 scotch-brite ? belts 54C56 scotch-brite ? wheels 57C64 scotch-brite ? specialty abrasives 65C66 scotch-brite ? hand pads/rolls 67C68 bonded abrasives bonded type 27 wheels 69 bonded type 28 wheels 69 cut-off wheels 70 superabrasives wheels 78C85 dressing and t ruing tools 85C87 kits and packs abrasive kits/packs 71 abrasive grade guides abrasive grade comparison guide 88 scotch-brite ? product guide 88 adhesives and tapes structural and non-structural adhesives 89C95 scotch- weld ? adhesives 96C97 ta pes/masking/ dispensers 98C109 maintenance and repair maintenance aerosols 123 electrical 123 facility care 124 utility cloth rolls 124 filtration 3m ? purification series nb liquid bag filters 125 accessories abrasive accessories 72C77 safety respirators 110C113 speedglas ? helmets 114C115 hearing conserva tion 116C117 protective eyewear 118 sorbents 119 fall protection 120C121 122 ! safety warning s 12 p12 p16 16 p20
3m ? az belt 577f because new 3m ? az belts 577f last up to 20% longer than competitive belts, you can grind more parts for about the same price youre now paying for abrasives. its new and improved premium mineral resin system, tough durable backing, and waterproof grinding aid offers a big bang for your buck. an outstanding balance of high performance and affordability make 3m az belts 577f an ideal alternative for many day-to-day grinding operations. 3m ? flap disc 577f is a versatile product that delivers a fast cut, long life, and a smooth finish. performance and price make these discs a great value and the flap design allows one disc to perform both the grinding and blending steps. plus, the economic alumina zirconia mineral is ideal for lowering abrasive costs on both mild and stainless steel applications. for those really big jobs, try the 3m ? giant flap disc 577f with 25% more thickness for aggressive cut and durability. 3m ? speedglas ? 100 series welding helmets for women inspired by women welders and designed for women welders, these helmets feature uniquely feminine graphics while offering the protection and quality you expect from speedglas 100 series helmets. 3m ? cubitron ? ii metalworking belts 984f are made with revolutionary 3m precision-shaped ceramic grain technology, engineered with ultra-sharp, fast cutting points that wear evenly, run cool, and optimize mineral breakdown to maximize belt life. whether you are looking for faster productivity, longer life, or reduced heat on parts, cubitron ? ii metalworking belt sets the standard performance for abrasive belts. 3m ? flexible ao belts 302d and 332d are new low cost, flexible aluminum oxide belts. 302d has a flexible j weight backing for finishing highly contoured parts and 332d has a flexible x weight backing for added durability for finishing semi-contoured parts. now, along with 341d, 3m offers a full range of backing flexibilities at an unexpected price from the brand that stands for quality. 3m ? fall protection products count on 3m to help workers at height to get the job done safely. reliable fall arrest equipment harnesses, lanyards and anchoring devices provide safety and comfort. 3m ? cubitron ? ii fibre discs 982c are made with revolutionary 3m precision-shaped ceramic grain technology, engineered with ultra-sharp, fast-cutting points that wear evenly, run cool and optimize mineral breakdown to maximize disc life. 982c out performs comparable fibre discs on life, cut and cost per grind, guaranteed. finish more parts with fewer discs regardless of grinding pressure. 3m ? superabrasive wheels do you resharpen or manufacture carbide drills, endmills, taps, reamers or other round cutting tools? check out our selection of superabrasive wheels that are in-stock and ready to ship in 2 days! 1 2 3 4 5 6 7 8 for 2011 whats new 2 1 3 i 7 8 4 5 6
complete solutions. commitment to innovation and quality. complete solutions. its what youve come to expect from 3m, the leading supplier for metalworking industries. for over 100 years, 3m has been a proven leader, providing advanced technology and innovative solutions for increased productivity, enhanced effciency and improved manufacturing processes. this commitment to innovation continues with ongoing new product introductions focused on the complete metalworking experience. today, 3m metalworking products encompass a broad spectrum of solution-specifc products from personal safety to abrasives and high-strength adhesives. 3m presents a growing portfolio with each addition to this line of advanced solutions designed for all metalworking processes from start to fnish. ii
524289 1 3m ? fibre discs 3m ? fibre discs 381c ? general purpose disc for weld removal, grinding and blending ? resin bond aluminum oxide provides durability and aggressive stock removal upc grade max. rpm dia. x ctr. hole min./case 051144- 77595-8 24 13,300 4-1/2" x 7/8" 25 051144- 77596-5 36 051144- 77597-2 50 051144- 77598-9 60 051144- 77599-6 80 051144- 77600-9 100 051144- 77601-6 120 051144- 81369-8 24 12,000 5" x 7/8" 051144- 81372-8 36 051144- 81375-9 50 051144- 01727-0 60 051144- 20054-2 80 051144- 20053-5 100 051144- 20052-8 120 051144- 01745-4 16 8,600 7" x 7/8" 051144- 81370-4 24 051144- 81373-5 36 051144- 81376-6 50 051144- 01741-6 60 051144- 01740-9 80 051144- 01739-3 100 051144- 01738-6 120 051144- 81371-1 24 6,600 9-1/8" x 7/8" 25/100 051144- 81373-5 36 051144- 81377-3 50 25 051144- 01762-1 80 051144- 01761-4 ? 100 051144- 01760-7 ? 120 ? made-to-order 159094 choose the performance level that fits your needs with a complete offering of 3m ? fibre discs. get great performance at a great price with 3ms general purpose metalworking disc 381c. or, set a new standard for productivity with 3m ? cubitron ? ii 982c discs. all of 3ms fibre discs are available in a variety of sizes. see pages 72C77 for available accessories. coated abrasives 3m ? fibre disc selection guide selectfibrediscsforfastcuttingwhengrindingandblending. product id mineral metal type good 381c aluminumoxide carbonsteel 501c aluminazirconia stainless/ aluminum better 501c aluminazirconia carbonsteel 785c ceramicaluminum oxideblend stainless/ aluminum best 988c ceramic abrasivegrain carbonsteel 985c ceramic abrasivegrain stainless/ aluminum premium 982c precision shapedceramic carbonsteel 987c precision shapedceramic stainless/ aluminum life cutrate 381c 501c carbon steel 988c 982c life cutrate 501c 785c stainless steel 985c 987c
coated abrasives 3m ? fibre discs 785c ? 3m ? ceramic aluminum oxide blend abrasive grain ? an excellent starting point for stainless steel ? includes a grinding aid for cooler running upc grade max. rpm dia. x ctr. hole min./case 051111- 60719-0 36 13,300 4-1/2" x 5/8C11* 25 051144- 80660-7 36 13,300 4-1/2" x 7/8" 25/100 051144- 80661-4 50 051144- 80662-1 60 051144- 80663-8 80 051144- 80665-2 p120 051144- 13931-6 24 12,000 5" x 7/8" 051144- 13930-9 36 051144- 13928-6 50 051144- 13977-4 60 051144- 13926-2 80 051144- 80654-6 p100 051144- 80655-3 p120 051144- 88831-3 ? 60 8,600 7" x 5/8 C11* 051144- 13937-8 24 7" x 7/8" 051144- 13936-1 36 051144- 13934-7 50 051144- 13933-0 60 051144- 13932-3 80 051144- 80656-0 p100 051144- 80657-7 p120 051144- 13943-9 24 6,600 9-1/8" x 7/8" 051144- 13942-2 36 051144- 13940-8 50 051144- 13938-5 80 ? made-to-order * quick change tinneman nut attachment 60875 3m ? fibre discs (cont.) 3m ? fibre discs 501c ? versatile disc for use on a wide variety of metals ? aluminum zirconia provides a good option for both stainless and mild steel applications upc grade max. rpm dia. x ctr. hole min./case 051111- 50409-3 24 13,300 4-1/2" x 7/8" 25/100 051111- 50413-0 36 051111- 50414-7 50 051111- 50415-4 60 051111- 50416-1 80 051111- 50417-8 100 051111- 50419-2 120 051111- 50410-9 24 12,000 5" x 7/8" 051111- 50412-3 36 051111- 50420-8 50 051111- 50421-5 60 051111- 50422-2 80 051111- 50423-9 100 051111- 50424-6 120 051111- 50411-6 24 8,600 7" x 7/8 051111- 50426-0 36 051111- 50425-3 50 051111- 50427-7 60 051111- 50428-4 80 051125- 63799-2 ? 100 051111- 50430-7 ? 120 051111- 50432-1 ? 24 6,600 9-1/8" x 7/8" 051111- 50433-8 36 051111- 50434-5 ? 50 ? made-to-order 51773 see pages 72C77 for available accessories. tech tip weld blending mild steel for paint prep step 1 C fibre disc 982c grade 36+ step 2 C scotch-brite ? light grinding and blending disc sd on black ribbed pad step 3 C apply 3 mil paint results C productivity increase C abrasive cost improvement 2
coated abrasives 3m ? fibre discs (cont.) 3m ? cubitron ? ii fibre disc 982c ? 3m precision-shaped ceramic grain, engineered with ultra-sharp, fast cutting points that wear evenly, run cool, and optimize mineral breakdown to maximize life ? best in class for weld prep and removal on carbon steel applications upc grade max. rpm dia. x ctr. hole min./case 051141- 27400-3 36+ 13,300 4-1/2" x 7/8" 25/100 051141- 27631-1 60+ 051141- 27635-9 80+ 051141- 27401-0 36+ 12,000 5" x 7/8" 051141- 27632-8 60+ 051141- 27636-6 80+ 051141- 27402-7 36+ 8,600 7" x 7/8" 051141- 27633-5 60+ 051141- 27637-3 80+ 051141- 27403-4 36+ 6,600 9-1/8" x 7/8" 051141- 27634-2 60+ 051141- 27638-0 80+ tn quick change 051141- 27425-6 36+ 13,300 4-1/2" x 5/8 C11* 25/100 051141- 27639-7 60+ 051141- 27642-7 80+ 051141- 27404-1 36+ 12,000 5" x 5/8 C11* 051141- 27640-3 60+ 051141- 27643-4 80+ 051141- 27405-8 36+ 8,600 7" x 5/8 C11* 051141- 27641-0 60+ 051141- 27644-1 80+ gl quick change 051141- 27406-5 36+ 12,000 5" x 5/8 C11* 25/100 051141- 27724-0 60+ 051141- 27726-4 80+ 051141- 27407-2 36+ 8,600 7" x 5/8 C11* 051141- 27725-7 60+ 051141- 27727-1 80+ * quick change tinneman nut attachment tech tip use 3m ? red ribbed pads to optimize product life of 900 series fibre discsgrades 24 and 36. see pages 72C77 for available accessories. 3m ? fibre discs 985c ? 3m ? ceramic abrasive grain ? 3ms better choice for a long-lasting, premium disc for stainless steel ? includes a grinding aid for cooler running upc grade max. rpm dia. x ctr. hole min./case 051111- 55767-9 36 12,000 5" x 7/8" 25/100 051111- 55780-8 50 051111- 55776-1 60 051111- 55779-2 80 051111- 55971-0 24 8,600 7" x 7/8" 051111- 55972-7 36 051111- 55973-4 50 051111- 55974-1 60 051111- 55975-8 80 157186 606708 3 704804 704802 704803
see pages 72C77 for available accessories. 3m ? fibre discs (cont.) 4 3m ? cubitron ? ii fibre disc 987c ? 3m precision-shaped ceramic grain, engineered with ultra-sharp, fast cutting points that wear evenly, run cool, and optimize mineral breakdown to maximize life ? best in class for weld prep and removal on heat sensitive alloys such as stainless steel upc grade max. rpm dia. x ctr. hole min./case 051141- 27447-8 36+ 13,300 4-1/2" x 7/8" 25/100 051141- 27653-3 60+ 051141- 27657-1 80+ 051141- 27448-5 36+ 12,000 5" x 7/8" 051141- 27654-0 60+ 051141- 27658-8 80+ 051141- 27449-2 36+ 8,600 7" x 7/8" 051141- 27655-7 60+ 051141- 27659-5 80+ 051141- 27450-8 36+ 6,600 9-1/8" x 7/8" 051141- 27656-4 60+ 051141- 27660-1 80+ tn quick change 051141- 27469-0 36+ 13,300 4-1/2" 25/100 051141- 27661-8 60+ 051141- 27664-9 80+ 051141- 27467-6 36+ 12,000 5" 051141- 27662-5 60+ 051141- 27665-6 80+ 051141- 27468-3 36+ 8,600 7" 051141- 27663-2 60+ 051141- 27666-3 80+ gl quick change 051141- 27728-8 36+ 12,000 5" 25/100 051141- 27730-1 60+ 051141- 27732-5 80+ 051141- 27729-5 36+ 8,600 7" 051141- 27731-8 60+ 051141- 27733-2 80+ 3m ? fibre discs 988c ? 3m ? ceramic abrasive grain ? 3ms best premium disc for long-lasting performance for mild steel grinding upc grade max. rpm dia. x ctr. hole min./case 051111- 55712-9 36 13,300 4-1/2" x 5/8 C11* 25/100 051141- 27341-9 ? 36 12,000 5" x 5/8 C11* 100 051111- 55746-4 24 12,000 5" x 7/8" 25/100 051111- 55743-3 36 051111- 55742-6 50 051111- 60319-2 60 051111- 55740-2 80 051111- 55840-9 24 8,600 7" x 5/8 C11* 051111- 55715-0 36 051111- 55964-2 24 7" x 7/8" 051111- 55965-9 36 051111- 55966-6 40 051111- 55967-3 50 051111- 55739-6 60 051111- 55968-0 80 051111- 60314-7 24 50/100 051111- 55744-0 24 6,600 9-1/8" x 7/8" 25/100 051111- 55735-8 36 051111- 55733-4 50 ? made-to-order * quick change tinneman nut attachment 157187 coated abrasives 664626 664624 664625
see pages 72C77 for available accessories. 5 3m ? flap discs type 29 227097 type 27 227096 3m ? flap discs offer an unbeatable system for grinding and blending in one easy step. the construction wears away, exposing fresh mineral to extend disc life and provide consistent cut rates. great for weld grinding, blending, deburring, rust removal, surface prep and edge grinding on all types of metals. available in both t29 or t27 constructions with or without the 5/8C11 hub. selectflapdiscsforextendedlifeandsingle-stepgrinding/blendingonalltypesofmetals. product id mineral 4-1/2" x 7/8" 4-1/2" x 5/8C11 7" x 7/8" 7" x 5/8C11 t27 t29 t27 t29 t27 t29 t27 t29 good 546d aluminazirconia 577f aluminazirconia better 747d ceramic aluminum oxide blend best 947d ceramic abrasive grain 631570 coated abrasives 3m ? flap disc selection guide 624139
see pages 72C77 for available accessories. coated abrasives 6 3m ? flap discs 546d ? versatile alumina zirconia mineral works on a variety of metals and applications ? flexible x wt. cotton backing designed for fast cut on light duty grinding/finishing applications upc grade max. rpm dia. x ctr. hole qty./case type 29 051115- 28874-6 ? 24 13,300 4-1/2" x 7/8" 10 051115- 28875-3 ? 36 051115- 28876-0 40 051115- 28877-7 60 051115- 28878-4 80 051115- 28879-1 ? 120 051115- 28868-5 ? 24 4-1/2" x 5/8C11* 051115- 28869-2 ? 36 051115- 28870-8 40 051115- 28871-5 60 051115- 28872-2 80 051115- 28873-9 ? 120 051115- 28926-2 ? 24 8,600 7" x 7/8" 5 051115- 28927-9 ? 36 051115- 28928-6 40 051115- 28929-3 60 051115- 28930-9 80 051115- 28931-6 ? 120 051115- 28920-0 ? 24 7" x 5/8C11* 051115- 28921-7 ? 36 051115- 28922-4 40 051115- 28923-1 60 051115- 28924-8 80 051115- 28925-5 ? 120 ? made-to-order * quick change hub attachment 624139 3m ? flap discs 546d (cont.) upc grade max. rpm dia. x ctr. hole qty./case type 27 051141- 30598-1 ? 36 13,300 4-1/2" x 7/8" 10 051141- 30599-8 40 051141- 30600-1 60 051141- 30601-8 80 051141- 30602-5 ? 120 051141- 30593-6 ? 36 4-1/2" x 5/8C11* 051141- 30594-3 40 051141- 30595-0 60 051141- 30596-7 80 051141- 30597-4 ? 120 051141- 30603-2 ? 36 8,600 7" x 7/8" 5 051141- 30604-9 40 051141- 30605-6 60 051141- 30606-3 80 051115- 28917-0 ? 120 051141- 30607-0 ? 36 7" x 5/8C11* 051141- 30608-7 40 051141- 30609-4 60 051141- 30610-0 80 051115- 28919-4 ? 120 ? made-to-order * quick change hub attachment tech tip flap discs typically provide a finish one grade finer than they are graded. 3m ? flap discs (cont.)
see pages 72C77 for available accessories. coated abrasives 7 3m ? flap discs 577f ? versatile alumina zirconia mineral works on a variety of metals and applications ? durable yf wt. polyester backing designed for long life on the most heavy duty grinding applications upc grade max. rpm dia. x ctr. hole qty./case type 29 051141- 30983-5 36 13,300 4-1/2" x 5/8C11 10 051141- 30984-2 40 051141- 30985-9 60 051141- 30986-6 80 051141- 30987-3 36 4-1/2" x 7/8" 051141- 30988-0 40 051141- 30989-7 60 051141- 30990-3 80 051141- 30991-0 36 8,600 7" x 5/8C11 5 051141- 30992-7 40 051141- 30993-4 60 051141- 30994-1 80 051141- 30995-8 36 7" x 7/8" 051141- 30996-5 40 051141- 30997-2 60 051141- 30998-9 80 type 27 051141- 30951-4 36 13,300 4-1/2" x 5/8C11 10 051141- 30952-1 40 051141- 30953-8 60 051141- 30954-5 80 051141- 30955-2 36 4-1/2" x 7/8" 051141- 30956-9 40 051141- 30957-6 60 051141- 30958-3 80 051141- 30963-7 36 8,600 7" x 5/8C11 5 051141- 30964-4 40 051141- 30965-1 60 051141- 30966-8 80 051141- 30959-0 36 7" x 7/8" 051141- 30960-6 40 051141- 30961-3 60 051141- 30962-0 80 3m ? giant flap discs 577f ? versatile alumina zirconia mineral works on a variety of metals and applications ? durable yf wt. polyester backing designed for long life on the most heavy duty grinding applications ? 25% more flaps than standard 3m ? flap discs 577f upc grade max. rpm dia. x ctr. hole qty./case type 29 051141- 30999-6 36 13,300 4-1/2" x 5/8C11 10 051141- 31000-8 40 051141- 31001-5 60 051141- 31002-2 80 051141- 31003-9 36 4-1/2" x 7/8" 051141- 31004-6 40 051141- 31005-3 60 051141- 31006-0 80 051141- 31011-4 36 8,600 7" x 5/8C11 5 051141- 31012-1 40 051141- 31013-8 60 051141- 31014-5 80 051141- 31007-7 36 7" x 7/8" 051141- 31008-4 40 051141- 31009-1 60 051141- 31010-7 80 type 27 051141- 30967-5 36 13,300 4-1/2" x 5/8C11 10 051141- 30968-2 40 051141- 30969-9 60 051141- 30970-5 80 051141- 30971-2 36 4-1/2" x 7/8" 051141- 30972-9 40 051141- 30973-6 60 051141- 30974-3 80 051141- 30979-8 36 8,600 7" x 5/8C11 5 051141- 30980-4 40 051141- 30981-1 60 051141- 30982-8 80 051141- 30975-0 36 7" x 7/8" 051141- 30976-7 40 051141- 30977-4 60 051141- 30978-1 80 3m ? flap discs (cont.) 686009 721412
see pages 72C77 for available accessories. coated abrasives 8 3m ? flap discs 947d ? excellent option for stainless steel finishing ? 3m ? ceramic abrasive grain for exceptional cut and life on hard metals upc grade max. rpm dia. x ctr. hole qty./case type 27 051111- 61187-6 40 13,300 4-1/2" x 7/8" 10 051111- 61188-3 60 051111- 61189-0 80 051111- 61190-6 120 051111- 61191-3 40 4-1/2" x 5/8C11* 051111- 61192-0 60 051111- 61193-7 80 051111- 61194-4 120 051111- 61195-1 40 8,600 7" x 7/8" 5 051111- 61196-8 60 051111- 61197-5 80 051111- 61198-2 120 051111- 61199-9 40 7" x 5/8C11* 051111- 61200-2 60 051111- 61201-9 80 * quick change hub attachment 3m ? flap discs (cont.) 360834 3m ? flap discs 747d ? 3m ? ceramic aluminum oxide blend abrasive grain provides extended cut and life on hard metals upc grade max. rpm dia. x ctr. hole qty./case type 27 051111- 49613-8 36 13,300 4-1/2" x 7/8" 10 051111- 49614-5 50 051111- 49615-2 60 051111- 49616-9 80 051111- 49617-6 p120 051111- 55805-8 36 4-1/2" x 5/8C11* 051111- 61057-2 ? 50 051111- 61058-9 ? 60 051111- 61059-6 ? 80 051111- 61060-2 ? p120 051111- 49608-4 36 8,600 7" x 7/8" 051111- 49609-1 50 051111- 49610-7 60 051111- 49611-4 80 051111- 49612-1 ? 120 ? made-to-order * quick change tinneman nut attachment 84696 84696
see pages 72C77 for available accessories. 3m id anti- loading backing application metal type blending finishing stainless steel aluminum carbon steel titanium nickel alloy non-ferrous (brass/bronze) good nx yes c & d wt. paper 341d x wt. cloth better 236u yes c wt. paper 426u yes a wt. paper 363i f wt. paper 202dz j wt. cloth 348d x wt. cloth best 735u yes c wt. paper 763u f wt. paper 777f y wt. cloth 900dz j wt. cloth 3m ? stikit ? disc 202dz ? aluminum oxide on a durable j wt. cloth backing ? excellent for use on aluminum and brass ? open coat resists loading ? individual discs with liners upc grade diameter min./case paper backing 051111- 50450-5 80 5" 50/250 051111- 50451-2 p100 051111- 50452-9 p120 051111- 50453-6 p150 051111- 50454-3 p180 051111- 50455-0 p220 051111- 50459-8 80 6" 051111- 50460-4 p100 051111- 50461-1 p120 051111- 50462-8 p150 051111- 50463-5 ? p180 051111- 50464-2 p220 ? made-to-order 3m ? stikit ? discs 148265 attention: see backup pad maximum operating speed for the appropriate operating speed for the 3m ? stikit ? and psa discs. coated abrasives 9 3m ? stikit ? and psa discs 3m ? stikit ? and psa discs are designed to handle a wide range of sanding and finishing needs. these discs have a pressure sensitive adhesive coating on the back side for easy application and clean removal. 3m ? stikit ? and psa disc selection guide
see pages 72C77 for available accessories. 3m ? stikit ? discs (cont.) 3m ? stikit ? disc roll 236u ? aluminum oxide on a c wt. paper backing ? discs for paint, primer, wood, metal, plastic and fiberglass ? strong paper backing provides durability and increased cut rate ? open coat minimizes loading ? load resistant coating upc grade diameter discs/roll qty./case paper backing 051144- 86488-1 p80 5" 100 4 051144- 86489-8 p100 051144- 86490-4 p120 051144- 86491-1 p150 051144- 86492-8 p180 051144- 86493-5 p220 051144- 86494-2 p240 051144- 86495-9 p320 051144- 86496-6 p400 051144- 86497-3 p500 051144- 86468-3 p80 6" 051144- 86469-0 p100 051144- 86470-6 p120 051144- 86471-3 p150 051144- 86472-0 p180 051144- 86473-7 p220 051144- 86474-4 p240 051144- 86475-1 p320 051144- 86476-8 p400 051144- 86477-5 p500 209045 coated abrasives 10 3m ? stikit ? disc roll 341d ? aluminum oxide on a durable x wt. cloth backing ? resin bonded for heat resistance upc grade diameter discs/roll qty./case paper backing 051144- 21752-6 50 5" x nh 100 4 051144- 21751-9 60 051144- 21750-2 80 051144- 21749-6 p100 051144- 21748-9 p120 051144- 21746-5 p180 051144- 21762-5 60 6" x nh 051144- 21761-8 80 715118 3m ? nx disc roll ? aluminum oxide on a c wt. (p100Cp400) or d wt. (40, p60, p80) paper backing ? load resistant coating ? excellent for sanding on whitewood, primer, paint sealers and topcoats upc grade diameter min./case paper backing 051141- 31181-4 p80 5" x nh 100/4 051141- 31182-1 p100 051141- 31183-8 p120 051141- 31184-5 p150 051141- 31185-2 p180 051141- 31186-9 p220 051141- 27672-4 p240 051141- 27674-8 p320 051141- 27676-2 p400 051141- 31189-0 p80 6" x nh 100/4 051141- 31190-6 p100 051141- 31191-3 p120 051141- 31192-0 p150 051141- 31193-7 p180 051141- 31194-4 p220 051141- 27673-1 p240 051141- 27675-5 p320 051141- 27677-9 p400 paper backing with tabbed liner 051141- 31211-8 40 5" x nh 50/250 051141- 31212-5 p60 051141- 31219-4 40 6" x nh 051141- 31220-0 p60 13270
tech tip 3m ? disc finish and life (comparing grade 180) get the most out of your 900dz disc by pairing it with our 2-handed 3m ? random orbital sander (pn28337) best finish (fewest swirl marks) longest life (related to mineral dulling) 426u 900dz nx 777f 236u 341d 363i 202dz 735u 763u 763u 735u 202dz 363i 341d 236u 900dz nx 426u coarsest finish least life 3m ? stikit ? disc roll 426u ? silicon carbide abrasive on a flexible a wt. paper backing ? features a load resistant coating ? delivers good cut and excellent finish upc grade diameter discs/roll qty./case 051141- 27775-2 80 5" x nh 125 10 051141- 27776-9 100 051141- 27777-6 120 051141- 27778-3 150 175 6 051141- 27779-0 180 051141- 27780-6 220 051141- 27781-3 240 051141- 27782-0 280 051141- 27783-7 320 051141- 27784-4 400 051141- 27785-1 80 6" x nh 125 10 051141- 27786-8 100 051141- 27787-5 120 051141- 27788-2 150 175 6 051141- 27789-9 180 051141- 27790-5 220 051141- 27791-2 240 051141- 27792-9 320 3m ? stikit ? disc roll 363i ? aluminum oxide on an extra heavy f wt. paper backing ? resin bonded for heat resistance upc grade diameter discs/roll qty./case paper backing 051144- 21800-4 60 5" x nh 100 4 051144- 21799-1 80 051144- 21798-4 p100 051144- 21797-7 p120 051144- 21796-0 p150 051144- 21795-3 p180 051144- 21794-6 60 6" x nh 051144- 21793-9 80 051144- 21792-2 p100 051144- 21791-5 p120 051144- 21790-8 p150 051144- 21789-2 p180 105480 see pages 72C77 for available accessories. 3m ? stikit ? discs (cont.) attention: see backup pad maximum operating speed for the appropriate operating speed for the 3m ? stikit ? and psa discs. coated abrasives 11 715682
see pages 72C77 for available accessories. attention: see backup pad maximum operating speed for the appropriate operating speed for the 3m ? stikit ? and psa discs. coated abrasives 12 3m ? stikit ? disc roll 763u ? 3m ? ceramic aluminum oxide blend abrasive grain on a heavy f wt. paper backing upc grade diameter discs/roll qty./case paper backing 051144- 80942-4 60 5" x nh 100 4 051144- 80943-1 80 051144- 80944-8 p100 051144- 80945-5 p120 051144- 80946-2 60 6" x nh 051144- 80947-9 80 3m ? stikit ? disc 900dz ? high performance 3m ? ceramic abrasive grain on a j wt. backing ? open coat to reduce loading ? individual discs with liner upc grade diameter min./case paper backing 051111- 49639-8 80 5" x nh 50/250 051111- 49640-4 p100 051111- 49641-1 p120 051111- 49643-5 p150 051111- 49642-8 p180 051111- 49644-2 p220 3m ? stikit ? discs (cont.) 3m ? stikit ? disc/ disc roll 735u ? 3m ? ceramic aluminum oxide blend abrasive grain on a c wt. paper ? load-resistant coating ? sharp-cutting and durable ? ideal for wood, soft metals, fiberglass and solid surface upc grade diameter discs/roll qty./case disc rolls 051111- 51229-6 p80 5" x nh 100 4 051111- 51230-2 p100 051111- 51231-9 p120 051111- 51232-6 p150 051111- 51233-3 p180 051111- 51234-0 p220 paper backing with tabbed liner 051141- 20760-5 p80 5" x nh 50 5 051141- 20762-9 p100 051141- 20764-3 p120 051141- 20766-7 p150 051141- 20768-1 p180 051141- 20770-4 p220 051141- 24042-8 p80 6" x nh 051141- 24043-5 p100 051141- 24044-2 p120 051141- 24045-9 p150 051141- 24046-6 p180 051141- 24047-3 p220 735u
3m ? psa cloth disc 348d ? aluminum oxide on an x wt. cloth backing ? heavy-duty, cloth-backed discs for more aggressive applications ? provides excellent adhesion while removing easily upc grade diameter min./case cloth backing 051144- 20913-2 36 2" 50/200 051144- 20911-8 50 051144- 20910-1 60 051144- 20909-5 80 051144- 20908-8 p100 051144- 20907-1 p120 051144- 01335-7 40 3" 051144- 01334-0 50 051144- 01333-3 60 051144- 01332-6 80 051144- 01331-9 p100 051144- 01330-2 p120 051144- 20891-3 36 5" 50/250 051144- 20890-6 40 051144- 20889-0 50 051144- 20888-3 60 051144- 20887-6 80 051144- 20886-9 p100 051144- 20885-2 p120 051144- 20884-5 p150 051144- 20883-8 p180 051144- 20881-4 p240 051144- 21639-0 36 6" 051144- 21731-1 40 051144- 20879-1 50 051144- 20878-4 60 051144- 20877-7 80 051144- 20876-0 p100 051144- 21497-6 p120 051144- 20874-6 36 8" 051144- 20873-9 40 051144- 20871-5 60 051144- 20870-8 80 051144- 20868-5 p120 051144- 88906-8 36 12" 10 051144- 88905-1 40 051144- 88904-4 50 051144- 88903-7 60 051144- 88902-0 80 051144- 88901-3 p100 3m ? psa cloth disc 348d (cont.) upc grade diameter min./case 051144- 88890-0 36 16" 10 051144- 88889-4 40 051144- 88887-0 60 051144- 88886-3 80 051144- 88882-5 36 18" 051144- 88880-1 60 051144- 88878-8 36 20" 051144- 88877-1 40 051144- 88876-4 50 051144- 88875-7 60 051144- 88874-0 80 051144- 20802-9 36 24" 051144- 20801-2 40 051144- 20798-5 80 3m ? psa discs 3m ? psa disc 777f ? 3m ? ceramic aluminum oxide blend abrasive grain on a polyester cloth backing ? heavy-duty yf wt. backing provides great strength and flexibility ? provides long life and fast cut on multiple surfaces ? includes a grinding aid for cooler running upc grade diameter qty./case cloth backing 051144- 88869-6 36 12" 10 051144- 88873-3 40 051144- 88872-6 50 051144- 88871-9 60 051144- 88870-2 80 coated abrasives 13 see pages 72C77 for available accessories. 681776 715039
3m ? roloc ? cloth disc selection guide product id mineral features metal type grind- ing light grinding blend- ing deburr- ing good 361f aluminum oxide generalpurposegrinding,lightgrinding, blending,anddeburringonallmetals allmetals ? ? ? ? 461f silicon carbide idealforgrindingglass,titaniumand non-ferrousmetals titanium ? ? ? better 777f ceramic a/o*blend durableywt.clothbacking;grindingaid stainlesssteel, nickelalloy ? ? ? ? best 963g ceramic abrasive grain durablebacking carbonsteel ? ? ? ? 977f durable2-plybacking;grindingaid stainlesssteel, nickelalloy ? ? ? ? *a/o C aluminum oxide 3m ? roloc ? fiber disc selection guide product id mineral features metal type grind- ing light grinding blend- ing deburr- ing good 501c aluminum zirconia versatilediscforuseonawidevariety ofmetals;generalpurposegrinding, blendingandfinishingonallmetals allmetals ? ? ? better 785c ceramic a/o*blend excellentforstainlesssteel;grindingaid stainlesssteel ? ? ? best 983c/ 988c ceramic abrasive grain fastcutting;longlife;designedforavariety ofcarbonsteelapplications carbonsteel ? ? ? 988r uniquesingle-piececonstructionthatcan eliminatebuttondelaminationandenhance discperformance;cutthroughmetalstockto quicklylevelweldsandtakeontoughjobsin smallareas mildsteel ? ? ? *a/o C aluminum oxide see pages 72C77 for available accessories. coated abrasives 14 24/black 36/brown 50/green 60/orange 80/yellow 100/blue 120/white 150/black 180/brown 240/green 3m ? roloc ? disc button color/grade chart 3m ? roloc ? discs provide a fast, efficient method for grinding, blending, leveling and finishing on all types of metal. they lock securely in place with just a half twistanother half twist and theyre off. each disc is color coded by grade. (this does not include 3m roloc tsm products.) 3m ? roloc ? discs key: colored square indicates recommended usage. n mild steel n stainless steel optimum tool speeds to maximize 3m ? roloc ? disc cut rates and life material type disc size stainless aluminum steel titanium 1-1/2" 20,000rpm 30,000rpm 30,000rpm 9,000rpm 2" 15,000rpm 20,000rpm 20,000rpm 7,000rpm 3" 10,000rpm 15,000rpm 15,000rpm 4,500rpm 4" 8,000rpm 9,000rpm 9,000rpm 3,000rpm attachment product id tp tr tsm ts 361f ? ? ? 461f ? 777f ? ? ? 963g ? 977f ? 501c ? ? 785c ? 983c/988c ? 988r ? 3m ? roloc ? attachment system guide attachment dia. tp tr tsm ts 3/4" ? ? ? 1" ? ? ? ? 1-1/2" ? ? ? ? 2" ? ? ? ? 3" ? ? ? ? 4" ? ? ? tp tr tsm ts
3m ? roloc ? disc 361f n ? aluminum oxide on a yf wt. cloth backing ? general purpose grinding, blending and finishing on all metals upc grade max. rpm diameter min./case roloc tr (plastic button) 051144- 11412-2 36 30,000 1" 50/500 051144- 11411-5 50 051144- 11417-7 60 051144- 11416-0 80 051144- 11415-3 p100 051144- 11414-6 p120 051144- 11452-8 ? 24 30,000 1-1/2" 051144- 22396-1 36 051144- 11137-4 50 051144- 22397-8 60 051144- 22407-4 80 051144- 22408-1 p100 051144- 22409-8 p120 051144- 11000-1 24 25,000 2" 50/200 051144- 22398-5 36 051144- 22399-2 50 051144- 22400-5 60 051144- 22401-2 80 051144- 22402-9 p100 051144- 22403-6 p120 051144- 14559-1 p150 051144- 13873-9 p180 051144- 11419-1 p240 ? made-to-order 159104 3m ? roloc ? discs upc grade max. rpm diameter min./case roloc tr (plastic button) 051144- 22392-3 24 20,000 3" 50/200 051144- 22393-0 36 051144- 22394-7 50 051144- 22395-4 60 051144- 22404-3 80 051144- 22405-0 p100 051144- 22406-7 p120 051144- 82244-7 p150 051144- 11418-4 p240 051144- 76429-7 36 12,000 4" 25/100 051144- 11421-4 60 051144- 11420-7 80 roloc tsm (metal button) 051111- 49932-0 36 30,000 1-1/2" 50/500 051111- 49933-7 60 051111- 49934-4 80 051111- 51039-1 p100 051111- 51038-4 ? p120 051111- 49936-8 36 25,000 2" 50/200 051111- 49937-5 60 051111- 49938-2 80 051111- 51034-6 p100 051111- 49939-9 p120 051111- 51033-9 36 20,000 3" 051111- 49940-5 60 051111- 49941-2 80 051111- 49942-9 p100 051111- 49943-6 p120 roloc tp (metal button) 051111- 82401-4 40 25,000 2" 50/200 051111- 76806-6 60 051111- 76810-3 80 051111- 77115-8 ? 100 051111- 22393-0 36 20,000 3" 051111- 22394-7 50 051111- 22395-4 60 051111- 22404-3 80 051111- 22405-0 p100 ? made-to-order 3m ? roloc ? disc 361f (cont.) see pages 72C77 for available accessories. coated abrasives 15 n mild steel n stainless steel
524509 51704 3m ? roloc ? disc 461f ? silicon carbide on a yf wt. cloth backing gives stainless steel a brighter finish ? ideal for grinding glass, titanium and non-ferrous metals upc grade max. rpm diameter min./case roloc tr (plastic button) 051144- 12956-0 p60 25,000 2" 50/200 051144- 12954-6 p80 051144- 12957-7 p60 20,000 3" 051144- 12955-3 p80 3m ? roloc ? discs (cont.) 3m ? roloc ? disc 777f n ? 3m ? ceramic aluminum oxide blend abrasive grain ? cloth backing for durability ? grinding aid for cooler running upc grade max. rpm diameter min./case roloc tr (plastic button) 051144- 76622-2 36 30,000 1" 50/500 051144- 76623-9 50 051144- 76624-6 60 051144- 76625-3 80 051144- 80510-5 p120 051144- 76626-0 36 1-1/2" 051144- 76627-7 50 051144- 76628-4 60 051144- 14660-4 80 051144- 80511-2 p120 051144- 76629-1 36 25,000 2" 50/200 051144- 76630-7 50 051144- 76433-4 60 051144- 14661-1 80 051144- 80508-2 p100 051144- 80512-9 p120 051144- 76631-4 36 20,000 3" 051144- 76632-1 50 051144- 76633-8 60 051144- 76634-5 80 051144- 80509-9 p100 051144- 80513-6 p120 424847 3m ? roloc ? fibre disc 501c n ? aluminum zirconia C fibre ? versatile disc for use on a wide variety of metals upc grade max. rpm diameter min./case roloc tr (plastic button) 051141- 20645-5 36 25,000 2" 50/200 051111- 50748-3 50 051111- 50749-0 60 051111- 50750-6 80 051111- 50743-8 36 20,000 3" 051111- 50744-5 50 051111- 50745-2 60 roloc tsm (metal button) 051111- 50755-1 36 25,000 2" 50/200 051111- 50756-8 50 051111- 50757-5 60 051111- 50758-2 80 051111- 50751-3 36 20,000 3" 051111- 50752-0 50 051111- 50753-7 60 051111- 50754-4 80 159108 see pages 72C77 for available accessories. coated abrasives 16 n mild steel n stainless steel
3m ? roloc ? discs (cont.) threaded shaft 3m ? roloc ? disc pad 3m ? roloc ? disc or wheel 12873 3m ? roloc ? fibre disc 785c n ? 3 m ? ceramic aluminum oxide blend abrasive grain C fibre ? an excellent starting point for stainless steel ? includes a grinding aid for cooler running upc grade max. rpm diameter min./case roloc tr (plastic button) 051144- 85882-8 ? 24 20,000 3" 50/100 051144- 85883-5 36 051144- 85884-2 50 051144- 85885-9 60 051144- 85886-6 80 051144- 85887-3 p100 50/200 051144- 85888-0 p120 051144- 83690-1 36 12,000 4" 25/100 051144- 83691-8 50 051144- 83692-5 60 051144- 83693-2 80 051144- 83694-9 p100 051144- 83695-6 p120 ? made-to-order 431923 3m ? roloc ? disc 777f (cont.) upc grade max. rpm diameter min./case roloc tsm (metal button) 051111- 49949-8 36 25,000 2" 50/200 051111- 50253-2 60 051111- 50254-9 80 051111- 50255-6 100 051111- 50256-3 p120 051111- 50257-0 36 20,000 3" roloc tp (metal button) 051144- 76770-0 ? 60 25,000 2" 50/200 051144- 76743-4 ? 36 20,000 3" 051144- 76763-2 ? 051144- 76767-0 ? 50 roloc ts (plastic button) 051144- 76742-7 36 25,000 2" 50/200 051144- 76746-5 50 051144- 76750-2 60 051144- 76743-4 ? 36 20,000 3" 051144- 76747-2 ? 50 051144- 76751-9 60 051144- 76755-7 80 ? made-to-order see pages 72C77 for available accessories. coated abrasives 17 14494 n mild steel n stainless steel
3m ? roloc ? cloth disc 963g n ? 3m ? ceramic abrasive grain ? durable cloth backing upc grade max. rpm diameter min./case roloc tr (plastic button) 051144- 11422-1 ? 50 30,000 1" 50/500 051144- 11428-3 60 051144- 11427-6 80 051144- 11425-2 120 051144- 11450-4 36 1-1/2" 051144- 11448-1 60 051144- 11455-9 80 051144- 11454-2 ? 100 051144- 11453-5 120 051144- 11113-8 24 25,000 2" 50/200 051144- 11112-1 36 051144- 76436-5 40 051144- 11111-4 50 051144- 11110-7 60 051144- 11109-1 80 051144- 11107-7 100 051144- 11106-0 120 051144- 11108-4 24 20,000 3" 051144- 11105-3 36 051144- 11104-6 50 051144- 11103-9 60 051144- 11102-2 80 051144- 11101-5 100 051144- 11100-8 120 ? made-to-order 422747 3m ? roloc ? durable edge disc 977f n ? 3m ? ceramic abrasive grain ? features a durable backing and a grinding aid ? for grinding, blending and deburring of light to medium pressure applications for virtually all metal types upc grade max. rpm diameter min./case roloc tr (plastic button) 051144- 24094-7 36 25,000 2" 50/200 051144- 24096-1 50 051144- 24098-5 60 051144- 24100-5 80 051144- 24095-4 36 20,000 3" 051144- 24097-8 50 051144- 24099-2 60 051144- 24102-9 80 roloc tsm (metal button) 051141- 24005-3 36 30,000 1-1/2" 50/500 051141- 27348-8 ? 36 50/200 051141- 27393-8 50 051141- 27346-4 ? 60 051141- 27347-1 ? 36 25,000 2" 051141- 27392-1 ? 50 051141- 27345-7 ? 60 ? made-to-order 537156 n mild steel n stainless steel 3m ? roloc ? discs (cont.) see pages 72C77 for available accessories. coated abrasives 18
n mild steel n stainless steel 3m ? roloc ? discs (cont.) 3m ? roloc ? discs 988r n ? 3 m ? ceramic abrasive grain ? cuts through metal stock to quickly level welds and take on tough jobs in small areas ? a unique single-piece construction that can eliminate button delamination and enhance disc performance upc grade max. rpm diameter min./case roloc tr (plastic button) 051141- 20626-4 24 25,000 2" 50/200 051141- 20627-1 36 051141- 20628-8 50 051141- 20629-5 60 051141- 20630-1 80 051141- 20024-8 24 20,000 3" 051141- 20025-5 36 051141- 20026-2 50 051141- 20030-9 60 051141- 20027-9 80 3m ? roloc ? fibre disc 983c/988c n ? 3 m ? ceramic abrasive grain content for fast cutting and long life ? fibre backing for durability ? designed for high-pressure weld leveling and deburring upc grade max. rpm diameter min./case roloc tr (plastic button) 051144- 22352-7 36 25,000 2" 983c 50/200 051111- 50005-7 50 051144- 22353-4 60 051144- 22354-1 80 051144- 22349-7 36 20,000 3" 983c 051144- 85890-3 50 051144- 22350-3 60 051144- 22351-0 80 051111- 55753-2 36 12,000 4" 988c 25/100 051111- 55754-9 50 051111- 55755-6 60 051111- 55756-3 80 424850 356245 3m ? roloc ? disc 977f n ? 3m ? ceramic abrasive grain ? features a grinding aid ? excellent for stainless steel, titanium and high nickel alloys. upc grade max. rpm diameter min./case roloc tr (plastic button) 051144- 83587-4 36 25,000 2" 50/200 051144- 83588-1 60 051144- 83589-8 80 051144- 83590-4 ? 36 20,000 3" 051144- 83591-1 60 051144- 83592-8 80 roloc tsm (metal button) 051141- 24005-3 36 30,000 1-1/2" 50/500 051141- 24006-0 60 051141- 24003-9 36 25,000 2" 50/200 051141- 24004-6 60 ? made-to-order 14494 coated abrasives 19 see pages 72C77 for available accessories.
3m ? belts 3m is the one-stop shop for all of your coated abrasive metalworking belt needs! we offer a product tailored to nearly every application and performance level. to select the best product for your application, check out our easy-to-use belt selection guide. each tier of product offers best-in-class performance at various price points. once you have selected the product, use the availability guide to select your grade. the following section includes our most popular belt items, but remember, we can provide any size belt that you might need! tech tip keep things cool when working on heat sensitive alloys like stainless steel, nickel alloys and cobalt alloys, choose a product with a grinding aid. life cutrate az ceramic ao mineral backing flexible durable x j y abrasive speed recommendations for off-hand applications alloy belt speed (surface feet per minute) applicable belt grades cast iron 7,000 24C120 carbon steel 6,500 24C120 stainless steel 6,500C7,000 36C120 nickel alloys 6,000 36C120 titanium 2,500C3,000 36C180 aluminum 7,500C8,500 24C120 6,500C7,000 fine grades brass 7,000C8,000 36C180 rubber 4,500 36C180 glass 2,500C5,000 80C400 6,000C8,000 stone 7,000 36C180 3m ? coated belt availability guide 3m id mineral backing grinding aid use dry/wet 600 500 400 320 240 220 180 150 120 100 80 60 50 40 36 24 241e aluminum oxide xe dry p p p p p p ? 302d j dry p p p p p p p p p p ? ? 332d flex x dry p p p p p p p p ? ? 341d x dry p p p p p p p p ? ? ? ? ? ? 361f xf dry/wet p p p p p p p p ? ? ? ? ? ? 461f silicon carbide xf dry/wet p p p p p p p p p p p p p 577f alumina zirconia yf yes dry/wet ? ? ? ? ? ? ? ? ? ? 747d ceramic a/o* blend x yes dry p p p ? ? ? ? 777f yf yes dry/wet p p p p ? ? ? ? ? 963g ceramic yn dry/wet ? ? ? ? ? ? ? ? 966f yf dry/wet ? ? ? ? ? ? 977f yf yes dry/wet ? ? ? ? ? ? ? ? 984f precision shaped ceramic yf yes dry/wet ? ? ? *a/o C aluminum oxide see pages 72C77 for available accessories. coated abrasives 20 attention: belts are available in other grades and sizes. if you need a specific belt not listed, contact your 3m sales specialist or 3m authorized distributor.
how to use the coated abrasive belt selection guide 1.findthemachinetypethatyouwillrunthisbelton. 2.movedowntothemetaltypethatisbeingworkedon. 3. selecttheproductfromthelistofgood C better C bestfinishingbelts. 4.checktheavailabilityguideforthegrade. 5.findtheproductonthefollowingpagesforavailablesizes. 6. ifyoursizeisnotlisted,contactyour3mdistributor or3mrepresentativefororderinginstructions. 3m ? coated abrasive belt selection guide portable/ file tool coarse grade power grinding/ high pressure slack of belt sander stroke sander bench top belt machine backstand/ off hand centerless & roll grinding flat finishing dry wet dry wet carbon steel good 241e 577f 341d 341d 341d 341d 361f better 577f 963g 577f 577f 577f 577f 577f 577f 577f best 984f 984f 984f 984f 966f 966f 966f 966f finishing belt n/a n/a 341d/ trizact* 341d/ trizact* 3xxd**/ trizact* 777f/ trizact* trizact* 461f 461f stainless steel good 577f 341d 577f 577f 341d 361f better 577f 577f 777f 777f 777f 577f 577f 577f 577f best 984f 984f 747d 984f 984f 977f 966f 984f 984f finishing belt n/a n/a trizact* trizact* 3xxd**/ trizact* 777f/ trizact* trizact* 461f/ trizact* 461f/ trizact* aluminum, brass, bronze good 241e 577f 341d 361f better 577f 963g 577f 577f 577f 577f 577f 577f 577f best 984f 984f 984f 984f finishing belt n/a n/a 341d/ trizact* 341d/ trizact* 3xxd**/ trizact* 341d/ trizact* 461f 461f 461f cobalt and nickel alloys good 577f 577f 577f 577f 577f better 577f 577f 777f 777f 777f 577f 577f 777f 777f best 984f 984f 984f 984f 977f 966f 984f 984f finishing belt n/a n/a trizact* trizact* 3xxd**/ trizact* 777f/ trizact* trizact* 461f 461f titanium good 461f 461f 461f n/a 461f better 577f 577f 577f 577f 577f 577f n/a 577f best 984f 984f 984f 984f 966f n/a 966f finishing belt n/a n/a 461f/ trizact* 461f/ trizact* 3xxd**/ trizact* trizact* n/a 461f *for specific trizact product recommendations, see page22. **3xxd: choosefrom302d, 332dand341ddependinguponbackingflexibilityneededfor application. coated abrasives 21 see pages 72C77 for available accessories. note for the ultimate in performance for coarse grade grinding in any application, be sure to try the latest innovation: 3m ? cubitron ? ii metalworking belts 984f.
3m ? trizact ? belt availability guide 3m id mineral backing description use dry/wet a grade 300 160 110 100 90 80 65 60 45 35 30 20 16 10 6 5 3 217ea aluminum oxide flex. j wt. low pressure dry ? ? ? ? ? ? ? 237aa aluminum oxide semi flex. x wt. low-med pressure dry ? ? ? ? ? ? ? ? 253fa aluminum oxide stiff x wt. low-med pressure wet ? ? ? ? ? ? ? 305ea aluminum oxide flex. j wt. fine finishing dry ? ? 307ea aluminum oxide flex. j wt. low-med pressure dry ? ? ? ? ? ? ? 327dc aluminum oxide semi flex. x wt. low pressure dry ? ? ? ? ? ? 337dc aluminum oxide semi flex. x wt. med pressure dry ? ? ? ? ? ? 347fc aluminum oxide semi flex. x wt. high pressure wet/dry ? ? ? ? ? ? 363fc aluminum oxide stiff yf wt. med-high pressure wet ? ? ? ? ? ? 407ea silicon carbide flex. j wt. low-med pressure dry ? ? ? ? 463fc silicon carbide stiff yf wt. med-high pressure wet ? ? ? ? ? 953fa ceramic stiff yf wt. med-high pressure wet ? ? ? ? ? ? ? ? ? ? 3m ? trizact ? belt selection guide portable tools centerless/roll grinder/ tool post (dry) stroke/ platen sander backstand, robotic flat finisher med. pressure lt. pressure dry wet dry wet mild steel, stainless, nickel, cobalt alloys 307ea 237aa 347fc 237aa 237aa 217ea 237aa 253fa 237aa 327dc 363fc/463fc 347fc 307ea 237aa 347fc 363fc 347fc 347fc 463fc/953fa 337dc 327dc 463fc aluminum, brass, copper 217ea 237aa 347fc 237aa 217ea 237aa 253fa 237aa 327dc 363fc/463fc 237aa 307ea 237aa 347fc 363fc/463fc 347fc 347fc 347fc 337dc 327dc titanium 237aa, 347fc, 407ea 407ea, 347fc 363fc/463fc 407ea 237aa, 337dc, 407ea 217ea, 327dc, 407ea 237aa 363fc/463fc chrome 347fc 327dc 347fc 363fc/463fc 953fa see pages 72C77 for available accessories. coated abrasives 22 attention: belts are available in other grades and sizes. if you need a specific belt not listed, contact your 3m sales specialist or 3m authorized distributor.
241e ? aluminum oxide on an xe wt. cloth backing ? high strength backing for tougher applications ? use with 3m ? file belt sander upc grade w x l min./case portable tool 051144- 26733-0 60 1/4" x 24" 50/200 051144- 26732-3 80 051144- 26731-6 120 051144- 31170-5 60 1/2" x 12" 051144- 26894-8 ? 80 051144- 26892-4 ? 120 051144- 72227-3 ? 60 1/2" x 18" 051144- 72228-0 80 051144- 72229-7 ? 120 051144- 26725-5 ? 50 1/2" x 24" 051144- 26723-1 60 051144- 26720-0 80 051144- 26719-4 100 051144- 26717-0 ? 120 051144- 26715-6 180 051144- 26714-9 220 051144- 14756-4 60 3/4" x 18" 051144- 14519-5 80 051144- 14667-3 120 ? made-to-order 51721 3m ? belts 302d ? aluminum oxide mineral ? flexible belt for blending and finishing contoured and complex parts ? works great on most metals ? grades 60, 80, p100Cp600 upc grade w x l" min./case 051141- 30858-6 60 2" x 118" 25/50 051141- 30861-6 80 051141- 30864-7 p100 051141- 30867-8 p120 051141- 30870-8 p150 051141- 30873-9 p180 051141- 30876-0 p220 051141- 30879-1 p240 coated abrasives 23 see pages 72C77 for available accessories. 302d (cont.) upc grade w x l" min./case 051141- 30882-1 p280 2" x 118" 25/50 051141- 30885-2 p320 051141- 30888-3 p400 051141- 30891-3 p500 051141- 30894-4 p600 051141- 30779-4 60 2" x 132" 051141- 30710-7 80 051141- 30713-8 p100 051141- 30716-9 p120 051141- 30719-0 p150 051141- 30722-0 p180 051141- 30725-1 p220 051141- 30728-2 p240 051141- 30731-2 p280 051141- 30734-3 p320 051141- 30737-4 p400 051141- 30740-4 p500 051141- 30743-5 p600 051141- 30859-3 60 3" x 118" 051141- 30862-3 80 051141- 30865-4 p100 051141- 30868-5 p120 051141- 30871-5 p150 051141- 30874-6 p180 051141- 30877-7 p220 051141- 30880-7 p240 051141- 30883-8 p280 051141- 30886-9 p320 051141- 30889-0 p400 051141- 30892-0 p500 051141- 30895-1 p600 051141- 30780-0 60 3" x 132" 051141- 30711-4 80 051141- 30714-5 p100 051141- 30717-6 p120 051141- 30720-6 p150 051141- 30723-7 p180 051141- 30726-8 p220 051141- 30729-9 p240 051141- 30732-9 p280 051141- 30735-0 p320 051141- 30738-1 p400 051141- 30741-1 p500 051141- 30744-2 p600
332d ? aluminum oxide mineral ? semi-flexible x wt. backing provides good durability when working on contoured parts ? works great on most metals ? grades 60, 80, p100Cp400 upc grade w x l" min./case 051141- 30776-3 60 2" x 132" 25/50 051141- 30746-6 80 051141- 30749-7 p100 051141- 30752-7 p120 051141- 30755-8 p150 051141- 30758-9 p180 051141- 30761-9 p220 051141- 30764-0 p240 051141- 30767-1 p280 051141- 30770-1 p320 051141- 30773-2 p400 051141- 30777-0 60 3" x 132" 051141- 30747-3 80 051141- 30750-3 p100 051141- 30753-4 p120 051141- 30756-5 p150 051141- 30759-6 p180 051141- 30762-6 p220 051141- 30765-7 p240 051141- 30768-8 p280 051141- 30771-8 p320 051141- 30774-9 p400 tech tip select the right belt for your job. choose from 302d, 332d and 341d depending upon backing flexibility needed for application as illustrated below: more flexible more durable 302d 332d 341d contour surface shaped part flat surface see pages 72C77 for available accessories. coated abrasives 24 3m ? belts (cont.)
coated abrasives 25 see pages 72C77 for available accessories. 3m ? belts (cont.) 341d (cont.) upc grade w x l min./case backstand, benchtop, portable tool 051144- 26408-7 36 2-1/2" x 60" 10/50 051144- 26400-1 60 25/50 051144- 26396-7 80 051144- 26388-2 p120 051144- 26857-3 60 3-1/2" x 15-1/2" 10/50 051144- 26856-6 80 891040- 02663-0 p120 891040- 01436-1 36 4" x 24" 25 891040- 01439-2 60 50 891040- 01440-8 80 051144- 33647-0 60 4 " x 132 " 25 891040- 01454-5 36 6" x 48" 10/20 891040- 01455-2 40 891040- 01456-9 50 891040- 01457-6 60 891040- 10454-3 80 20 891040- 10455-0 p100 891040- 10456-7 p120 051144- 26517-6 p150 051144- 26515-2 p180 051144- 26513-8 p240 051144- 74271-4 p120 37" x 60" 5 051144- 14420-4 80 37" x 75" 3 051144- 33061-4 p120 5 051144- 14508-9 p180 51724 341d ? aluminum oxide on an x wt. cloth backing ? excellent all-around abrasive belt for blending and finishing upc grade w x l min./case backstand, benchtop, portable tool 051144- 26614-2 36 1" x 42" 50/200 051144- 31823-0 50 891040- 01450-7 60 25/100 891040- 01451-4 80 891040- 01452-1 p100 891040- 01453-8 p120 051144- 26602-9 p150 50/200 051144- 26601-2 p180 051144- 26599-2 p240 051144- 26597-8 p320 051144- 26443-8 36 1-1/2" x 60" 10/50 051144- 26441-4 40 051144- 26438-4 60 25/50 051144- 26436-0 80 051144- 26571-8 36 2" x 48" 10/50 051144- 26568-8 50 051144- 26564-0 60 25/50 051144- 26562-6 80 051144- 26561-9 p100 051144- 26560-2 p120 051144- 26424-7 50 2" x 60" 10/50 051144- 33640-1 60 25/50 051144- 33639-5 80 051144- 33667-8 p120 051144- 26320-2 36 2" x 72" 10/50 051144- 26316-5 60 25/50 051144- 33067-6 80 051144- 26312-7 p120 051144- 26309-7 p180 051144- 81752-8 p240 407921 attention: belts are available in other grades and sizes. if you need a specific belt not listed, contact your 3m sales specialist or 3m authorized distributor.
see pages 72C77 for available accessories. coated abrasives 26 577f ? alumina zirconia on a yf wt. cloth backing ? resin bonded for heat resistance ? features a grinding aid for cooler grinding ? can be run wet or dry upc grade w x l qty./case 051141- 30690-2 60 1/4" x 18" 50/200 051141- 30691-9 80 051141- 30708-4 120 051141- 30694-0 60 1/4" x 24" 051119- 05580-1 80 051141- 30695-7 120 051111- 68668-3 60 1/2" x 12" 051111- 68695-9 80 051141- 30709-1 120 051141- 30686-5 36 1/2" x 18" 051119- 63081-7 60 051119- 82035-5 80 051141- 30689-6 120 051141- 30693-3 36 1/2" x 24" 051111- 68669-0 60 051111- 68696-6 80 051111- 69436-7 120 051141- 30687-2 36 3/4" x 18" 051115- 19553-2 60 051125- 19076-3 80 051141- 30688-9 120 051125- 16745-1 60 3/4" x 20-1/2" 051111- 68697-3 80 051125- 22333-1 120 051119- 71425-8 60 1" x 18" 051125- 23878-6 80 051141- 30692-6 120 051115- 19554-9 60 2" x 48" 25/50 051119- 05579-5 80 051125- 11238-3 120 051141- 30699-5 36 2" x 60" 051111- 69103-8 60 051141- 30703-9 80 051141- 30704-6 120 051141- 30698-8 36 2" x 72" 051111- 69104-5 60 051141- 30701-5 80 051141- 30697-1 120 3m ? belts (cont.) 361f ? aluminum oxide on an xf wt. backing ? durable belt with a tough polyester backing that can be used wet or dry ? ideal use in the grinding of sheets and coils, centerless and hand tool applications upc grade w x l min./case backstand, benchtop, portable tool 051111- 67159-7 ? p180 4" x 90" 50 051111- 67179-5 ? p320 051111- 68840-3 ? p150 8" x 135" 20 051111- 68841-0 ? p180 051111- 51215-9 p180 37" x 75" 5 051111- 68847-2 ? 80 52" x 75" 051111- 69422-0 ? p400 051119- 84596-9 ? 60 6" x 90" 20 051115- 27707-8 ? p220 6" x 90" 051125- 09948-6 ? p320 8" x 135" 051144- 14773-1 80 37" x 60" 2 051144- 14905-6 p100 5 051144- 11519-8 p120 051144- 76939-1 p150 051144- 11515-0 p180 051144- 76923-0 p220 051144- 81215-8 p100 37" x 75" 051144- 76942-1 ? p120 051144- 80037-7 p150 ? made-to-order 407921 407921 407921 461f ? silicon carbide mineral ? durable cloth-backed belts ? for heavy duty grinding to fine finishing ? resistant to tearing and will not easily nick upc grade w x l min./case backstand, benchtop, portable tool 051111- 67404-8 ? p220 4" x 118" 50 051111- 67405-5 ? 4" x 132" 051111- 67408-6 ? p320 051125- 23665-2 ? p400 4" x 64" 50 051125- 67387-4 p100 4" x 106" 5/5 051144- 04337-8 p80 4" x 106" 051144- 04335-4 ? p120 50 ? made-to-order
coated abrasives see pages 72C77 for available accessories. attention: belts are available in other grades and sizes. if you need a specific belt not listed, contact your 3m sales specialist or 3m authorized distributor. coated abrasives 27 3m ? belts (cont.) 577f (cont.) upc grade w x l qty./case 051111- 67602-8 36 2" x 132" 25/50 051141- 30702-2 50 051111- 69105-2 60 051111- 69108-3 80 051141- 30696-4 120 051119- 64999-4 36 2-1/2" x 60" 051111- 69106-9 60 051125- 12707-3 80 051141- 30706-0 120 051111- 69099-4 36 3" x 132" 25/50 051119- 82066-9 50 051111- 69569-2 60 051111- 69571-5 80 051111- 67681-3 120 051119- 67701-0 ? 60 3-1/2" x 15-1/2" 50 051119- 58968-9 ? 80 051119- 67700-3 ? 120 051111- 67604-2 36 4" x 132" 25 051115- 27562-3 50 051111- 69570-8 60 051111- 69573-9 80 051125- 23987-5 120 051111- 69445-9 60 6" x 48" 20 051119- 83855-8 80 051141- 30707-7 120 051111- 69440-4 36 37" x 60" 2 051111- 68691-1 60 051111- 69111-3 80 051111- 69115-1 120 5 051125- 22740-7 180 051119- 61101-4 36 37" x 75" 2 051111- 68692-8 60 051111- 69112-0 80 051111- 67688-2 120 5 051125- 09283-8 180 ? made-to-order 747d ? 3m ? ceramic aluminum oxide blend abrasive grain on an x wt. cloth backing ? use for offhand heat sensitive stainless steel applications ? grinding aid enhances performance on stainless steel and other exotic alloys ? well suited for stroke sanding applications upc grade w x l min./case 051111- 67749-0 ? 50 3" x 9-1/2" 200 051111- 67759-9 ? 60 051111- 67789-6 ? p100 051111- 67806-0 ? p120 051111- 67807-7 ? p120 3" x 118" 50 051115- 27355-1 ? 60 3" x 132" 051111- 68923-3 ? p120 051111- 67751-3 ? 50 6" x 264" 10 051111- 67766-7 ? 60 051111- 67778-0 ? 80 20 051125- 20535-1 ? p100 051111- 67812-1 ? p120 051144- 85846-0 ? 60 6" x 274" 051111- 67779-7 ? 80 051111- 67767-4 ? 60 6" x 300" 10 051111- 67781-0 ? 80 20 051111- 67813-8 ? p120 051115- 19560-0 ? 50 6" x 355" 10 10 051111- 67755-1 ? 50 6" x 360" ? made-to-order 407921
attention: belts are available in other grades and sizes. if you need a specific belt not listed, contact your 3m sales specialist or 3m authorized distributor. see pages 72C77 for available accessories. coated abrasives 28 777f ? 3m ? ceramic aluminum oxide blend abrasive grain on a yf wt. cloth backing ? contains grinding aid which enhances performance on stainless steel and other exotic alloys ? can be run wet or dry upc grade w x l min./case backstand, benchtop, portable tool 051144- 84403-6 60 1/4" x 18" 200 051144- 85318-2 80 051144- 19579-2 p120 051144- 84412-8 40 1/4" x 24" 051144- 80253-1 60 051144- 77642-9 80 051144- 82229-4 p120 051111- 69457-2 60 1/2" x 12" 051144- 85372-4 80 051111- 69604-0 p120 051144- 84301-5 36 1/2" x 18" 051144- 84409-8 40 051144- 80551-8 60 051144- 80232-6 80 051144- 84304-6 p120 051144- 77643-6 36 1/2" x 24" 051144- 82342-0 40 051144- 77408-1 50 051144- 77065-6 60 051144- 77491-3 80 051144- 81064-2 p120 051144- 84302-2 36 3/4" x 18" 051144- 84404-3 60 051144- 77992-5 80 051144- 84303-9 p120 051144- 80486-3 60 3/4" x 20-1/2" 051144- 80686-7 80 051125- 23897-7 60 1" x 18" 051144- 85319-9 80 051141- 30705-3 p120 051144- 76527-0 40 1" x 42" 50/200 051144- 77512-5 60 051144- 14895-0 80 051144- 84416-6 60 1-1/2" x 60" 25/50 051144- 76731-1 80 051144- 82022-1 p120 3m ? belts (cont.) 777f (cont.) upc grade w x l min./case backstand, benchtop, portable tool 051144- 76738-0 36 2" x 48" 10/50 051144- 76519-5 60 25/50 051144- 14896-7 80 051144- 85393-9 p120 50 051144- 77663-4 36 2" x 60" 051144- 77152-3 60 051144- 84296-4 80 051144- 85377-9 p120 051144- 76531-7 36 2" x 72" 051144- 80286-9 60 051144- 14884-4 80 051144- 81767-2 p120 051144- 14264-4 36 2" x 132" 051144- 14899-8 50 051144- 82231-7 60 051144- 14534-8 80 051144- 81687-3 p120 051144- 84315-2 p180 051144- 76532-4 36 2-1/2" x 60" 051144- 77825-6 40 051144- 76680-2 60 051144- 76686-4 80 051115- 27389-6 p120 051144- 76533-1 36 3" x 132" 25 051111- 69455-8 50 051144- 76520-1 60 051144- 76514-0 80 051144- 80028-5 p120 50 051144- 85762-3 p180 051144- 77336-7 36 3-1/2" x 15-1/2" 051144- 77334-3 50 051144- 77476-0 60 051144- 77333-6 80 051144- 84306-0 100 051144- 84307-7 p120 051144- 85320-5 p180 051144- 76534-8 36 4" x 132" 25 051111- 67851-0 50 051144- 80707-9 60 051144- 76515-7 80 25/50 051141- 30700-8 p120 25 407921 686785
see pages 72C77 for available accessories. coated abrasives 29 963g ? 3m ? ceramic abrasive grain on a yn wt. cloth backing ? water-resistant polyester cloth backing for heavy grinding ? can be run wet or dry upc grade w x l qty./case backstand, benchtop 051144- 74228-8 ? 24 2" x 132" 50 051111- 68163-3 60 50 051144- 74229-5 ? 24 3" x 132" 25 051144- 74207-3 36 l-flex 051144- 74324-7 60 051144- 13715-2 80 l-flex 051111- 68109-1 ? 24 4" x 132" 051144- 74209-7 36 051144- 74330-8 40 051144- 74325-4 60 051144- 84491-3 ? 36 6" x 132" 10 051111- 68168-8 ? 60 20 ? made-to-order 3m ? belts (cont.) 966f ? 3m ? ceramic abrasive grain on a yf wt. cloth backing ? water-resistant polyester cloth backing ? resin bonded for heat resistance ? designed for wet centerless grinding applications on carbon steel, heat sensitive high nickel alloys, titanium and stainless steel ? ideal for stripping chrome from old parts upc grade w x l qty./case 051119- 09003-1 ? 36 3" x 132" 25 051119- 78104-5 36 4" x 132" 051119- 10654-1 ? 80 051119- 78105-2 ? 80 sine 051115- 27128-1 60 4" x 132" 051111- 68321-7 ? 36 9" x 120" 10 051115- 27315-5 50 051125- 14381-3 60 051111- 68326-2 ? 80 051115- 27404-6 ? 80 l-flex 20 051125- 12989-3 ? 40 12 x 144" 5 051115- 27990-4 50 051119- 83152-8 ? 60 051135- 13609-6 24 belt sizes made to order. specify upc, grade and belt size (w" x l") determined by belt size. 051135- 13660-7 36 051135- 13684-3 40 051135- 13683-6 50 051135- 13682-9 60 051135- 13681-2 80 ? made-to-order 312049 407921 777f (cont.) upc grade w x l min./case backstand, benchtop, portable tool 051144- 82313-0 36 6" x 48" 10/20 051144- 80176-3 50 051144- 76679-6 60 20 051144- 76733-5 80 051144- 82153-2 p120 051125- 33828-8 36 37" x 60" 2 051115- 27354-4 60 051144- 77351-0 80 051144- 80450-4 p120 5 051111- 69127-4 p180 051119- 75481-0 36 37" x 75" 2 051111- 69122-9 60 051144- 82930-9 80 051144- 84947-5 p120 5 051111- 69128-1 p180
see pages 72C77 for available accessories. attention: belts are available in other grades and sizes. if you need a specific belt not listed, contact your 3m sales specialist or 3m authorized distributor. coated abrasives 30 3m ? belts (cont.) 977f ? 3m ? ceramic abrasive grain on a yf wt. cloth backing ? recommended for both wet or dry grinding of stainless steel and high nickel alloys ? works well in all grinding pressures upc grade w x l qty./case 051111- 68989-9 ? 60 1" x 11" 500 051111- 68602-7 ? 80 051111- 68527-3 ? 40 1" x 42" 200 051115- 27684-2 ? 120 051111- 68530-3 ? 40 1" x 132" 100 051111- 68548-8 ? 50 051111- 68583-9 ? 60 200 051115- 27336-0 ? 80 051111- 68532-7 ? 40 2" x 48" 50 051119- 09500-5 ? 60 051144- 85389-2 36 2" x 72" 051111- 69519-7 ? 40 051111- 68552-5 ? 50 051144- 85383-0 60 051144- 84008-3 80 051111- 69514-2 120 051111- 68534-1 ? 40 l-fex 2" x 118" 051111- 68535-8 ? 40 051144- 83522-5 36 2" x 132" 051111- 68537-2 ? 40 051144- 85015-0 50 051144- 85384-7 60 051144- 85769-2 80 051111- 68631-7 ? 100 051111- 68640-9 ? 120 051111- 68485-6 ? 24 3" x 132" 25 051111- 68506-8 ? 36 l-fex 051111- 68507-5 ? 36 051144- 82798-5 40 051111- 68557-0 ? 50 l-fex 051111- 69165-6 ? 50 051111- 69166-3 ? 60 051119- 08175-6 ? 60 full fex 051144- 85378-6 80 051119- 77855-7 ? 100 50 051111- 68645-4 ? 120 159098 977f (cont.) upc grade w x l qty./case 051111- 69522-7 ? 60 3-1/2" x 15-1/2" 50 051125- 18646-9 ? 80 051125- 23841-0 ? 100 051111- 68593-8 ? 60 4" x 90" 051125- 10597-2 ? 80 051125- 11234-5 ? 120 051144- 85390-8 ? 36 l-fex 4" x 132" 25 051111- 68511-2 ? 36 051119- 65751-7 ? 40 051125- 15945-6 ? 40 full fex 051111- 69351-3 ? 50 051111- 69352-0 ? 50 l-fex 051115- 27540-1 ? 60 051111- 68594-5 ? 60 l-flex 051111- 68619-5 ? 80 051144- 85387-8 ? 40 l-fex 6" x 132" 20 051125- 17018-5 ? 40 full fex 051111- 68518-1 ? 36 sine 10 051115- 19611-9 ? 36 flm 051111- 68596-9 ? 60 20 051115- 27541-8 ? 80 051111- 68524-2 ? 36 8" x 132" 051111- 68597-6 ? 60 ? made-to-order 407921
see pages 72C77 for available accessories. coated abrasives 31 3m ? cubitron ? ii metalworking belt 984f (cont.) upc grade w x l min./case 051141- 55068-8 36+ 2" x 60" 10/50 051141- 55036-7 ? 60+ 25/50 051141- 27516-1 36+ 2" x 72" 50 051141- 55034-3 60+ 25/50 051141- 55057-2 80+ 051141- 55067-1 36+ 2" x 118" 10/50 051141- 27460-7 36+ 2" x 132" 50 051141- 55044-2 60+ 25/50 051141- 55056-5 80+ 051141- 55069-5 36+ 2-1/2" x 60" 10/50 051141- 27853-7 ? 60+ 25/50 051141- 55058-9 ? 80+ 051141- 27461-4 36+ 3" x 132" 25 051141- 55043-5 60+ 051141- 55051-0 80+ 051141- 55042-8 60+ 3-1/2" x 15-1/2" 50 051141- 55049-7 80+ 051141- 27462-1 36+ 4" x 132" 25 051141- 55070-1 36+ 5" x 132" 051141- 55071-8 36+ 6" x 48" 10/20 051141- 55037-4 60+ 20 051141- 55059-6 ? 80+ 051141- 55035-0 60+ 6" x 60" 051141- 27515-4 36+ 6" x 132" 10/20 051141- 55072-5 36+ 8" x 107" 5/10 051141- 27513-0 36+ 8" x 132" 10 051141- 55063-3 ? 80+ 37" x 60" 2 051141- 55062-6 ? 80+ 37" x 75" ? made-to-order 3m ? cubitron ? ii metalworking belt 984f ? 3m precision-shaped grain ? average up to 30% faster cutting on hard-to-grind metals than the next-best competitive belt ? lasts up to 4 times as long as conventional ceramic aluminum oxide belts ? cuts cooler diverts heat from the work piece and belt to the swarf ? helps eliminate burnishing and heat stress upc grade w x l min./case 051141- 55032-9 60+ 1/4" x 24" 50/200 051141- 55053-4 80+ 1/2" x 12" 051141- 27511-6 36+ 1/2" x 18" 051141- 55041-1 60+ 051141- 55048-0 80+ 051141- 27512-3 36+ 1/2" x 24" 051141- 55031-2 60+ 051141- 55054-1 80+ 051141- 55040-4 ? 60+ 1/2" x 42" 200 051141- 55064-0 36+ 3/4" x 18" 50/200 051141- 55030-5 60+ 051141- 55047-3 80+ 051141- 55065-7 36+ 3/4" x 20-1/2" 051141- 55055-8 80+ 051141- 55046-6 60+ 1" x 11" 50/500 051141- 55050-3 ? 80+ 051141- 55060-2 ? 80+ 1" x 42" 25/200 051141- 27514-7 36+ 1" x 132" 100 051141- 55039-8 60+ 25/200 051141- 55052-7 80+ 051141- 55066-4 ? 36+ 1-1/2" x 132" 25/50 ? made-to-order 3m ? belts (cont.) 407921 3m precision shaped grain sharpens as it wears compared to conventional ceramic abrasive grain so 3m ? cubitron ? ii abrasive belts last longer! conventional ceramic 3m ? cubitron ? ii triangular-shaped grain (right) is electrostatically oriented to form sharp peaks, each acting like individual cutting tools that wear evenly for super long life and consistency. precision-shaped grain conventional grain w eight of metal removed (grams) t ime cumulative cut, ss304: t ypical end p oint 0 2 4 6 8 10 12 14 16 18 20 600 500 400 300 200 100 0 3m ? cubitron ? ii 984f competitor 1 competitor 2 t ypical endpoints 3m precision shaped grain
attention: belts are available in other grades and sizes. if you need a specific belt not listed, contact your 3m sales specialist or 3m authorized distributor. 3m ? trizact ? abrasive belts theunique microreplicatedconstructionusedin3m ? trizact ? abrasivescandeliverconsistent, predictablefnishes, higher, moreeven rates ofcut, coolergrindingandfnishing temperatures, andreducedprocessingsteps. 3minvented microreplication technology, which isthescienceof creatingsmall, precisely shapedthree-dimensionalstructuresandthenreproducingthemonavarietyofsurfaces. trizact abrasivegrade fepa (p-grade) a5 p3000 a6 a10 p1500 a16 p1200 a20 p1000 a30 p600 a35 a45 p400 p320 a60 a65 a75 p240 a80 a90 p220 a100 p180 a110 p180 a130 p150 a160 p120 trizact abrasive grading system theuniqueconstructionof trizact abrasivesrequiresadifferent gradingsystem. gradeisdefnedbythe average particlesizein micronsandbeginswithan a. the difference is in the construction three-dimensionalstructuresuniformlydistributedoverthe entiresurfaceof3m ? trizact ? abrasives(left)ensureconsistent performanceand eliminatebelt-to-belt variation. conventional abrasives(right), which featurerandomlyarrangedminerals, wearandfnish unevenly. trizact abrasives allowyoutosay goodbye to erratic, inconsistent fnishes generatedbyconventional coatedabrasives. hereswhy: coated abrasives 32 3m ? trizact ? abrasives havethree-dimensionalstructures containingmultiplelayersofabrasivemineral. asthese pyramid-likestructures wear, fresh, sharpmineralisexposed. conventionalabrasivesstartoutsharp, buttheydull quickly.
3m ? trizact ? belts 3m ? trizact ? 237aa (cont.) upc grade w x l qty./case 051119- 10263-5 ? a6 1" x 64" 200 051125- 55143-4 ? a16 1" x 65" 051111- 66945-7 ? a100 1" x 130" 20 051115- 27112-0 ? a45 1" x 132" 200 051115- 27111-3 ? a100 051115- 27804-4 ? a100 2" x 34" 50 051111- 69673-6 ? a16 2" x 48" 25/50 051115- 27731-3 ? a30 50 051119- 09379-7 ? a45 051125- 20671-6 ? a80 051111- 69043-7 ? a100 051119- 84184-8 ? a160 051115- 27408-4 ? a65 2" x 60" 051119- 59769-1 ? a80 051125- 54544-0 ? a100 051115- 27487-9 ? a16 2" x 72" 051115- 27653-8 ? a30 051115- 27787-0 ? a65 051115- 27904-1 ? a80 051111- 69671-2 ? a100 25/50 051115- 27849-5 ? a160 50 051111- 69369-8 ? a16 2" x 107" 25/50 051111- 69680-4 ? a45 051111- 66938-9 ? a80 50 051111- 69383-4 ? a6 2" x 118" 25/50 051111- 66860-3 ? a16 50 051125- 22263-1 ? a30 051111- 66856-6 ? a6 2" x 132" 051111- 69370-4 ? a16 25/50 051115- 27658-3 ? a30 50 051111- 69028-4 a45 051111- 69036-9 ? a65 051111- 69044-4 a100 051119- 77007-0 ? a16 2" x 148" 051125- 20169-8 ? a100 051125- 22175-7 ? a65 2" x 157" 051111- 69294-3 ? a6 3" x 24" 051111- 69290-5 ? a16 051111- 69291-2 ? a30 051125- 14935-8 ? a80 051119- 83067-5 ? a16 3" x 60" 051111- 69045-1 ? a100 051119- 82467-4 ? a80 3" x 72" 051111- 69295-0 ? a160 25/50 ? made-to-order 3m ? trizact ? 237aa ? semi-flexible abrasive ? aluminum oxide mineral ? great choice for stainless steel finishes upc grade w x l qty./case 051119- 82624-1 ? a6 1" x 11" 500 051125- 32361-1 ? a16 051115- 27208-0 ? a45 051111- 66892-4 ? a65 051111- 69366-7 ? a100 051125- 22681-3 ? a100 1" x 12" 200 051111- 69377-3 ? a30 1" x 30" 051125- 15699-8 ? a16 1" x 42" 051125- 08603-5 ? a100 051111- 69676-7 ? a160 20 051119- 09095-6 ? a6 1" x 60" 200 051119- 09093-2 ? a16 051119- 10286-4 ? a45 051115- 27051-2 ? a65 ? made-to-order 407921 407921 coated abrasives 33 3m ? trizact ? 217ea ? ideal for aluminum, copper, brass and zinc alloys to final finishing ? good for low pressure application ? flexible belt for intermediate finish and dimensioning upc grade w x l min./case 051125- 23664-5 ? a45 4" x 84" 50 051125- 15686-8 ? a45 4" x 106" 051125- 20639-6 ? a6 4" x 118" 051125- 14350-9 ? a16 051111- 66834-4 ? a30 051125- 13733-1 ? a45 051125- 16987-5 ? a16 4" x 120" 051111- 66830-6 ? a6 4" x 132" 051111- 69360-5 ? a16 051111- 66835-1 ? a30 051111- 66841-2 ? a45 051111- 69669-9 ? a65 051119- 05828-4 ? a80 051125- 12699-1 ? a30 4" x 168" 051125- 12479-9 ? a80 ? made-to-order
attention: belts are available in other grades and sizes. if you need a specific belt not listed, contact your 3m sales specialist or 3m authorized distributor. 3m ? trizact ? belts (cont.) 3m ? trizact ? 237aa (cont.) upc grade w x l qty./case 051111- 69015-4 ? a16 3" x 90" 50 051111- 69021-5 ? a30 051111- 69029-1 ? a45 051111- 69047-5 ? a100 051111- 66863-4 ? a16 3" x 118" 051111- 69022-2 ? a30 051125- 19954-4 ? a6 3" x 132" 051111- 51199-2 a16 051111- 51207-4 a30 051111- 51209-8 a45 051111- 69037-6 ? a65 051111- 69051-2 ? a160 051111- 66864-1 ? a16 3" x 148" 051111- 69292-9 ? a30 051111- 69293-6 ? a45 051115- 26995-0 ? a45 3" x 157" 051115- 27921-8 ? a65 051125- 19529-4 ? a80 051115- 27798-6 ? a16 3" x 168" 25 051111- 66876-4 ? a30 50 051115- 28033-7 ? a45 051111- 69371-1 ? a16 3" x 300" 051111- 69381-0 ? a45 051111- 69385-8 ? a65 051115- 27777-1 ? a80 3" x 346" 25 051115- 27145-8 ? a65 4" x 36" 50 051111- 66949-5 ? a100 051125- 11794-4 ? a100 4" x 40" 051119- 68279-3 ? a100 4" x 48" 051115- 27859-4 ? a16 4" x 72" 051125- 10967-3 ? a65 4" x 84" 051119- 67382-1 ? a100 051115- 27749-8 ? a6 4" x 90" 051111- 69016-1 ? a16 051111- 51204-3 a30 051111- 69030-7 ? a45 051119- 73517-8 ? a65 051115- 27592-0 ? a80 051111- 69672-9 ? a100 25/50 051115- 27593-7 ? a160 50 ? made-to-order 3m ? trizact ? 237aa (cont.) upc grade w x l qty./case 051115- 27153-3 ? a30 4" x 106" 50 051115- 26818-2 ? a100 051111- 66867-2 ? a16 4" x 118" 051111- 66878-8 ? a30 051111- 66888-7 ? a45 051111- 66897-9 ? a65 051125- 17651-4 ? a100 051115- 26883-0 ? a30 4" x 124" 051111- 69251-6 ? a6 4" x 132" 25/50 051111- 69017-8 a16 50 051111- 51214-2 a30 051111- 69031-4 ? a45 051111- 69387-2 ? a65 25/50 051111- 66941-9 ? a80 051111- 69048-2 ? a100 50 051111- 69375-9 ? a160 25/50 051111- 66950-1 ? a100 4" x 146" 50 051125- 11757-9 ? a45 4" x 158" 051115- 27521-0 ? a16 4" x 168" 051119- 10264-2 ? a30 051119- 08908-0 ? a65 051111- 69681-1 ? a45 4" x 274" 051115- 27303-2 ? a160 4" x 352" 051115- 27467-1 ? a65 4" x 354" 051111- 68739-0 ? a100 25 051111- 68738-3 ? a160 50 ? made-to-order coated abrasives 34
3m ? trizact ? 307ea ? flexible cloth backing ? aluminum oxide mineral ? perfect choice for preplate surface finishes upc grade w x l min./case 051111- 67100-9 ? a80 1" x 42" 200 051111- 69408-4 ? a100 50/200 051111- 67101-6 ? a80 1" x 60" 200 051115- 27801-3 ? a16 1" x 72" 051115- 27448-0 ? a45 051125- 14659-3 ? a65 051119- 63318-4 ? a6 1" x 76" 051125- 50495-9 ? a30 051111- 67055-2 ? a6 1" x 77" 051111- 67068-2 ? a30 051115- 19520-4 ? a45 25/200 051115- 26828-1 ? a6 1" x 132" 200 051115- 27410-7 ? a16 051115- 27346-9 ? a45 051115- 27491-6 ? a80 051125- 20660-0 ? a30 2" x 17" 50 051115- 27830-3 ? a16 2" x 36" 051125- 40962-9 ? a65 2" x 48" 051119- 58606-0 ? a30 2" x 60" 051119- 75663-0 ? a45 051125- 46217-4 ? a65 051125- 11024-2 a6 2" x 72" 051111- 69061-1 a16 051111- 69067-3 a30 051111- 69072-7 ? a45 051111- 69074-1 ? a65 051111- 69079-6 a100 051125- 34816-4 a30 2" x 76" 051111- 61067-1 ? a6 2" x 83" 200 051111- 61066-4 a16 051115- 27125-0 ? 2" x 90" 50 051125- 47160-2 ? a65 2" x 96" 051111- 68818-2 ? a6 2" x 118" 051119- 09343-8 ? a16 051125- 20950-2 ? a30 051125- 20345-6 ? a45 ? made-to-order 3m ? trizact ? belts (cont.) 407921 3m ? trizact ? 253fa ? ideal for wet flat-finishing and wet intermediate finishing of centerless applications ? great on stainless steel, carbon steel and carbon fibre composites upc grade w x l min./case 051135- 13635-5 a6 belt sizes made to order. specify upc, grade and belt size (w" x l"). belts wider than 25" require multiple splices. determined by belt size. 051135- 13636-2 a16 051135- 13637-9 a30 051135- 13638-6 a45 051135- 13639-3 a65 051135- 13640-9 a80 051135- 13641-6 a100 coated abrasives 35
3m ? trizact ? belts (cont.) attention: belts are available in other grades and sizes. if you need a specific belt not listed, contact your 3m sales specialist or 3m authorized distributor. 3m ? trizact ? 327dc ? use for mill line removal, intermediate scratch refinement, consistent dimensioning and consistent finishing applications ? macroreplicated aluminum oxide on a flexible backing ? grinding aid ? for dry use only upc grade w x l min./case 051135- 94693-0 a30 belt sizes made to order. specify upc, grade and belt size (w" x l"). belts wider than 25" require multiple splices. determined by belt size. 051135- 94692-3 a45 051135- 94691-6 a65 051135- 94690-9 a100 051135- 29683-7 a160 051135- 94689-3 a300 3m ? trizact ? 307ea (cont.) upc grade w x l min./case 051111- 51206-7 a6 2" x 132" 25/50 051111- 51202-9 a16 051111- 69068-0 a30 50 051111- 51210-4 a45 051111- 69075-8 a65 051111- 69077-2 a80 051111- 69080-2 a100 051111- 69409-1 ? a16 2" x 138" 051111- 67059-0 ? a6 2" x 148" 50 051115- 19517-4 ? a16 25/50 051111- 69069-7 ? a30 50 051125- 20168-1 ? a45 051111- 67091-0 ? a65 051111- 67064-4 ? a16 3" x 60" 051115- 27893-8 ? 3" x 72" 051125- 38992-1 ? a30 051125- 30837-3 ? a100 051111- 69410-7 ? a16 3" x 90" 25/50 051125- 49713-8 ? a65 50 051111- 67077-4 ? a30 3" x 96" 051111- 69256-1 ? a65 051111- 68819-9 ? a6 3" x 118" 051111- 69063-5 ? a16 051111- 51203-6 a30 051111- 67084-2 ? a45 051111- 67106-1 ? a80 051111- 67111-5 ? a100 051115- 27418-3 ? a16 3" x 120" 051125- 20567-2 ? a30 051125- 30879-3 ? a45 051111- 69059-8 ? a6 3" x 132" 50 051125- 13220-6 ? a16 full fex 051111- 51200-5 a16 25/50 051111- 51201-2 a30 051125- 16874-8 ? a30 full flex 50 051111- 69073-4 a45 051111- 69076-5 ? a65 051111- 69078-9 a80 051111- 69082-6 ? a100 051111- 67065-1 ? a16 3" x 148" 50 051115- 27594-4 ? a6 3" x 168" 051115- 19518-1 ? a16 25/50 051111- 67087-3 ? a45 50 ? made-to-order 3m ? trizact ? 307ea (cont.) upc grade w x l min./case 051115- 27604-0 ? a30 4" x 36" 50 051111- 69060-4 ? a6 4" x 90" 051111- 69064-2 ? a16 051115- 19522-8 ? a65 25/50 051125- 22401-7 ? a6 4" x 118" 50 051111- 69065-9 a16 051111- 69070-3 ? a30 051111- 67107-8 ? a80 051111- 67112-2 ? a100 051115- 27766-5 ? a6 4" x 132" 051111- 69066-6 ? a16 051111- 69071-0 a30 051111- 51212-8 a45 051115- 26922-6 ? a80 051119- 73781-3 ? a100 051111- 68821-2 ? a30 4" x 168" 051115- 26997-4 ? a16 4" x 240" 25 051111- 67113-9 ? a100 50 ? made-to-order coated abrasives 36
3m ? trizact ? 347fc ? 3m ? ceramic abrasive grain on a marcoreplicated, flexible x wt. backing ? for high-pressure applications on hard metals, nickel alloys, titanium and stainless steel upc grade w x l min./case 051125- 64275-0 a30 belt sizes made to order. specify upc, grade and belt size (w" x l"). belts wider than 25" require multiple splices. determined by belt size. 051125- 64274-3 a45 051125- 64273-6 a65 051125- 64272-9 a100 051125- 64271-2 a160 051125- 64270-5 a300 3m ? trizact ? belts (cont.) 3m ? trizact ? 407ea ? use for mill line removal, intermediate scratch refinement, consistent dimensioning and consistent finishing applications ? silicon carbide constructed on a flexible rayon cloth backing ? grinding aid for cooler grinding ? resin bonded for heat resistance upc grade w x l min./case 051135- 91841-8 a20 belt sizes made to order. specify upc, grade and belt size (w" x l"). belts wider than 25" require multiple splices. determined by belt size. 051144- 99004-7 a60 051144- 99005-4 a90 051135- 90527-2 a110 3m ? trizact ? cloth belts 363fc ? centerless/cylindrical/flat part grinding and finishing ? macroreplicated aluminum oxide on a durable yf wt. cloth backing ? use wet on zirconium, titanium, carbon steel, stainless steel and other alloys ? long belt life improves productivity ? reduce or eliminate belt break-in ? consistent cut rate and finish from heavy deburring and defect removal to intermediate finishing upc grade common sizes w x l min./case 051135- 98214-3 a30 belt sizes made to order. specify upc, grade and belt size (w" x l"). belts wider than 25" require multiple splices. determined by belt size. 051135- 98213-6 a45 051135- 98212-9 a65 051135- 98211-2 a100 051135- 98210-5 a160 051135- 98209-9 a300 3m ? trizact ? cf 337dc ? macroreplicated structure provides long product life and consistent cut and finish upc grade w x l qty./case backstand 051141- 20646-2 ? a300 1" x 132" 100 048011- 33156-0 a45 2" x 60" 5 048011- 33155-3 a65 048011- 33154-6 ? a100 048011- 33153-9 ? a160 048011- 33152-2 ? a300 048011- 33161-4 ? a45 2" x 72" 048011- 33160-7 ? a65 048011- 33159-1 ? a100 048011- 33158-4 ? a160 048011- 33157-7 ? a300 048011- 33166-9 ? a45 2" x 132" 048011- 33165-2 ? a65 048011- 33164-5 ? a100 048011- 33163-8 ? a160 048011- 33162-1 ? a300 048011- 33171-3 ? a45 3" x 132" 048011- 33170-6 ? a65 048011- 33169-0 ? a100 048011- 33168-3 ? a160 048011- 33167-6 ? a300 ? made-to-order 311760 407921 coated abrasives 37
3m ? trizact ? belts 953fa ? use in wet centerless or flat grinding and finishing operations ? process flexible belt that delivers consistent, predictable results ? macroreplicated ceramic abrasive grain coated on waterproof cloth backing upc grade w x l qty./case 051135- 29383-6 a6 belt sizes made to order. specify upc, grade and belt size (w" x l"). belts wider than 25" require multiple splices. determined by belt size. 051135- 29507-6 a10 051135- 29382-9 a16 051135- 29381-2 a30 051135- 29380-5 a45 051135- 29379-9 a65 051135- 29378-2 a80 051135- 29377-5 a100 051135- 29375-1 a160 051135- 29373-7 a300 3m ? trizact ? belts (cont.) attention: belts are available in other grades and sizes. if you need a specific belt not listed, contact your 3m sales specialist or 3m authorized distributor. 3m ? trizact ? cloth belts 463fc ? wet centerless/flat part/ finishing/polishing ? macroreplicated silicon carbide on a durable yf wt. cloth backing ? use wet on zirconium, titanium, carbon steel, stainless steel and other alloys ? long belt life improves productivity ? reduce or eliminate belt break-in ? consistent finer grade ranges for fine finishes on all metals. upc grade w x l min./case 051135- 98191-7 a6 belt sizes made to order. specify upc, grade and belt size (w" x l"). belts wider than 25" require multiple splices. determined by belt size. 051135- 97955-6 a10 051135- 97954-9 a20 051135- 98047-7 a30 051135- 97953-2 a45 coated abrasives 38
see pages 72C77 for available accessories. 3m ? utility cloth sheet and roll selection guide product id mineral backing features blending finishing cleaning good 011k aluminumoxide flexible utilitycloth closed coat;generalpurposeuse better 211k aluminumoxide flexible utilitycloth useforallgeneralmaintenancework best 314d premium aluminumoxide durablecloth strongbondingsystemforshellingresistance 3m ? utility cloth sheets 011k ? aluminum oxide mineral ? general purpose use upc grade w x l min./case sheets 051144- 02433-9 crs 9" x 11" 50/250 051144- 02432-2 med 051144- 02431-5 fine 209216 3m ? utility cloth sheets and rolls 211k ? aluminum oxide on a j wt. cloth backing ? use these flexible utility rolls and sheets for general applications such as deburring, rust removal, strapping and all general maintenance work upc grade w x l min./case sheets 051144- 02410-0 80 9" x 11" 50/250 051144- 02409-4 100 051144- 02408-7 120 051144- 02407-0 150 051144- 02406-3 180 051144- 02405-6 220 051144- 02404-9 240 051144- 02402-5 320 051144- 12501-2 400 051144- 12500-5 500 3m ? utility cloth sheets and rolls 211k (cont.) upc grade w x l min./case utility rolls 051144- 05010-9 80 1" x 50 yds. 1/5 051144- 05009-3 100 051144- 05008-6 120 051144- 05007-9 150 051144- 05006-2 180 051144- 05005-5 220 051144- 05004-8 240 051144- 05003-1 280 051144- 05002-4 320 051144- 05001-7 400 051144- 05000-0 500 051144- 05030-7 80 1-1/2" x 50 yds. 051144- 05029-1 100 051144- 05028-4 120 051144- 05027-7 150 051144- 05026-0 180 051144- 05025-3 220 051144- 05024-6 240 051144- 05022-2 320 051144- 05021-5 400 051144- 05020-8 500 051144- 05050-5 80 2" x 50 yds. 051144- 05049-9 100 051144- 05048-2 120 051144- 05047-5 150 051144- 05046-8 180 051144- 05045-1 220 051144- 05044-4 240 051144- 05042-0 320 051144- 05041-3 400 051144- 05040-6 500 coated abrasives 39 utility cloth sheets and rolls a good choice for all your utility sanding and general maintenance work. can be torn and rolled without shelling.
3m ? utility cloth sheets and rolls 314d ? aluminum oxide on x and j wt. cloth backings ? ideal for all utility jobs ? can be torn into strips and rolled without shelling upc grade backing w x l min./case sheets 051115- 19775-8 p40 x wt. 9" x 11" 50/250 051115- 19774-1 p50 051115- 19773-4 p60 051115- 19772-7 p80 j wt. 051115- 19771-0 p100 051115- 19770-3 p120 051115- 19769-7 p150 051115- 19768-0 p180 051115- 19767-3 p220 051115- 19766-6 p240 051115- 19765-9 p280 051115- 19764-2 p320 051115- 19763-5 p400 utility rolls 051115- 19794-9 p50 x wt. 1" x 50 yds. 1/5 051115- 19793-2 p60 051115- 19792-5 p80 j wt. 051115- 19791-8 p100 051115- 19790-1 p120 051115- 19789-5 p150 051115- 19788-8 p180 051115- 19787-1 p220 051115- 19786-4 p240 051115- 19785-7 p280 051115- 19784-0 p320 051115- 19783-3 p400 see pages 72C77 for available accessories. utility cloth sheets and rolls (cont.) 380124 3m ? utility cloth sheets and rolls 314d (cont.) upc grade backing w x l min./case utility rolls 051115- 19813-7 p50 x wt. 1-1/2" x 50 yds. 1/5 051115- 19812-0 p60 051115- 19811-3 p80 j wt. 051115- 19810-6 p100 051115- 19809-0 p120 051115- 19808-3 p150 051115- 19807-6 p180 051115- 19806-9 p220 051115- 19805-2 p240 051115- 19804-5 p280 051115- 19803-8 p320 051115- 19802-1 p400 051115- 19826-7 p40 x wt. 2" x 50 yds. 051115- 19825-0 p50 051115- 19824-3 p60 051115- 19823-6 p80 j wt. 051115- 19822-9 p100 051115- 19821-2 p120 051115- 19820-5 p150 051115- 19819-9 p180 051115- 19818-2 p220 051115- 19817-5 p240 051115- 19816-8 p280 051115- 19815-1 p320 051115- 19814-4 p400 coated abrasives 40
see pages 72C77 for available accessories. coated abrasives 41 3m ? paper sheets 336u ? aluminum oxide on a c wt. paper backing ? medium-weight sheets for general-purpose sanding ? open coat resists loading on soft materials upc grade w x l min./case 051144- 02114-7 100 9" x 11" 100/1000 051144- 02113-0 120 051144- 02112-3 150 209205 3m ? paper sheets 210n ? aluminum oxide on an a wt. paper backing ? open coat ? provides exceptional conformability for contour sanding upc grade w x l min./case 051144- 02104-8 180 9" x 11" 100/1000 051144- 02103-1 220 3m ? paper sheets 346u ? aluminum oxide on a d wt. paper backing ? ideal for hand or machine sanding of many different materials, including woods, metals, paints, plastics and fiberglass upc (051144-) grade w x l min./case 051144- 02119-2 36 9" x 11" 50/250 051144- 02118-5 40 051144- 02117-8 50 50/500 051144- 02116-1 60 051144- 02115-4 80 209207 3m ? wetordry ? paper sheets 431q ? silicon carbide on a c wt. paper backing ? reduced clogging eliminates dust when used wet ? heavyweight paper backing for increased durability upc grade w x l min./case 051144- 02018-8 80 9" x 11" 50/250 051144- 02017-1 100 051144- 02016-4 120 051144- 02015-7 150 051144- 02014-0 180 199309 3m ? wetordry ? sheets 413q ? silicon carbide on an a wt. paper backing ? reduced clogging eliminates dust when used wet ? excellent conformability upc grade w x l min./case 051144- 02007-2 220 9" x 11" 50/500 051144- 02006-5 240 50/250 051144- 02005-8 280 051144- 02004-1 320 50/500 051144- 02003-4 360 50/250 051144- 02002-7 400 50/500 209204 3m ? wetordry ? sheet selection guide product id mineral backing blending finishing 431q silicon carbide c wt. paper 413q a wt. paper 3m ? paper sheet selection guide product id mineral backing blending finishing good 210n aluminum oxide a wt. paper better 336u aluminum oxide c wt. paper best 346u aluminum oxide d wt. paper 3m ? wetordry ? sheets still a favorite for their reduced clogging, long life and great finish. good general use sheet for hand or machine sanding. can be run wet or dry. 3m ? paper sheets conformable and versatile, 3m ? paper sheets are ideal for hand or machine sanding. various constructions available for use on wood, metal, paint, plastic and fiberglass.
see pages 72C77 for available accessories. coated abrasives 42 3m ? flap wheels coated abrasive flap wheels are the ideal choice for light grinding, blending, graining and scale removal on a variety of metals. the abrasive flaps offer a long lasting supply of fresh abrasives and a load resistant design. available in both flange mounted and spindle mounted constructions with general purpose aluminum oxide or high performing 3m ? ceramic aluminum oxide blend abrasive grain. 3m ? flange mounted flap wheels 3m ? flap wheels 241e/244e ? aluminum oxide on a flexible xe wt. cloth backing ? long life and fast cut ? general purpose flap wheels at a value price upc grade max. rpm dia. x w x ah qty./case 051144- 35113-8 60 6,100 6" x 1" x 1" 5 051144- 35112-1 80 051144- 35111-4 100 051144- 35109-1 120 051144- 35088-9 60 5,200 6" x 2" x 1" 051144- 35086-5 80 additional sizes are available. 51742 3m ? flap wheels 741a ? 3m ? ceramic aluminum oxide blend abrasive grain on a durable x wt. cloth backing ? longer life and faster cut upc grade max. rpm dia. x w x ah qty./case 051144- 82770-1 50 6,100 6" x 1" x 1" 5 051144- 81986-7 60 051144- 81984-3 80 additional sizes are available. 51742 3m ? flange mounted flap wheel selection guide material product id mineral grade better carbon steel 241e aluminumoxide 50C320 244e aluminumoxide 60C120 best stainless steel 741a ceramicaluminumoxideblend 50C120 diameter arbor hole >3"C4-1/2" 5/8" >4-1/2"C6" 1" >6"C8" 1"or1-1/4" >8"C10" 1-3/4"or2" 3m ? flap wheels 241e/244e and 741a can be made-to-order in the following sizes:
see pages 72C77 for available accessories. coated abrasives 43 material product id mineral grade better carbon steel 244d aluminumoxide 60C120 best stainless steel 747d ceramicaluminumoxideblend 36C150 3m ? spindle mounted flap wheel selection guide 3m ? flap wheels 747d t83 and t84 ? 3m ? ceramic aluminum oxide blend abrasive grain on a resin-bonded x wt. cloth backing ? includes a grinding aid for cooler running on stainless steel upc grade max. rpm dia. x w x shk qty./case t83; 1/4" straight 051144- 80761-1 60 30,000 1" x 1" x 1/4" 10 051144- 80757-4 80 051144- 80753-6 p120 051144- 80763-5 60 25,000 2" x 1" x 1/4" 051144- 80759-8 80 051144- 80755-0 p120 051144- 80650-8 60 20,000 3" x 1" x 1/4" 051144- 80651-5 80 051144- 80652-2 p120 t84; 1/4C20 threaded 051144- 83271-2 60 25,000 2" x 1" x 1/4C 20 ext 10 051144- 83268-2 80 051144- 83265-1 p120 051144- 83269-9 60 20,000 3" x 1" x 1/4C 20 ext 051144- 83267-5 80 051144- 83263-7 p120 3m ? flap wheels 244d t83 and t84 ? aluminum oxide ? general purpose flap wheel delivers consistent finish and uniform cut upc grade max. rpm dia. x w x shk qty./case t83; 1/4" straight 051144- 35475-7 60 30,000 1" x 1" x 1/4" 10 051144- 35476-4 80 051144- 35477-1 120 051144- 14623-9 60 25,000 2" x 1" x 1/4" 051144- 14624-6 80 051144- 14625-3 120 051144- 14655-0 60 20,000 3" x 1" x 1/4" 051144- 14656-7 80 051144- 14657-4 120 t84; 1/4C20 threaded 051144- 35467-2 60 30,000 1" x 1" x 1/4C 20 ext 10 051144- 35468-9 80 051144- 35469-6 120 051144- 14575-1 60 25,000 2" x 1" x 1/4C 20 ext 051144- 14576-8 80 051144- 14607-9 60 20,000 3" x 1" x 1/4C 20 ext 051144- 14608-6 80 3m ? spindle mounted flap wheels t84 1/4" x 20 threaded t83 1/4" straight 524290
see pages 72C77 for available accessories. 3m ? cartridge rolls 747d ? 3m ? ceramic aluminum oxide blend abrasive grain on an x wt. cloth backing ? long life and fast cut ? contains grinding aid for cooler cutting on heat sensitive alloys upc grade max. rpm dia. x l x ch qty./case regular 051144- 80790-1 60 24,000 1/2" x 1-1/2" x 1/8" 100 051144- 80796-3 80 051144- 80792-5 p120 full taper 051144- 80786-4 60 24,000 1/2" x 1-1/2" x 1/8" 100 051144- 80787-1 80 051144- 80788-8 p120 14378 coated abrasives 44 3m ? cartridge rolls 341d ? aluminum oxide on an x wt. cloth backing ? long life and fast cut ? general purpose cartridge rolls at a value price upc grade max. rpm dia. x l x ch qty./case regular 051144- 96959-3 p60 24,000 1/4" x 1" x 1/8" 100 051144- 14021-3 p80 051144- 96961-6 p120 051144- 96963-0 p180 051144- 96968-5 p60 1/4" x 1-1/2" x 1/8" 051144- 96969-2 p80 051144- 96971-5 p120 051144- 96973-9 p180 051144- 14024-4 p60 3/8" x 1" x 1/8" 051144- 14023-7 p80 051144- 14022-0 p120 051144- 97008-7 p180 051144- 97013-1 p60 3/8" x 1-1/2" x 1/8" 051144- 20417-8 p80 051144- 97015-5 p120 051144- 97017-9 p180 051144- 97041-4 p60 1/2" x 1" x 1/8" 051144- 97042-1 p80 051144- 97044-5 p120 051144- 14028-2 p60 1/2" x 1-1/2" x 1/8" 051144- 14027-5 p80 051144- 14026-8 p120 051144- 97059-9 p180 051144- 97162-6 p60 16,000 3/4" x 1-1/2" x 3/16" 051144- 97163-3 p80 051144- 97165-7 p120 51754 3m ? cartridge rolls cartridge rolls are ideal for getting into small, hard to reach spaces. as they wear, the wrapped layers of the cartridge roll continuously expose fresh abrasive layers for continued cutting action. available in regular and tapered construction. 3m ? cartridge rolls 341d (cont.) upc grade max. rpm dia. x l x ch qty./case full taper 051144- 97239-5 p60 24,000 3/8" x 1" x 1/8" 100 051144- 97240-1 p80 051144- 97242-5 p120 051144- 97244-9 p180 051144- 97248-7 p60 3/8" x 1-1/2" x 1/8" 051144- 97249-4 p80 051144- 97251-7 p120 051144- 97257-9 p60 1/2" x 1" x 1/8" 051144- 97259-3 p120 051144- 14034-3 p60 1/2" x 1-1/2" x 1/8" 051144- 14033-6 p80 051144- 14032-9 p120 051144- 97267-8 p180
3m ? square pads 747d ? 3m ? ceramic aluminum oxide blend abrasive grain on an x wt. cloth backing ? super aggressive cut rate and durability ? contains grinding aid for cooler cutting on heat sensitive alloys upc grade max rpm size qty./case 1/4"C 20 eyelet 051141- 27359-4 ? 60 12,000 2" x 2" x 1/2" 100 051141- 27360-0 ? 80 051141- 27361-7 ? p120 051141- 27362-4 ? 60 2" x 2" x 3/8" 051141- 27363-1 ? 80 051141- 27364-8 ? p120 051141- 27365-5 ? 60 9,000 3" x 3" x 1/2" 051141- 27366-2 ? 80 051141- 27367-9 ? p120 ? made-to-order 3m ? square pads 341d ? premium aluminum oxide on an x wt. cloth backing ? long life and fast cut ? general purpose square pads at a value price upc grade max rpm size min./case 1/4"C 20 eyelet 051141- 27353-2 ? 60 12,000 2" x 2" x 3/8" 50/100 051141- 27354-9 ? 80 051141- 27355-6 ? p120 051141- 27350-1 60 2" x 2" x 1/2" 051141- 27351-8 80 051141- 27352-5 p120 051144- 97723-9 9,000 3" x 3" x 1/4" 051141- 27356-3 ? 60 3" x 3" x 1/2" 051141- 27357-0 ? 80 051141- 27358-7 ? p120 ? made-to-order see pages 72C77 for available accessories. 3m ? square and cross pads square pads are ideal for fast grinding/blending of channels, fillets, and corners, plus spotting on flat surfaces. as the square pads rotate, the corners exert a fast biting action and gradually wear down to expose fresh abrasive material. cross pads are used for close tolerance polishing of small radii and channels, deburring the ends and insides of tubing, and other special applications. coated abrasives 45 3m ? cross pads 341d ? premium aluminum oxide on an x wt. cloth backing ? long life and fast cut ? general purpose square pads at a value price upc grade max rpm size min./ case 8 or 10 ply; 8"C 32 eyelet 051141- 27368-6 60 24,000 1" x 1" x 3/8" 50/100 051141- 27369-3 80 051141- 27370-9 ? p120 051141- 27371-6 60 1-1/2" x 1-1/2" x 1/2" 051141- 27372-3 80 051141- 27373-0 p120 10 ply; 8"C 32 eyelet 051141- 27374-7 60 18,000 2" x 2" x 1/2" 051141- 27375-4 80 051141- 27376-1 p120 051141- 27377-8 60 2" x 2" x 3/4" 051141- 27378-5 80 051141- 27379-2 p120 051144- 97750-5 60 2-1/2" x 2-1/2" x 3/4" 8 or 10 ply; 1/4"C 20 eyelet 051141- 27380-8 60 18,000 3" x 3" x 1" 051141- 27381-5 80 051141- 27382-2 ? p120 051144- 97760-4 60 3" x 3" x 1-1/2" 051144- 97766-6 80 15,000 3-1/2" x 3-1/2" x 1-1/2" 051144- 97768-0 60 12,000 4" x 4" x 1" 051144- 98880-2 10,000 5" x 5" x 1-1/2" 051144- 97783-3 9,000 6" x 6" x 1-1/2" ? made-to-order 3m ? cross pads 747d ? 3m ? ceramic aluminum oxide blend abrasive grain on an x wt. cloth backing ? super aggressive cut rate and durability ? contains grinding aid for cooler cutting on heat sensitive alloys upc grade max rpm size qty./ case 8 ply; 1/4"C 20 eyelet 051141- 20368-3 60 24,000 1-1/2" x 1-1/2" x 1/2" 100 051141- 20369-0 80 051141- 20372-0 p100 051141- 20379-9 p120 051141- 20380-5 60 18,000 2" x 2" x 1/2" 051141- 20367-6 p100 051141- 20375-1 80 2" x 2" x 3/4" ? made-to-order
3m ? bands 341d ? aluminum oxide on and x wt. cloth backing ? fast cut and long life ? general purpose evenrun bands at a value price upc grade max. rpm dia. x w qty./case 051144- 40243-4 p80 23,000 1/4" x 1/2" 100 051144- 97428-3 p120 051144- 27446-7 p36 30,000 1/2" x 1/2" 051144- 40228-1 p60 051144- 40227-4 p80 051144- 40252-6 p120 051144- 97458-0 p36 15,000 1/2" x 1" 051144- 40225-0 p60 051144- 40224-3 p80 051144- 11973-8 p120 051144- 11976-9 p36 17,000 3/4" x 1" 051144- 40221-2 p60 051144- 40220-5 p80 051144- 40219-9 p120 051144- 11977-6 p36 10,000 3/4" x 1-1/2" 051144- 40241-0 p80 051144- 40214-4 p36 18,000 1" x 1" 051144- 40211-3 p60 051144- 40210-6 p80 051144- 40208-3 p120 051144- 40207-6 p36 10,000 1" x 1-1/2" 051144- 11980-6 p60 051144- 40205-2 p80 051144- 40203-8 p36 14,000 1-1/2" x 1" 051144- 40202-1 p60 051144- 40200-7 p36 10,000 1-1/2" x 1-1/2" 051144- 40197-0 p60 051144- 40196-3 p80 051144- 40274-8 p120 14426 see pages 72C77 for available accessories. coated abrasives 46 51756 14426 3m ? bands 747d ? 3m ? ceramic aluminum oxide blend abrasive grain on an x wt. cloth backing ? long life and fast cut ? contains grinding aid for cooler cutting on heat sensitive alloys upc grade max. rpm dia. x w qty./case 051144- 80765-9 50 15,000 1/2" x 1" 100 051144- 80769-7 60 051144- 80773-4 80 051144- 80766-6 50 18,000 1" x 1" 051144- 80770-3 60 051144- 80774-1 80 051144- 80782-6 p120 051144- 80771-0 60 11,000 2" x 1" 051144- 80775-8 80 051144- 80783-3 p120 3m ? bands 341d (cont.) upc grade max. rpm dia. x w qty./case 051144- 40267-0 p60 8,000 1-1/2" x 2" 051144- 40192-5 p60 11,000 2" x 1" 051144- 40187-1 p36 6,000 2" x 2" 051144- 40184-0 p60 051144- 40183-3 p80 051144- 40178-9 p36 3,000 3" x 3" 50 051144- 40175-8 p60 051144- 40174-1 p80 051144- 40172-7 p120 3m ? bands great for getting at those hard to reach places and contours. ideal for removing parting lines, imperfections and burrs. use with 3m ? die grinders and 3m ? rubber slotted expander wheel or 3m ? rubber cushion polishing wheel.
surface conditioning abrasives 47 see pages 72C77 for available accessories. scotch-brite ? discs make tough jobs easier. scotch-brite ? discs can help you achieve a burr-free, paintable finish in fewer steps without damaging the base material. the non-woven, open web, durable construction is designed to resist loading and greatly increase the life of the disc. as a result, you will not have to change it as often. however, when you do change your disc, the roloc ? attachment or hook-and-loop attachment makes it fast and easy. scotch-brite ? disc selection guide light grinding blending deburring finishing cleaning coating removal increased loading resistance sc, pd sc, pd sc pd, hs, c&f bristle, hs, c&f bristle, hs starting point sl sl se sc pd c&s increased wear resistance lgb lgb lgb sl sc c&s xt legend pd pd surface conditioning discs se se surface conditioning discs c&f clean and finish discs lgb light grinding and blending discs sl sl surface conditioning discs c&s clean and strip discs sc sc surface conditioning discs hs high strength discs c&s xt clean and strip xt discs scotch-brite ? disc attachment guide attachments pd surface conditioning discs roloc ? tr hook-and-loop sc surface conditioning discs roloc ? tr roloc ? tp roloc ? tsm hook-and-loop se surface conditioning discs roloc ? tr hook-and-loop sl surface conditioning discs roloc ? tr hook-and-loop tn quick change light grinding & blending discs roloc ? tr hook-and-loop tn quick change bristle discs tn quick change clean & finish discs hookit ? clean & strip discs spindle mount clean & strip xt discs tn quick change roloc ? tr high strength discs spindle mount roloc ? tp roloc ? tsm roloc ? tr, tp, ts and tsm are plastic button attachments
48 see pages 72C77 for available accessories. scotch-brite ? roloc ? sc surface conditioning discs ? scotch-brite surface conditioning non-woven web provides a burr-free decorative finish ? removes grind marks, rust and coatings ? grade: a vfn C blue; a med C maroon; a crs C brown upc grade max. rpm diameter min./case roloc tp (metal button) 048011- 13237-2 a crs 25,000 2" 50/200 048011- 13241-9 18,000 3" 25/100 048011- 13243-3 ? a vfn roloc tr (plastic button) 048011- 15393-3 a crs 30,000 1" 200 048011- 15392-6 a med 048011- 15391-9 a vfn 048011- 15568-5 ? a sfn 048011- 08764-1 a crs 1-1/2" 50/200 048011- 08765-8 a med 048011- 08766-5 a vfn 048011- 08767-2 ? a sfn 048011- 05528-2 a crs 25,000 2" 048011- 05527-5 a med 048011- 05522-0 a sfn 048011- 05523-7 a vfn 048011- 05532-9 a crs 18,000 3" 25/100 048011- 05531-2 a med 048011- 05529-9 a sfn 048011- 05530-5 a vfn 048011- 12954-9 a crs 12,000 4" 048011- 12953-2 a med 048011- 12951-8 ? a sfn 100 048011- 12952-5 a vfn 25/100 roloc tsm (metal button) 048011- 13249-5 ? a crs 30,000 1-1/2" 50/200 048011- 25775-4 048011- 25774-7 ? a med 048011- 25773-0 ? a vfn 048011- 25765-5 a crs 25,000 2" 048011- 25764-8 a med 048011- 25770-9 a vfn 048011- 25767-9 a crs 18,000 3" 25/100 048011- 13257-0 048011- 25766-2 a med 048011- 13258-7 048011- 25780-8 a vfn 048011- 13259-4 048011- 13260-0 ? a sfn ? made-to-order scotch-brite ? roloc ? discs 159116 compare performance options for scotch-brite ? surface conditioning discs durability cut rate pd lgb sc se sl scotch-brite ? roloc ? se surface conditioning discs ? this coarse, tough, aggressive non-woven disc is ideal for heavy-duty deburring and finishing upc grade max. rpm diameter min./case roloc tr (plastic button) 048011- 18081-6 a crs 25,000 2" 50/200 048011- 18471-5 a med 048011- 30005-4 a fin 048011- 18082-3 a crs 18,000 3" 25/100 048011- 18472-2 a med 048011- 93453-2 a fin scotch-brite ? roloc ? sl surface conditioning discs ? cuts fast without sacrificing finish ? can last up to twice as long as other surface conditioning discs ? delivers outstanding value and productivity improvement upc grade max. rpm diameter min./case roloc tr (plastic button) 048011- 33797-5 a crs sd 25,000 2" 200 048011- 33795-1 a crs hd 048011- 33793-7 a crs 50/200 048011- 33791-3 a med 048011- 33796-8 a crs sd 18,000 3" 100 048011- 33794-4 a crs hd 048011- 33792-0 a crs 048011- 33790-6 a med many other sizes available upon request. 525694 473201 surface conditioning abrasives
49 see pages 72C77 for available accessories. scotch-brite ? roloc ? discs (cont.) scotch-brite ? roloc ? clean and strip discs ? aggressively removes paint, rust and seam sealers ? open web construction for cool running and resistance to loading and smearing ? faster cutting than wire brushes and wheels to increase production upc grade max. rpm size qty./case 048011- 14784-0 s xcs 8,000 4" x 1" 10 048011- 14780-2 4" x 1" x 1/4" scotch-brite ? roloc ? pd surface conditioning discs ? lofty, open non-woven abrasive disc ? resistant to loading on soft metals and oily surfaces upc grade max. rpm diameter min./case roloc tr (plastic button) 048011- 60191-5 ? a crs 25,000 2" 50/200 048011- 24287-3 a med 048011- 60192-2 a crs 18,000 3" 25/100 048011- 24295-8 a med ? made-to-order threaded shaft 3m ? roloc ? disc pad 3m ? roloc ? disc or wheel 12873 524494 scotch-brite ? roloc ? light grinding and blending discs ? 3 m ? ceramic aluminum oxide blend abrasive grain ? resists edge wear ? great for light grinding, deburring and blending on all metals upc grade max. rpm diameter qty./case roloc tr (plastic button) 048011- 60355-1 a crs sd 25,000 2" 50/200 048011- 60354-4 a crs hd 048011- 60357-5 a crs sd 18,000 3" 25/100 048011- 60356-8 a crs hd 048011- 60359-9 a crs sd 12,000 4" 048011- 60358-2 a crs hd roloc tsm (metal button) 048011- 60375-9 a crs sd 25,000 2" 50/200 048011- 60374-2 a crs hd 048011- 60377-3 a crs sd 18,000 3" 100 048011- 60376-6 ? a crs hd ? made-to-order heavy duty super duty 511836 511834 surface conditioning abrasives
see pages 72C77 for available accessories. scotch-brite ? roloc ? discs (cont.) scotch-brite ? roloc ? bristle discs ? efficiently clean and strip many substances from metal surfaces without damaging the work piece ? an operator can quickly and easily achieve a quality, consistent finish with light pressure upc grade color max. rpm size min./case roloc tr (plastic button) 048011- 18698-6 50 green 30,000 1" 20/80 048011- 18706-8 80 yellow 048011- 18710-5 120 white 048011- 18730-3 50 green 25,000 2" 10/40 048011- 18732-7 80 yellow 048011- 18733-4 120 white 048011- 18734-1 50 green 15,000 3" 048011- 18736-5 80 yellow 048011- 18737-2 120 white 431922 scotch-brite ? roloc ? exl unitized wheels ? strong, efficient products for edge deburring and finishing ? used with 3m ? roloc ? or 3m ? roloc ? + holder pads on a straight shaft or right-angle tool upc grade max. rpm size qty./case roloc tr (plastic button) 048011- 17185-2 2a med 22,100 2" 60 048011- 17183-8 2s fin 048011- 17190-6 6a med 048011- 17192-0 8a med 048011- 17186-9 2a med 15,100 3" 40 048011- 17184-5 2s fin 048011- 17191-3 6a med 048011- 17193-7 8a med 179831 scotch-brite ? roloc ? coating removal discs ? extra coarse grade silicon carbide ? heavy duty, semi-open web used to clean rust and paint ? color: black upc grade max. rpm diameter qty./case 048011- 18364-0 s xcs 18,000 2" 60 048011- 18350-3 15,000 3" 40 048011- 18470-8 11,000 4" scotch-brite ? roloc ? body mans bristle disc ? contains 3m ? ceramic aluminum oxide blend abrasive grain ? removes high loading materials fast and doesnt load ? great for removing rubberized undercoating, seam sealer, rust and paint ? maintains high quality product life upc grade max. rpm diameter min./case 051131- 07540-5 36 30,000 1" 6/36 051131- 07536-8 25,000 2" 4/24 051131- 07537-5 18,000 3" 3/18 461797 scotch-brite ? roloc ? hs blend and finish ? aluminum oxide mineral ? new high strength nonwoven with superior durability and cut ? great flexibility and conformability for weld burn removal, light deburring, blending, finishing and rust removal upc grade max. rpm diameter min./case roloc tr (plastic button) 048011- 64190-4 a med 18,000 2" 200 048011- 64206-2 15,000 3" 100 roloc tsm (metal button) 048011- 64213-0 a med 18,000 2" 200 048011- 64220-8 15,000 3" 100 scotch-brite ? roloc ? clean and strip xt disc ? silicon carbide mineral ? durable, rigid, long lasting ? aggressive, open-web disc for cleaning welds, removing rust and paint upc grade max. rpm diameter min./case roloc tr (plastic button) 048011- 30147-1 s xcs 18,000 2" x nh 60 048011- 30016-0 15,000 3" x nh 40 524504 50 surface conditioning abrasives
see pages 72C77 for available accessories. scotch-brite ? discs hook-and-loop scotch-brite ? sc surface conditioning discs (hook-and-loop) ? aluminum oxide ? great general purpose surface conditioning disc ? for finishing, cleaning, and light deburring ? attach and remove easily to 3m ? hook-and-loop backup pads ? use with right angle and random orbital tools upc grade color max. rpm diameter min./case hook-and-loop 048011- 07458-0 a crs brown 23,000 2" 50/200 048011- 07459-7 a med maroon 048011- 04276-3 a vfn blue 048011- 04127-8 ? a sfn gray 048011- 04120-9 a crs brown 20,000 3" 25/100 048011- 04124-7 a med maroon 048011- 04277-0 a vfn blue 048011- 04129-2 a sfn gray 100 048011- 04128-5 048011- 07450-4 a crs brown 13,000 4" 048011- 07451-1 a med maroon 048011- 04278-7 a vfn blue 048011- 04129-2 a sfn gray 048011- 14101-5 a crs brown 4-1/2" 50 048011- 27671-7 10 048011- 27672-4 a med maroon 048011- 14100-8 50 048011- 14099-5 a vfn blue 048011- 14102-2 a sfn gray 048011- 27674-8 a crs brown 10,000 5" 10 048011- 00750-2 50 048011- 27675-5 a med maroon 10 048011- 00643-7 50 048011- 27676-2 a vfn blue 10 048011- 04303-6 50 048011- 00647-5 a sfn gray 048011- 03927-5 a crs brown 8,000 6" 048011- 03928-2 a med maroon 048011- 04304-3 a vfn blue ? made-to-order scotch-brite ? sc surface conditioning discs (hook-and-loop) (cont.) upc grade color max. rpm diameter min./case hook-and-loop 048011- 27677-9 a crs brown 6,000 7" 10 048011- 00751-9 25 048011- 27678-6 a med maroon 10 048011- 00645-1 25 048011- 27679-3 a vfn blue 10 048011- 04305-0 25 048011- 00648-2 a sfn gray 048011- 00752-6 a crs brown 8" 048011- 00670-3 a med maroon 048011- 04306-7 a vfn blue 048011- 00649-9 ? a sfn gray 048011- 13325-6 ? a crs brown 600 48" 2 048011- 13100-9 ? a med maroon 048011- 13099-6 ? a vfn blue 048011- 18385-5 ? a sfn gray ? made-to-order 134361 scotch-brite ? se surface conditioning discs (hook-and-loop) ? high cutting surface conditioning disc great for edge deburring applications upc grade max. rpm diameter min./case hook-and-loop 048011- 18021-2 a crs 13,000 4" 100 048011- 18475-3 ? a med 048011- 18079-3 a crs 4-1/2" 50 048011- 18476-0 a med 048011- 18080-9 a crs 10,000 5" 048011- 18919-2 ? a med 048011- 17866-0 a crs 6,000 7" 25 048011- 18477-7 a med 048011- 30003-0 ? a fin 048011- 17239-2 a crs 8" 048011- 93348-1 ? a crs 600 48" 2 048011- 60392-6 ? a fin ? made-to-order 51 surface conditioning abrasives
see pages 72C77 for available accessories. scotch-brite ? sl surface conditioning discs (hook-and-loop) ? aluminum oxide ? highly durable product for aggressive applications ? cuts fast without sacrificing finish and can work twice as long as other standard surface conditioning discs upc grade max. rpm diameter qty./case 048011- 33813-2 ? a crs sd 13,000 4" 100 048011- 33810-1 ? a crs hd 048011- 33807-1 ? a crs 25/100 048011- 33804-0 ? a med 100 048011- 33814-9 a crs sd 4-1/2" 50 048011- 33811-8 a crs hd 048011- 33808-8 a crs 048011- 33805-7 a med 048011- 33815-6 ? a crs sd 10,000 5" 048011- 33812-5 ? 048011- 33806-4 ? a crs hd 048011- 33809-5 ? a med 048011- 33789-0 a crs sd 6,000 7" 25 048011- 33788-3 a crs hd 048011- 33787-6 a crs 048011- 33786-9 a med ? made-to-order 3m ? disc holder (hook-and-loop) surface conditioning disc 12873 scotch-brite ? discs hook-and-loop (cont.) scotch-brite ? light grinding and blending center hole disc (hook-and-loop) ? durable, non-woven 3m ? ceramic aluminum oxide blend abrasive grain product used for light grinding applications providing burr-free finish ? for use with the 3m ? center pin backup pad or 3m ? fibre disc hubs, face plates and retainer nuts ? super duty: blue ? heavy duty: maroon upc grade max. rpm dia. x ctr. hole min./case center hole 048011- 60363-6 a crs sd 10,000 4-1/2" 50 048011- 60333-9 ? 4-1/2" x 7/8" 048011- 60332-2 ? a crs hd 048011- 60343-8 a crs sd 5" 048011- 60341-4 5" x 7/8" 048011- 60336-0 a crs hd 048011- 60346-9 a crs sd 6,000 7" 25 048011- 60344-5 a crs sd 7" x 7/8" 048011- 60347-6 a crs hd hook-and-loop 048011- 60335-3 a crs hd 10,000 4-1/2" 50 048011- 60342-1 5" 048011- 60345-2 6,000 7" 25 ? made-to-order 488110 scotch-brite ? coating removal discs (hook-and-loop) ? extra coarse grade silicon carbide ? made for right-angle tools from aggressive clean & strip web ? non-loading design ideal for removing rust and coatings ? mount on hook-and-loop disc pad holders upc grade max. rpm diameter min./case hook-and-loop 048011- 18424-1 s xcs 12,000 4-1/2" 4/20 048011- 18482-1* 40 048011- 18355-8 10,000 5" 4/20 048011- 18483-8* 40 048011- 18358-9 6,000 7" 2/10 048011- 18485-2* 20 * bulk 375428 scotch-brite ? clean and finish discs (hook-and-loop) ? flexible web for finishing, blending and polishing ? conformability allows access to hard-to-reach areas upc grade max. rpm diameter qty./case 048011- 16001-6 a vfn 5,000 5" 100 048011- 00661-1 4,000 6" 048011- 30037-5 1,900 11-1/4" 25 52 surface conditioning abrasives
scotch-brite ? light grinding and blending discs tn quick change ? 3m ? ceramic abrasive grain ? aggressive, long life, scotch-brite finish ? resistant to edge wear ? super duty: blue ? heavy duty: maroon upc grade max. rpm diameter x ah qty./case 048011- 60349-0 a crs sd 13,000 4-1/2" x 5/8C11* 50 048011- 60348-3 a crs hd 048011- 60351-3 a crs sd 12,000 5" x 5/8C11* 048011- 60350-6 a crs hd 048011- 60353-7 a crs sd 8,600 7" x 5/8C11* 25 048011- 60352-0 a crs hd * quick change tinneman nut attachment scotch-brite ? discs tn quick change scotch-brite ? discs spindle mount see pages 72C77 for available accessories. scotch-brite ? clean and strip discs ? extra coarse grade silicon carbide ? tough open web, ideal for weld cleaning and removing paint and coatings upc grade max. rpm dia. x ctr. hole qty./case use with mandrel 934 048011- 00941-4 s xcs 6,000 4" x 1/2" 25 048011- 00948-3 4,000 6" x 1/2" 15 048011- 00957-5 3,000 8" x 1/2" 51717 scotch-brite ? clean and strip xt disc, tn quick change ? extra coarse grade silicon carbide ? mounts quickly to 4-1/2" and 7" grinders ? tough open web, ideal for weld cleaning and removing paint and coatings ? use with tn quick change back up pad or fibre disc hub and face plate upc grade max. rpm dia. x thk. x ah min./ case 048011- 33194-2 s xcs 13,300 4-1/2" x 1/2" x 5/8C11* 10 048011- 33196-6 8,600 7" x 1/2" x 5/8C11* 5 * quick change tinneman nut attachment 148243 524496 scotch-brite ? high strength discs ? aluminum oxide ? very conformable discs, ideal for light deburring, cleaning and finishing upc grade max. rpm dia. x ctr. hole min./case use with mandrel 933 048011- 05629-6 ? a med 4,000 6" x 1/4" 100 048011- 27748-6 a vfn 10/40 048011- 00666-6 100 use with mandrel 934 048011- 27745-5 a med 4,000 6" x 1/2" 10/40 048011- 04188-9 100 048011- 27747-9 a vfn 10/40 048011- 00665-9 100 048011- 93477-8 ? a med 3,000 8" x 1/4" 50 048011- 00673-4 a vfn 048011- 27746-2 a med 8" x 1/2" 10/20 048011- 03992-3 50 048011- 27749-3 a vfn 10/20 048011- 00672-7 50 ? made-to-order 14463 scotch-brite ? bristle discs ? easily remove paint, stains, adhesives, weld burn, rust and other surface contaminants from large areas upc grade color max. rpm diameter x ah qty./case 048011- 33054-9 36 brown 12,000 4-1/2" x 5/8C11 int 10 048011- 24241-5 50 green 048011- 24242-2 80 yellow 048011- 24243-9 120 white 424848 53 surface conditioning abrasives
see pages 72C77 for available accessories. attention: belts are available in other grades and sizes. if you need a specific belt not listed, contact your 3m sales specialist or 3m authorized distributor. scotch-brite ? belts recommended operating speeds application recommended sfpm decorative finishing 500C3,000 sfpm deburring 5,000C6,500 sfpm cleaning and conditioning 2,000C5,000 sfpm oxide removal 4,500C6,500 sfpm maximum operating speed: 6,500 sfpm sfpm = surface feet per minute durability resistant to dulling and loading resistant to wear and sharp edges pd sc df se flexibility least flexible most flexible pd sc df se scotch-brite ? surface conditioning belt availability guide 3m id backing a crs a med a fin a vfn sfn df low stretch ? ? ? sc scrim ? ? ? ? low stretch ? ? ? ? film backed ? ? ? ? se scrim ? ? ? low stretch ? ? ? film backed ? ? pd scrim ? ? low stretch ? film backed ? scotch-brite ? surface conditioning belt selection guide blending deburring finishing cleaning stainless steel, carbon steel, titanium, nickel alloy good se sc se se better sc df sc df best df se df sc a/l, copper, brass (soft metals), non-ferrous metals good sc sc sc sc better df df df df best pd pd pd pd legend df df surface conditioning belts sc sc surface conditioning belts pd pd surface conditioning belts se se surface conditioning belts 54 surface conditioning abrasives scotch-brite ? surface conditioning belts the easiest way to a perfect finish. choose scotch-brite ? surface conditioning belts for cleaning, finishing, blending and deburring. the reinforced backing offers good flexibility whether working on a file belt or backstand. the non-woven material combined with abrasive grain is an ideal way to add a great finish or remove burrs without gouging or undercutting the work piece. trust scotch-brite belts to deliver fantastic finishes.
scotch-brite ? sc surface conditioning belts ? premium scotch-brite ? surface conditioning non-woven web ? designed for cleaning, finishing and light deburring upc grade color w x l qty./case portable, benchtop and backstand 048011- 13290-7 ? a crs brown 1/4" x 18" 20 048011- 14276-0 a med maroon 048011- 13230-3 ? a vfn blue 048011- 13132-0 a crs brown 1/4" x 24" 048011- 13131-3 a med maroon 048011- 13287-7 a vfn blue 048011- 08858-7 a crs brown 1/2" x 18" 048011- 08857-0 a med maroon 048011- 08856-3 a vfn blue 048011- 05741-5 a crs brown 1/2" x 24" 048011- 03998-5 a med maroon 048011- 04299-2 a vfn blue 048011- 13639-4 a crs brown 3/4" x 18" 048011- 15899-0 a med maroon 048011- 14543-3 a vfn blue 407921 see pages 72C77 for available accessories. scotch-brite ? sc surface conditioning belts (cont.) upc grade color w x l qty./case portable, benchtop and backstand 048011- 14278-4 a crs brown 1" x 18" 10 048011- 14398-9 ? a med maroon 048011- 17517-1 ? a vfn blue 048011- 04189-6 a med maroon 1" x 42" 048011- 04190-2 a vfn blue 048011- 08913-3 ? a med maroon 1" x 132" 5 048011- 08915-7 a med maroon 2" x 48" 10 048011- 04295-4 a vfn blue 048011- 08883-9 ? a crs brown 2" x 72" 048011- 00580-5 a med maroon 048011- 00579-9 a vfn blue 048011- 03999-2 a med maroon 2" x 132" 5 048011- 04297-8 a vfn blue 048011- 05022-5 a crs brown 2-3/4" x 15-1/2" 10 048011- 05227-4 a med maroon 048011- 05820-7 a crs brown 3" x 10-11/16" 048011- 05783-5 a med maroon 048011- 09650-6 a vfn blue 048011- 14284-5 ? a crs brown 3" x 18" 048011- 14285-2 a med maroon 048011- 14550-1 a vfn blue 048011- 08880-8 a crs brown 3" x 24" 048011- 00583-6 a med maroon 048011- 04298-5 a vfn blue 048011- 05023-2 a crs brown 3" x 132" 5 048011- 00568-3 a med maroon 048011- 04289-3 a vfn blue 048011- 05016-4 a crs brown 3-1/2" x 15-1/2" 10 048011- 05228-1 a med maroon 048011- 05643-2 a vfn blue 048011- 08882-2 ? a crs brown 4" x 24" 048011- 00585-0 ? a med maroon 048011- 05018-8 ? a crs brown 4" x 132" 5 048011- 00570-6 a med maroon 048011- 04281-7 a vfn blue 048011- 05019-5 a crs brown 6" x 48" 048011- 00590-4 a med maroon 048011- 04283-1 a vfn blue ? made-to-order scotch-brite ? surface conditioning belts (cont.) scotch-brite ? se surface conditioning belt ? coarse, tough, aggressive non-woven belt for heavy duty deburring and finishing ? reinforced backing offers good flexibility ? abrasive mineral: coarse grade aluminum oxide ? color: brown/blue upc grade w x l qty./case backstand 048011- 18495-1 a crs 1/4" x 18" 20 048011- 18496-8 ? 1/4" x 24" 048011- 18087-8 1/2" x 18" 048011- 18088-5 1/2" x 24" 048011- 19697-8 3/4" x 18" 048011- 18089-2 3-1/2" x 15-1/2" 10 ? made-to-order 591930 591391 407921 55 surface conditioning abrasives
see pages 72C77 for available accessories. attention: belts are available in other grades and sizes. if you need a specific belt not listed, contact your 3m sales specialist or 3m authorized distributor. scotch-brite ? surface conditioning belts (cont.) scotch-brite ? durable flex (df) surface conditioning belt ? durable flex belt has great edge durability ? aggressive and long lasting non-woven belt for deburring, finishing, blending and cleaning ? the reinforced low-stretch backing offers good flexibility upc grade color w x l qty./case 048011- 64472-1 a crs brown 1/4" x 18" 20 048011- 64455-4 a med maroon 048011- 64464-6 a fin green 048011- 64473-8 a crs brown 1/4" x 24" 048011- 64456-1 a med maroon 048011- 64465-3 a fin green 048011- 64474-5 a crs brown 1/2" x 12" 048011- 64457-8 a med maroon 048011- 64466-0 a fin green 048011- 64475-2 a crs brown 1/2" x 18" 048011- 64458-5 a med maroon 048011- 64467-7 a fin green 048011- 64476-9 a crs brown 1/2" x 24" 048011- 64459-2 a med maroon 048011- 64468-4 a fin green 048011- 64477-6 a crs brown 3/4" x 18" 048011- 64460-8 a med maroon 048011- 64469-1 a fin green 048011- 64489-9 a crs brown 2-3/4" x 15-1/2" 10 048011- 64482-0 a med maroon 048011- 64486-8 a crs brown 3" x 10-11/16" 048011- 64480-6 a med maroon 048011- 64488-2 a crs brown 3" x 18" 048011- 64483-7 a med maroon 048011- 64484-4 a fin green 048011- 64487-5 a crs brown 3" x 24" 048011- 64481-3 a med maroon 048011- 64485-1 a fin green 048011- 64479-0 a crs brown 3" x 132" 5 048011- 64462-2 a med maroon 048011- 64471-4 a fin green 048011- 64478-3 a crs brown 3-1/2" x 15-1/2" 10 048011- 64461-5 a med maroon 048011- 64470-7 a fin green scotch-brite ? pd surface conditioning belt ? aluminum oxide abrasive mineral ? open woven belt resistant to loading on soft and/or oily materials ? reinforced backing offers good flexibility upc grade color w x l qty./case 048011- 92126-6 a crs brown belt sizes made to order. specify upc, grade and belt size (w" x l"). belts wider than 25" require multiple splices. determined by belt size. 048011- 92125-9 048011- 92127-3 048011- 92259-1 a med maroon 517724 56 surface conditioning abrasives 681902 681917
see pages 72C77 for available accessories. attention: wheels are available in other grades and sizes. if you need a specific wheel not listed, contact your 3m sales specialist or 3m authorized distributor. convolute wheels selection guides scotch-brite ? convolute wheel performance differences can be attributed to mineral (aggressiveness) and density (hardness). the combination of these two characteristics and subtle variations determine if the wheel will cut more aggressively or will be more durable and less conformable (see below). more aggressive less aggressive harder softer legend cp cut and polish wheel ldw light deburring wheel mu multi-finishing wheel exl exl deburring wheel mf metal finishing wheel xr xr metalworking wheel * numeric designators (8/9) represent mineral aggressiveness; not density. ** xr wheel density: h = hard scotch-brite ? convolute wheel application cleaning deburring blending finishing polishing best exl deburring exl-xp deburring metal finishing cut and polish multi-finishing xr metalworking light deburring density number (prefix to mineral) mineral abbreviations (prefix to grade) aaluminum oxide mineral ssilicon carbide mineral soft hard 2 4 6 7 8 9 10 11 57 surface conditioning abrasives scotch-brite ? wheels get high performance and durability in a variety of cleaning, deburring, finishing and polishing applications. used on right angle grinders and bench tools, scotch-brite ? wheels produce great results on all types of metal, composites and glass. mu 2 3 4 mu fin med crs
see pages 72C77 for available accessories. scotch-brite ? exl, ex2 and ex3 deburring wheels (cont.) upc grade max. rpm size qty./case exl (cont.) 048011- 14791-8 8s fin 4,500 8" x 3/8" x 3" 4 048011- 17459-4 8a med 8" x 1/2" x 3" 048011- 14629-4 8s fin 048011- 05791-0 9s fin 048011- 13619-6 8a med 8" x 1" x 3" 3 048011- 18279-7 8s med 048011- 09551-6 8s fin 048011- 05135-2 9s fin 048011- 13620-2 8a med 8" x 2" x 3" 2 048011- 09552-3 8s fin 048011- 05136-9 9s fin 048011- 05137-6 9s fin 3,600 10" x 1" x 5" 048011- 15641-5 8s fin 3,000 12" x 1/2" x 5" 048011- 09005-4 9s fin 048011- 13621-9 8a med 12" x 1" x 5" 1 048011- 18281-0 8s med 048011- 09554-7 8s fin 048011- 05138-3 9s fin 048011- 13622-6 8a med 12" x 2" x 5" 048011- 09555-4 8s fin 048011- 05139-0 9s fin 048011- 13623-3 8a med 2,550 14" x 2" x 8" 048011- 05141-3 9s fin ex2 048011- 17215-6 8a med 6,000 6" x 1/2" x 1" 4 048011- 18285-8 8s med 048011- 17216-3 8s fin 048011- 24532-4 9s fin 048011- 17217-0 8a med 6" x 1" x 1" 3 048011- 18286-5 8s med 048011- 17218-7 8s fin 048011- 18040-3 9s fin 048011- 17426-6 8a med 4,500 8" x 1/2" x 3" 4 048011- 17425-9 8s fin 048011- 17219-4 8a med 8" x 1" x 3" 3 048011- 17220-0 8s fin 048011- 18365-7 9s fin 048011- 17223-1 8a med 3,000 12" x 1" x 5" 1 048011- 17224-8 8s fin ex3 048011- 24026-8 9s fin 6,000 6" x 1/2" x 1" 4 048011- 18825-6 6" x 1" x 1" 3 048011- 24527-0 4,500 8" x 1" x 3" 048011- 18826-3 3,000 12" x 2" x 5" 1 scotch-brite ? exl, ex2 and ex3 deburring wheels ? silicon carbide mineral ? use to clean, finish, blend, deburr or polish all types of metals, composites and glass upc grade max. rpm size qty./case exl 048011- 13616-5 8a med 6,000 6" x 1/2" x 1" 4 048011- 09548-6 8s fin 048011- 05790-3 9s fin 048011- 13617-2 8a med 6" x 1" x 1" 3 048011- 18278-0 8s med 048011- 09549-3 8s fin 048011- 05132-1 9s fin 048011- 13618-9 8a med 6" x 2" x 1" 2 048011- 05133-8 9s fin 14497 scotch-brite ? convolute wheels scotch-brite ? exl-xp deburring wheels ? the new long life addition to the exl family ? excellent for deburring, polishing and finishing all types of metals, composites and glass upc grade max. rpm dia. x w x ah qty./case 048011- 60442-8 9s fin 6,000 6" x 1/2" x 1" 4 048011- 60447-3 10s fin 048011- 60452-7 11s fin 048011- 60306-3 9s fin 6" x 1" x 1" 3 048011- 60310-0 10s fin 048011- 60315-5 11s fin 048011- 60443-5 9s fin 4,500 8" x 1/2" x 3" 4 048011- 60448-0 10s fin 048011- 60453-4 11s fin 048011- 60307-0 9s fin 8" x 1" x 3" 3 048011- 60311-7 10s fin 048011- 60316-2 11s fin 048011- 60444-2 9s fin 8" x 2" x 3" 2 048011- 60449-7 10s fin 048011- 60454-1 11s fin 048011- 60445-9 9s fin 3,000 12" x 1/2" x 5" 048011- 60317-9 10s fin 048011- 60450-3 11s fin 048011- 60308-7 9s fin 12" x 1" x 5" 1 048011- 60312-4 10s fin 048011- 60317-9 11s fin 048011- 60446-6 9s fin 12" x 2" x 5" 048011- 60451-0 10s fin 048011- 60455-8 11s fin 528678 58 surface conditioning abrasives
scotch-brite ? light deburring wheel ? designed to provide a clean and economical system for removing fine burrs, yet resulting in a highly polished finish ? ideal for fine deburring, polishing and finishing because of its conformability upc grade max. rpm dia. x w x ah qty./case 048011- 03993-0 6s fin 6,000 6" x 1/2" x 1" 4 048011- 01662-7 7s fin 048011- 03994-7 8s fin 048011- 01660-3 6s fin 6" x 1" x 1" 3 048011- 01661-0 7s fin 048011- 01675-7 8s fin 048011- 01664-1 7s fin 6" x 2" x 1" 2 048011- 05263-2 7s fin 4,500 8" x 1/2" x 3" 4 048011- 01678-8 8s fin 048011- 01665-8 6s fin 8" x 1" x 3" 3 048011- 01666-5 7s fin 048011- 01679-5 8s fin 048011- 01667-2 7s fin 8" x 2" x 3" 2 048011- 01683-2 7s fin 3,600 10" x 1" x 5" 048011- 05181-9 7s fin 3,000 12" x 1/2" x 5" 048011- 01669-6 6s fin 12" x 1" x 5" 1 048011- 01670-2 7s fin 048011- 01686-3 8s fin 048011- 01672-6 6s fin 12" x 2" x 5" 048011- 01673-3 7s fin 048011- 01689-4 8s fin 048011- 01690-0 7s fin 12" x 3" x 5" 048011- 17985-8 7s fin 2,250 16" x 2" x 10" see pages 72C77 for available accessories. scotch-brite ? xr metalworking wheels ? increased mineral loading and grinding aids ? provides a fast cut and improved wheel efficiency for extended life upc grade max. rpm dia. x w x ah qty./case 048011- 33695-4 ? ha 80 3,600 6" x 1/2" x 1" 2 048011- 33067-9 ha 120 048011- 33072-3 ? ha 240 048011- 33696-1 ? ha 80 6" x 1" x 1" 1 048011- 33068-6 ha 120 048011- 33073-0 ha 240 048011- 64506-3 ? ha 120 3,450 8" x 1/4" x 3" 2 048011- 33697-8 ? ha 80 8" x 1/2" x 3" 048011- 33069-3 ? ha 120 048011- 64445-5 ? ha 240 048011- 33698-5 ? ha 80 8" x 1" x 3" 1 048011- 33070-9 ? ha 120 048011- 33075-4 ha 240 048011- 33699-2 ? ha 80 1,750 12" x 1" x 5" 048011- 33071-6 ? ha 120 048011- 33076-1 ? ha 240 ? made-to-order scotch-brite ? convolute wheels (cont.) scotch-brite ? multi-finishing wheels ? produces uniform grain finishes on stainless steel and other metals ? highly conformable upc grade max. rpm dia. x w x ah qty./case 048011- 13170-2 2s crs 6,000 6" x 1" x 1" 3 048011- 13171-9 2s med 048011- 13172-6 2s fin 048011- 13176-4 2s crs 6" x 2" x 1" 2 048011- 13177-1 2s med 048011- 13178-8 2s fin 048011- 13183-2 2s med 4,500 8" x 1" x 3" 3 048011- 13184-9 2s fin 048011- 13185-6 2s crs 8" x 2" x 3" 2 048011- 13186-3 2s med 51736 31169 attention: wheels are available in other grades and sizes. if you need a specific wheel not listed, contact your 3m sales specialist or 3m authorized distributor. 94536 59 surface conditioning abrasives
see pages 72C77 for available accessories. scotch-brite ? convolute wheels (cont.) scotch-brite ? cut and polish wheels ? heavy-duty wheels for aggressive blending and finishing ? produce uniform results quickly and easily ? replace rubber bonded wheels, set-up wheels and flap wheels upc grade max. rpm dia. x w x ah qty./case 048011- 05253-3 ? 7a crs 6,000 6" x 1/2" x 1" 4 048011- 08931-7 ? 7a med 048011- 05182-6 5a fin 048011- 08946-1 ? 7a fin 048011- 03263-4 ? 7a crs 6" x 1" x 1" 3 048011- 03262-7 ? 7a med 048011- 02960-3 5a fin 048011- 03270-2 7a fin 048011- 03269-6 ? 7a vfn 048011- 93503-4 ? 5a fin 6" x 1" x 1-1/4" 048011- 03273-3 ? 7a crs 6" x 2" x 1" 2 048011- 03272-6 ? 7a med 048011- 02972-6 ? 5a fin 048011- 60043-7 ? 7a med 6" x 25" x 1" 1 048011- 05183-3 ? 7a med 4,500 8" x 1/2" x 3" 4 048011- 09018-4 ? 5a fin 048011- 14623-2 ? 7a fin 048011- 02974-0 ? 5a fin 8" x 1" x 1-1/4" 3 048011- 03277-1 ? 7a crs 8" x 1" x 3" 048011- 03276-4 7a med 048011- 02965-8 ? 5a fin 048011- 03275-7 ? 7a fin 048011- 03274-0 ? 7a vfn 048011- 92862-3 ? 5a fin 8" x 1-1/2" x 1-1/4" 2 048011- 08934-8 ? 7a med 8" x 1-1/2" x 3" 048011- 04156-8 ? 5a fin 048011- 02976-4 ? 5a fin 8" x 2" x 1-1/4" 048011- 03282-5 ? 7a crs 8" x 2" x 3" 048011- 03281-8 7a med 048011- 02967-2 ? 5a fin 048011- 03280-1 ? 7a fin 048011- 03279-5 ? 7a vfn 048011- 93674-1 ? 7a med 8" x 2-1/2" x 3" 1 ? made-to-order 51737 scotch-brite ? cut and polish wheels (cont.) upc grade max. rpm dia. x w x ah qty./case 048011- 03283-2 ? 7a med 4,500 8" x 3" x 3" 1 048011- 02979-5 ? 5a fin 048011- 93454-9 ? 7a crs 8" x 4" x 3" 048011- 92936-1 ? 7a med 048011- 93675-8 ? 7a med 8" x 5" x 3" 048011- 05248-9 ? 7a fin 8" x 7" x 3" 048011- 13488-8 ? 5a fin 8" x 20" x 3" 048011- 25617-7 ? 7a med 8" x 24" x 3" 048011- 15591-3 ? 5a fin 048011- 13486-4 ? 7a crs 8" x 25" x 3" 048011- 92938-5 ? 7a med 048011- 16463-2 ? 5a fin 048011- 60040-6 ? 7a vfn 048011- 04244-2 ? 7a med 3,000 12" x 1/2" x 5" 2 048011- 05256-4 ? 5a fin 048011- 03295-5 ? 7a crs 12" x 1" x 5" 1 048011- 03294-8 ? 7a med 048011- 02975-7 ? 5a fin 048011- 93677-2 ? 7a med 12" x 1-1/2" x 5" 048011- 02977-1 ? 5a fin 048011- 03300-6 ? 7a crs 12" x 2" x 5" 048011- 03299-3 7a med 048011- 02969-6 5a fin 048011- 03297-9 ? 7a vfn 048011- 03303-7 ? 7a med 12" x 3" x 5" 048011- 05908-2 ? 5a fin 048011- 03301-3 ? 7a vfn 048011- 05533-6 ? 7a med 12" x 4" x 5" 048011- 02983-2 ? 5a fin 048011- 05243-4 ? 7a vfn 048011- 16913-2 ? 5a fin 12" x 5" x 5" 048011- 27887-2 ? 5a fin 12" x 24" x 5" 048011- 60042-0 ? 7a crs 12" x 25" x 5" 048011- 60044-4 ? 7a med 048011- 60041-3 ? 7a vfn ? made-to-order 60 surface conditioning abrasives
see pages 72C77 for available accessories. scotch-brite ? convolute wheels (cont.) scotch-brite ? metal finishing wheels ? provides a consistent and uniform decorative brushed finish ? use to match #3 and #4 mill finishes ? removes minor imperfections and handling marks upc grade max. rpm size qty./case 048011- 05394-3 ? 6a crs 6,000 6" x 1/2" x 1" 4 048011- 05391-2 ? 5a med 048011- 01861-4 4a crs 6" x 1" x 1" 3 048011- 01863-8 5a crs 048011- 01866-9 6a crs 048011- 01860-7 ? 4a med 048011- 01862-1 5a med 048011- 01865-2 6a med 048011- 30012-2 ? 5a crs 6" x 1" x 1-1/4" 048011- 24110-4 ? 5a med 048011- 01868-3 4a crs 6" x 2" x 1" 2 048011- 01888-1 5a crs 048011- 01870-6 ? 6a crs 048011- 01867-6 4a med 048011- 01869-0 5a med 048011- 01889-8 ? 6a med 048011- 01891-1 ? 4a crs 6" x 3" x 1" 1 048011- 08891-4 ? 4a med 6" x 4" x 1" 048011- 09118-1 ? 5a crs 6" x 6" x 1" 048011- 14336-1 ? 5a crs 4,500 8" x 1/2" x 3" 4 048011- 16449-6 ? 5a med 048011- 05414-8 ? 4a crs 8" x 1" x 3" 3 048011- 01872-0 5a crs 048011- 01901-7 6a crs 048011- 08926-3 ? 4a med 048011- 01871-3 5a med 048011- 01900-0 ? 6a med 048011- 92896-8 ? 5a crs 8" x 1-1/2" x 3" 2 048011- 01875-1 ? 4a crs 8" x 2" x 3" 048011- 01904-8 5a crs 048011- 13453-6 ? 6a crs 048011- 01874-4 4a med 048011- 01876-8 5a med 048011- 01905-5 ? 6a med ? made-to-order 96879 scotch-brite ? metal finishing wheels (cont.) upc grade max. rpm size qty./case 048011- 15608-8 ? 5a crs 4,500 8" x 3" x 3" 1 048011- 13451-2 ? 6a crs 048011- 13452-9 ? 4a med 048011- 05395-0 ? 5a med 048011- 25612-2 ? 6a med 048011- 15607-1 ? 5a med 3,000 12" x 1/2" x 5" 2 048011- 05398-1 ? 5a crs 12" x 1" x 5" 1 048011- 15062-8 ? 6a crs 048011- 01916-1 5a med 048011- 08924-9 ? 6a med 048011- 25619-1 ? 6a med 12" x 1-1/4" x 5" 048011- 25621-4 ? 6a crs 12" x 1-1/2" x 5" 048011- 15326-1 ? 5a med 048011- 09612-4 ? 4a crs 12" x 2" x 5" 048011- 13449-9 5a crs 048011- 13448-2 ? 6a crs 048011- 01921-5 ? 4a med 048011- 01882-9 5a med 048011- 14617-1 ? 6a med 048011- 13446-8 ? 4a crs 12" x 3" x 5" 048011- 08902-7 ? 5a crs 048011- 92916-3 ? 4a med 048011- 08929-4 ? 5a med 048011- 16422-9 ? 5a med 12" x 3-1/2" x 5" 048011- 13445-1 ? 4a crs 12" x 4" x 5" 048011- 13071-2 ? 5a crs 048011- 18634-4 ? 6a crs 048011- 25615-3 ? 4a med 048011- 05392-9 ? 5a med ? made-to-order attention: wheels are available in other grades and sizes. if you need a specific wheel not listed, contact your 3m sales specialist or 3m authorized distributor. 61 surface conditioning abrasives
see pages 72C77 for available accessories. unitized wheels selection guides scotch-brite ? unitized wheel performance differences can be attributed to mineral (aggressiveness) and density (hardness). the combination of these two characteristics and subtle variations determine if the wheel will cut more aggressively or will be more durable and less conformable (see below). more aggressive less aggressive harder softer legend cp cut and polish unitized wheel exl exl unitized wheel cs clean and strip unitized wheel mf metal finishing unitized wheel * no mineral: use with abrasive compound. scotch-brite ? unitized wheel application cleaning deburring blending finishing polishing best exl deburring cut and polish metal finishing clean and strip density number (prefix to mineral) mineral abbreviations (prefix to grade) aaluminum oxide mineral ssilicon carbide mineral soft hard 2 4 6 7 8 9 10 11 62 surface conditioning abrasives cs xcs cs 7
scotch-brite ? exl unitized deburring wheels ? strong and efficient for deburring and polishing of all metal alloys ? excellent in resisting smearing and minimizing heat buildup on the work piece ? conformable wheel in a variety of densities and grades for maximum cut and durability upc grade max. rpm dia. x w x ah qty./case 048011- 15516-6 8a crs 35,100 1" x 1/8" x 1/8" 100 048011- 15517-3 6a med 048011- 13734-6 2s fin 1" x 1/4" x 1/8" 048011- 13752-0 8a crs 1" x 1" x 3/16" 50 048011- 15527-2 2a med 048011- 14063-6 6a med 048011- 13753-7 8a med 048011- 13713-1 2s fin 048011- 15514-2 8a crs 30,100 1-1/2" x 1/8" x 3/16" 80 048011- 15515-9 6a med 048011- 13714-8 2s fin 1-1/2" x 1/4" x 1/8" 048011- 14746-8 1-1/2" x 1/4" x 3/16" 048011- 15511-1 8a crs 22,100 2" x 1/8" x 3/16" 60 048011- 15512-8 6a med 048011- 13736-0 2s fin 16,100 2" x 1/4" x 1/8" 048011- 15513-5 2s fin 2" x 1/4" x 3/16" 048011- 13755-1 8a crs 22,100 2" x 1/4" x 1/4" 048011- 15529-6 2a med 16,100 048011- 13932-6 2s fin 048011- 13715-5 2s fin 2" x 1/2" x 1/4" 30 048011- 15462-6 8a med 18,100 3" x 1/8" x 1/4" 40 048011- 13763-6 8a crs 3" x 1/4" x 1/4" 048011- 15531-9 2a med 12,100 048011- 14067-4 6a med 18,100 048011- 13764-3 8a med 048011- 13716-2 2s fin 12,100 51730 scotch-brite ? unitized wheels see pages 72C77 for available accessories. scotch-brite ? exl unitized deburring wheels (cont.) upc grade max. rpm dia. x w x ah qty./case 048011- 13766-7 8a crs 18,100 3" x 1/4" x 3/8" 40 048011- 16054-2 2a med 12,100 048011- 15118-2 6a med 18,100 048011- 14753-6 8a med 048011- 14750-5 2s fin 12,100 048011- 14751-2 4a fin 18,100 048011- 14752-9 6s fin 048011- 13767-4 8a crs 15,100 3" x 1/2" x 1/4" 20 048011- 15532-6 2a med 10,000 048011- 13717-9 2s fin 048011- 13718-6 2s fin 3" x 3/4" x 1/4" 10 048011- 13739-1 8,500 4" x 1/4" x 1/4" 20 048011- 17498-3 2a med 4,500 6" x 1/4" x 1/2" 8 048011- 13741-4 2s fin 5,000 048011- 25678-8 6" x 1/4" x 3/4" 048011- 15534-0 2a med 4,500 6" x 1/2" x 1/2" 4 048011- 13719-3 2s fin 5,000 048011- 15831-0 6" x 1/2" x 5/8" 048011- 16545-5 2a med 4,500 6" x 1/2" x 1" 048011- 14379-8 2s fin 5,000 048011- 13742-1 6" x 1" x 1/2" 2 048011- 16544-8 2a med 4,500 6" x 1" x 1" 048011- 13743-8 2s fin 5,000 048011- 15827-3 4,000 8 x 1/4 x 1/2 8 048011- 15844-0 8" x 1/2" x 1/2" 4 048011- 15824-2 8" x 1/2" x 3/4" 048011- 15817-4 2,600 12" x 1/2" x 1-1/4" 2 attention: wheels are available in other grades and sizes. if you need a specific wheel not listed, contact your 3m sales specialist or 3m authorized distributor. 63 surface conditioning abrasives
see pages 72C77 for available accessories. 64 surface conditioning abrasives scotch-brite ? unitized wheels (cont.) scotch-brite ? clean and strip unitized wheel ? great for heavy duty cleaning applications ? open web construction wheel runs smooth and resists loading of soft coatings ? extra coarseness of web is perfect for removing scale, rust, surface contaminants and paints upc grade max. rpm dia. x w x ah qty./case 048011- 01003-8 7s xcs 35,100 1" x 1" x 3/16" 50 048011- 01005-2 20,100 2" x 1/2" x 1/4" 30 048011- 01009-0 14,100 3" x 1/2" x 1/4" 20 048011- 01012-0 3" x 1" x 1/4" 10 048011- 01021-2 10,000 4" x 1" x 1/4" 5 048011- 01032-8 7,000 6" x 1" x 5/8" 2 048011- 01034-2 6" x 1" x 1" scotch-brite ? metal finishing wheel ? highly conformable wheel applies uniform and consistent satin/antique finishes ? ideal for stainless steel to match #3 or #4 mill finishes and create brushed or satin finishes on cutlery ? great on softer metals such as aluminum, copper and brass to blend out minor surface imperfections and handling marks upc grade max. rpm dia. x w x ah qty./case 048011- 29257-1 5a med 6,000 6" x 1/2" x 1" 4 048011- 29259-5 6" x 1" x 1" 2 scotch-brite ? roloc ? exl unitized wheels ? strong, efficient products for edge deburring and finishing ? used with 3m ? roloc ? or 3m ? roloc ? + holder pads on a straight shaft or right-angle tool upc grade max. rpm size qty./case roloc tr (plastic button) 048011- 17185-2 2a med 22,100 2" 60 048011- 17183-8 2s fin 048011- 17190-6 6a med 048011- 17192-0 8a med 048011- 17186-9 2a med 15,100 3" 40 048011- 17184-5 2s fin 048011- 17191-3 6a med 048011- 17193-7 8a med 179831 scotch-brite ? cut and polish unitized wheel ? tightly layered unitized construction offers long life and durability ? excellent for aggressive heavy duty blending and finishing with uniform results ? good replacement for rubber bonded wheels and small set-up wheels upc grade max. rpm dia. x w x ah qty./case 048011- 03701-1 7a crs 35,100 1" x 1" x 3/16" 50 048011- 03700-4 7a med 048011- 01560-6 5a fin 048011- 08939-3 7a med 22,100 2" x 1/8" x 1/8" 60 048011- 03714-1 7a med 2" x 1/8" x 1/4" 048011- 03716-5 7a crs 2" x 1/4" x 1/4" 048011- 03715-8 7a med 048011- 01561-3 5a fin 048011- 03718-9 7a med 20,100 2" x 1/2" x 1/4" 30 048011- 03727-1 7a med 18,100 3" x 1/8" x 1/4" 40 048011- 03729-5 7a crs 3" x 1/4" x 1/4" 048011- 03728-8 7a med 048011- 01563-7 5a fin 048011- 15121-2 5a fin 3" x 1/4" x 3/8" 048011- 03705-9 7a med 15,100 3" x 1/2" x 1/4" 20 048011- 01565-1 5a fin 048011- 03732-5 7a med 3" x 1/2" x 3/8" 048011- 08878-5 5a fin 048011- 03738-7 7a med 3" x 3/4" x 3/8" 10 048011- 03740-0 7a med 3" x 1" x 1/4" 048011- 01578-1 5a fin 12,100 4" x 1/4" x 1/4" 20 048011- 01581-1 5a fin 7,500 6" x 1/4" x 1/2" 8 681784 94567 587540
see pages 72C77 for available accessories. 65 surface conditioning abrasives 159129 scotch-brite ? flap brush cpfb-s and cpfb-r+ ? heavy-duty brush ? excellent for removing handling marks and surface imperfections ? available on 1/4" shaft (cpfb-s) or 3m ? roloc ? + attachment system (cpfb-r+) upc grade max. rpm dia. x w x (shaft) qty./case cpfb-s 048011- 16622-3 a med 12,000 2" x 1" x 1/4" 25 048011- 05974-7 8,500 3" x 1-3/4" x 1/4" 10 cpfb-r+ 048011- 14588-4 a med 8,000 3" x 1-3/8" 10 51748 scotch-brite ? flap brush cffb-s and cffb-r ? ideal for decorative finishes and light deburring applications ? available on 1/4" shaft (cffb-s) or 3m ? roloc ? + attachment system (cffb-r) upc grade max. rpm dia. x w x (shaft) qty./case cffb-s 048011- 05975-4 a crs 8,500 3" x 1-3/4" x 1/4" 10 048011- 14781-9 s fin cffb-r 048011- 14587-7 a crs 8,000 3" x 1-3/8" 10 048011- 14783-3 s fin 160008 524406 scotch-brite ? specialty abrasives make tough jobs easy with these scotch-brite ? specialty abrasives. unique constructions for use on contours and flat areas on metal, wood, paint, coatings and more. scotch-brite ? combi wheel, combi-s ? made of alternating flaps of coated abrasive and scotch-brite ? web ? provides aggressive cut and fine finishes upc grade max. rpm dia. x w x shaft qty./case cffb-s 051144- 80801-4 80 8,000 3" x 1-3/4" x 1/4" 10 051144- 80678-2 p120 051144- 80799-4 p180 51752 scotch-brite ? radial bristle brush, ta ? excellent replacement for wire brushes ? use on bench motors for general purpose cleaning applications ? no flying wires yet higher cut rates ? very strong and flexible ? comes with adapters for multiple shaft sizes (1/2", 5/8", 3/4", 7/8", 1", 2" and 8") upc grade color max. rpm dia. x w qty./ case 048011- 24279-8 50 green 25,000 3" x 3/8" 40 048011- 24280-4 80 yellow 048011- 24281-1 120 white 048011- 27603-8 36 brown 6,000 6" x 1/2" x 1" 5 048011- 27605-2 50 green 048011- 27606-9 80 yellow
scotch-brite ? cpd5-r and cpd5-s discs ? five discs made of a durable web, ganged together on a shaft ? use for satin or antique finishing as well as light- to medium-duty cleaning applications ? available on a 1/4" shaft (cpd5-s) or 3m ? roloc ? + attachment system (cpd5-r) upc grade max. rpm dia. x w x (shaft) qty./case cpd5-s 048011- 14593-8 a med 10,000 3" x 1-1/4" x 1/4" 10 048011- 14779-6 8,000 4" x 1-1/4" x 1/4" cpd5-r 048011- 14594-5 a med 10,000 3" x 1-1/4" 10 048011- 14590-7 8,000 4" x 1-1/4" scotch-brite ? stars ? perfect for polishing internal diameters of pipe and tubing ? conformable scotch-brite ? construction assures complete cleaning and polishing of all surfaces upc grade max. rpm diameter qty./case 048011- 13370-6 a crs 24,000 1-1/2" 100 048011- 13800-8 a vfn 048011- 13371-3 a crs 2" 048011- 13803-9 a vfn 048011- 13372-0 a crs 18,000 3" 50 048011- 13802-2 a vfn 048011- 13373-7 a crs 4" 048011- 13804-6 a vfn 524413 scotch-brite ? clean and strip discs d2 ? aggressive web is excellent for cleaning welds, rust, paint and coatings upc grade max. rpm dia. x w x shaft qty./case 048011- 14780-2 s xcs 8,000 4" x 1" x 1/4" 10 048011- 14784-0 4" x 1" 8 51747 159131 scotch-brite ? cross buffs ? versatile and flexible shape ideal for light deburring, cleaning, finishing and polishing internal diameters and hard to reach areas ? available in a vfn for high luster finishes or a med for more aggressive applications requiring increased durability upc grade max. rpm diameter qty./case 048011- 64299-4 a med 20,000 1 " x 3/8" x 2 ply x 8-32 50 048011- 64446-2 a vfn 048011- 64305-2 a med 1-1/2" x 3/8" x 2 ply x 8-32 048011- 64526-1 a vfn 048011- 64447-9 a vfn 1-1/2" x 1/2" x 2 ply x 8-32 100 048011- 64312-0 a med 12,000 2 " x 1/2" x 2 ply x 8-32 25 048011- 64433-2 a vfn 524398 see pages 72C77 for available accessories. 524413 66 surface conditioning abrasives scotch-brite ? specialty abrasives (cont.)
67 surface conditioning abrasives scotch-brite ? hand pads ? excellent products for hand finishing and cleaning of woods, metals and composites ? ideal for wood finishing, paint prep and general cleaning upc grade color cat. no. w x l qty./case 048011- 04050-9 a med tan 7440 6" x 9" 40 048011- 04051-6 s med gray 7446 048011- 04029-5 a vfn maroon 7447 60 048011- 04229-9 7447 bulk 048011- 24037-4 8447 048011- 04028-8 s ulf light gray 7448 scotch-brite ? hand pads 424851 scotch-brite ? hand pad selection guide blending finishing deburring cleaning good multi-flex multi-flex multi-flex better 7446, 7447 7440, 7447, 7448 7447 best 7440, 8447 7446, 8447 7440 8447 less aggressive/finer finish more aggressive/coarser finish scotch-brite ? ultra fine hand pad 7448 (gray) ? ultra fine consistent finishes on metals, woods, plastics and composites ? provides similar performance as steel wool grade 00 scotch-brite ? general purpose hand pad 7447 (maroon) ? standard for surface conditioning worldwide ? clean, blend, finish, and deburr faster, easier and with better results than conventional abrasives ? provides similar performance as steel wool grade 1 scotch-brite ? production hand pad 8447 (maroon) ? high cut for paint preparation, blending, and scuffing ? long life performance on aluminum, stainless steel, plastics, wood and fiberglass ? provides similar performance as steel wool grade 2 scotch-brite ? blending hand pad 7446 (gray) ? specially designed for hand blending and finishing stainless steel ? mineral coarseness blends surface scratches on many metals, wood and synthetic surfaces ? provides similar performance as steel wool grade 3 scotch-brite ? heavy duty hand pad 7440 (tan) ? most durable and aggressive pad for quick stock removal ? cuts fast to remove contaminants and oxides in the most demanding cleaning and finishing applications ? provides similar performance as steel wool grade 4 see pages 72C77 for available accessories.
scotch-brite ? production clean and finish rolls ? precision web/mineral configuration for most uniform general purpose finishing in roll form ? excellent for critical finishes and long life upc grade color w x l qty./case 048011- 28175-9 ? a vfn maroon 4" x 30' 3 048011- 28176-6 ? 6" x 30' 2 ? made-to-order 14399 scotch-brite ? multi-flex sheet rolls ? highly conformable non-woven web roll is perforated to easily tear into sixty 8" x 4" sheets ? excellent sharpness and conformability for cleaning and finishing surfaces by hand upc grade color w x l qty./case 051131- 07521-4 a vfn maroon 8" x 20' 2 051131- 07522-1 s ulf light gray 51768 scotch-brite ? cut and polish rolls ? a unique and aggressive material for cleaning and finishing ? sturdy, long lasting web material is great for heavy industrial cleaning and light deburring applications ? works well for stropping and other bench applications upc grade w x l qty./case 048011- 04085-1 a med 1" x 30' 2 048011- 05206-9 2" x 30' 048011- 05207-6 4" x 30' 14432 scotch-brite ? clean and finish rolls ? highly conformable scotch-brite ? web can be cut to desired length for hand sanding or oscillating sanders upc grade w x l min./case 048011- 00291-0 ? a fin 2" x 30' 6 048011- 00260-6 a vfn 048011- 00261-3 3" x 30' 4 048011- 00264-4 a med 4" x 30' 3 048011- 00265-1 a fin 048011- 00266-8 a vfn 048011- 00270-5 048011- 00263-7 f sfn 048011- 00267-5 048011- 00268-2 s ulf 048011- 00262-0 talc 048011- 00274-3 a med 6" x 30' 2 048011- 00275-0 a fin 048011- 00276-7 a vfn 048011- 00284-2 12" x 30' 1 048011- 00254-5 talc ? made-to-order 51764 scotch-brite ? roll and sheet roll selection guide blending finishing deburring cleaning good multi-flex multi-flex multi-flex better clean and finish clean and finish clean and finish best cut and polish production clean and finish cut and polish production clean and finish see pages 72C77 for available accessories. 68 surface conditioning abrasives 601735
3m ? general purpose type 27 wheel ? aluminum oxide mineral ? durable wheel provides exceptionally long life at a value price ? excellent, economical choice for general purpose grinding on steel upc grade max. rpm dia. x thk. x ah qty./ case 051135- 92312-2 24 13,300 4-1/2" x 1/4" x 7/8" 40 051135- 92314-6 4-1/2" x 1/4" x 5/8C11 int 051135- 92313-9 8,500 7" x 1/4" x 7/8" 20 051135- 92315-3 7" x 1/4" x 5/8C11 int 357083 3m ? green corps ? type 27 flexible grinding wheel ? 3 m ? ceramic abrasive grain ? can be used on a wide variety of metals ? smooth running wheels produce less noise and vibration when grinding ? must be used on a tool with a guard upc grade max. rpm dia. x thk. x ah qty./case 051111- 50440-6 36 13,300 4-1/2" x 1/8" x 7/8" 20/40 051111- 50442-0 46 051111- 50443-7 60 051111- 50444-4 80 051111- 50445-1 36 8,500 7" x 1/8" x 7/8" 20/20 051111- 50446-8 46 051111- 50447-5 60 3m ? green corps ? type 27 depressed center wheel ? 3 m ? ceramic abrasive grain ? provides exceptionally fast cut and long life ? use with right angle grinders with a guard upc grade max. rpm dia. x thk. x ah qty./case 051111- 61010-7 24 15,000 4" x 1/4" x 3/8" 60 051111- 55991-8 24 13,300 4-1/2" x 1/4" x 7/8" 40 051111- 55992-5 36 051111- 55960-4 24 4-1/2" x 1/4" x 5/8C11 int 051111- 55961-1 36 051111- 55989-5 24 8,500 7" x 1/4" x 7/8" 20 051111- 55990-1 36 051111- 55958-1 24 7" x 1/4" x 5/8C11 int 051111- 55959-8 36 051111- 55987-1 24 6,600 9" x 1/4" x 7/8" 051111- 55956-7 24 9" x 1/4" x 5/8C11 int 148220 3m ? green corps ? type 27 cutting and grinding wheel ? 3 m ? ceramic abrasive grain ? safe to grind outer face and cut with edge of same wheel upc grade max. rpm dia. x thk. x ah qty./ case 051135- 92316-0 36 13,300 4-1/2" x 1/8" x 7/8" 40 051135- 92318-4 4-1/2" x 1/8" x 5/8C11 int 051135- 92317-7 8,500 7" x 1/8" x 7/8" 20 051135- 92319-1 7" x 1/8" x 5/8C11 int 3m ? bonded wheels product mineral type all metals better general purpose aluminum oxide t27 best 3m ? green corps ? 3m ? ceramic abrasive grain t27 t27 flexible t27 cut and grind t28 durable and fast cutting wheels for your toughest grinding and cutting applications. run with 3m ? grinders or 3m ? cut-off wheel tools for optimal performance. for use on all metals. do not use on tools without guards. 3m ? bonded type 27 wheels type 27 227096 type 28 3m ? green corps ? t-28 depressed center wheel ? made with 3m ? ceramic abrasive grain for fast cut rates and long life ? t28 shape works well when grinding at lower tool angles (15C25 degrees) ? great for weld removal, grinding in tight areas and other mro applications upc grade max. rpm dia. x thk. x ah qty./ case 051141- 28327-2 24 8,500 7" x 1/4" x 5/8 int 10 3m ? bonded type 28 wheels bonded abrasives 69 see pages 72C77 for available accessories. for safe applications using cut-off wheels, refer to ansi b-7.1 for details. always use appropriate wheel guards. refer to ansi b-186.1 for guarding requirements.
product mineral type all metals better general purpose aluminum oxide t1 best 3m ? green corps ? 3m ? ceramic abrasive grain t1 high performance t1 3m ? general purpose cut-off wheels ? value priced wheel provides fast cut and long life ? best on carbon steel ? must be used with ansi-a pproved flanges for t ype 1 cut-off wheels ? do not use on tools without guards upc max. rpm dia. x w x ah min./case 051141- 20447-5 10,200 6" x .045" x 7/8" 50/100 051141- 20448-2 21,000 4" x 1/32" x 3/8" 051141- 20449-9 4" x 1/16" x 3/8" 3m ? cut-off wheels 3m ? high performance cut-off wheel ? 3 m ? ceramic abrasive grain ? provides faster cut and longer life on various substra tes inc luding stainless steel ? must be used with ansi-a pproved flanges for t ype 1 cut-off wheels ? do not use on tools without guards upc max. rpm dia. x w x ah min./case 051141- 20349-2 10,200 6" x .045" x 7/8" 50/200 3m ? green corps ? cut-off wheels ? 3 m ? ceramic abrasive grain ? provides high cut ra tes and long life on various substra tes, inc luding fiberglass, stainless steel and carbon steel ? must be used with ansi-a pproved flanges for t ype 1 cut-off wheels ? do not use on tools without guards upc max. rpm dia. x w x ah qty./case 051144- 83487-7 42,000 2" x 1/16" x 1/4" 50/50 051144- 82238-6 35,000 3" x 1/32" x 1/4" 051131- 01989-8 35,000 3" x 1/32" x 3/8" 5 wheels/pack 10 packs/case 051131- 01985-0 50/50 051131- 01990-4 28,000 3" x 1/16" x 3/8" 5 wheels/pack 10 packs/case 051131- 01986-7 50/50 051144- 83488-4 21,000 4" x 1/16" x 3/8" 50/50 051144- 88755-2 26,250 4" x 1/32" x 1/4" 051131- 01994-2 26,250 4" x 1/32" x 3/8" 50/50 051141- 20275-4 13,300 4-1/2" x 3/64" x 7/8" 50/200 051141- 20276-1 12,200 4-59/64" x 3/64" x 7/8" 213792 for safe applications using cut-off wheels, refer to ansi b-7.1 for details. always use appropriate wheel guards. refer to ansi b-186.1 for guarding requirements. bonded abrasives 70 see pages 72C77 for available accessories.
kits and packs 3m ? ntn maintenance and repair kit ? variety of easy mounting (no mounting tools required) coated and surface conditioning 4-1/2" discs for use on right angle tools ? contains 1 each of the following: C 3m ? tn disc pad C scotch-brite ? light grinding and blending disc, tn, super duty C scotch-brite ? clean and strip xt disc, tn, s xcs C 3m ? fibre disc 785c, tn, grade 36 C 3m ? flap disc 747d, tn, grade 36 upc (048011-) size min./case 33013-6 4-1/2" 1/5 291768 3m ? roloc ? disc pack 982s and 983s ? includes roloc ? surface conditioning discs, 3m ? coated abrasive discs and 3m ? roloc ? disc pad upc (051144-) catalog no. size min./case 82899-9 982s 2" 1/5 82900-2 983s 3" 3m ? roloc ? disc pack 985s ? contains a variety of grades of 2" and 3" non-woven 3m ? roloc ? surface conditioning discs ? also contains 2" and 3" disc pads and 1/4" threaded shaft upc (048011-) size min./case 18254-4 2" and 3" 1/5 3m ? roloc ? bristle disc pack 983bs ? contains a variety of grades of 3m ? roloc ? bristle discs 3" diameter x 5/8" trim ? includes a disc pad holder upc (048011-) size min./case 18697-9 3" 1/5 14374 scotch-brite ? surface conditioning disc pack 920s ? contains a variety of grades of 2" and 3" non-woven surface conditioning discs ? used for cleaning, finishing, blending and deburring applications ? includes 922 and 923 disc pad holder upc (048011-) size min./case 18253-7 2" and 3" 1/5 312784 scotch-brite ? surface conditioning disc pack 9145s, 915s, 917s ? contains a variety of grades of non-woven surface conditioning discs ? used for cleaning, finishing, blending and deburring applications ? includes 9145 disc pad holder upc (048011-) max rpm catalog no. size min./case 14105-3 13,000 9145s 4-1/2" 1/5 08713-9 10,000 915s 5" 04270-1 6,000 917s 7" 312741 9145s shown scotch-brite ? unitized wheel pack 990s ? contains several scotch-brite ? external unitized wheels 1" x 1" x 3/16" and 3" x 1/4" x 3/8" in a variety of densities and grades ? also includes 936 and 990 mandrels upc (048011-) size min./case 18245-2 1" x 1" x 3/16" and 3" x 1/4" x 3/8" 1/5 352098 scotch-brite ? hand pad trial pack 961s ? contains 1 each of the following: C scrubbing sponge 74 C light duty pad 6448 C heavy duty pad 7440 C light duty cleansing pad 7445 C blending pad 7446 C general purpose pad 7447 C ultra fine pad 7448 C production pad 8447 C twist-lok ? pad holder 961 upc (048011-) size min./case 17144-9 6" x 9" 5 119534 for appropriate product maximum operating speed, see kit package safety insert. kits and packs 71
accessories 72 product name upc qty./case for use with size/description max rpm 3m ? fibre disc accessories 3m ? disc pad hub ? 051141-28442-2 10 short shaft tools ? 2-1/2" diameter; 3/8C24 metal insert n/a 051144-45205-7 3m ? disc pad face plates (all sizes) ? 2-1/2" diameter; 5/8C11 metal insert 051144-88743-9 3m ? disc pad face plates ( all sizes, tool shaft length 1/2" or less) ? 051144-45190-6 3m ? disc pad face plates (7" or larger) ? 4-1/2" diameter; 5/8C11 metal insert 3m ? low profile disc pad hub ? 051141-28476-7 3m ? disc pad face plates ( all sizes, tool shaft length 1/2" or less) ? 2-1/2" diameter; 5/8C11 metal insert n/a 3m ? disc pad face plates 051144-13325-3 10 fibre discs 4-1/2" diameter; smooth; medium C gray 13,300 051144-14270-5 4-1/2" diameter; smooth; hard C black 051141-28443-9 4-1/2" diameter; ribbed; extra hard C red 051144-81734-4 5" diameter; ribbed; medium C gray 12,000 051144-81733-7 5" diameter; ribbed; hard C black 051144-81732-0 5" diameter; ribbed; extra hard C red 051144-80516-7 7" diameter; ribbed; medium C gray 8,600 051144-80515-0 7" diameter; ribbed; hard C black 051144-80514-3 7" diameter; ribbed; extra hard C red 3m ? fibre disc backup pad and retainer nut 051141-28530-6 1 4" fibre discs with 5/8" center hole 4" diameter; 3/8C24 int 15,000 3m ? tn quick change disc backup pad 051111-56573-5 5 4-1/2" tn discs 4-1/2" x 5/8C11 int 13,300 3m ? disc retainer nuts 051111 -51047-6 10 3m ? disc pad face plates and disc pad hubs 5/16" depth; 5/8C11 thread n/a 051144 -05622-4 3/8" depth; 5/8C11 thread 051144 -05621-7 1/2" depth; 5/8C11 thread 051144 -05620-0 5/8" depth; 5/8C11 thread 3m ? disc holder adapter no. 9 048011-22971-3 10 converts grinders with m10C1.25, m10C1.5, or 3/8C24 external threaded shaft to a 5/8C11 external threaded shaft m10C1.25 int n/a 048011-22972-0 m10C1.50 int 048011-22970-6 3/8C24 int 3m ? flap discs/bonded wheels accessories flap disc/ grinding wheel adapter nut 051144-88765-1 1 pair/5 pairs secures 4-1/2" diameter flap discs or 4-1/2" grinding wheels to right angle tool with a 5/8C11 threaded shaft 5/8 C11 thread size n/a 51696 12896 51694 51695 accessories 158149 352092 712406 ? also for use with scotch-brite light grinding and blending discs.
accessories 73 product name upc qty./case for use with size/description max rpm 3m ? flap discs/bonded wheels accessories (cont.) flap disc holder 051144-88769-9 1 backup plate for 7" diameter flap discs or 8" diameter type 27 grinding wheels 4" diameter; 5/8C11 thread size n/a 3m ? green corps ? flexible grinding disc 051111-51046 5/100 backup plate for 4-1/2" center hole flexible grinding wheel 7/8" center hole diameter; 3-3/8" diameter; clear n/a 051111-51045 backup plate for 7" center hole flexible grinding wheel 7/8" center hole diameter; 4-5/8" diameter; clear 3m ? roloc ? disc accessories 3m ? roloc ? tr disc pads 051144-45101-2 5 3m ? roloc ? tr discs 1" diameter; medium; 1/4C20 int 30,000 051144-45099-2 1-1/2" diameter; medium; 1/4C20 int 051144-45100-5 1-1/2" diameter; hard; 1/4C20 int 051144-45095-4 2" diameter; medium; 1/4C20 int 25,000 051144-45096-1 2" diameter; hard; 1/4C20 int 051144-45092-3 3" diameter; medium; 1/4C20 int 18,000 051144-45091-6 3" diameter; hard; 1/4C20 int 20,000 051144-45179-1 4" diameter; medium; 1/4C20 int 12,000 051141-28474-3 4" diameter; hard; 3/8C24 int 051141-28475-0 4" diameter; extra hard; 3/8C24 int 051144-83242-2 4" diameter; medium; 5/8C11 int 051144-83489-1 4" diameter; hard; 5/8C11 int 051144-83980-3 4" diameter; extra hard; 5/8C11 int 3m ? roloc ? cool running disc pads 051111-56479-0 5 3m ? roloc ? tr discs 4"; 3/8C24 int 051141-28473-6 4"; 5/8C11 int 3m ? roloc ? ts or tsm disc pads 051144-77729-7 5 3m ? roloc ? tsm discs and screw on abrasive discs 1-1/2"; medium 30,000 051144-77728-0 1-1/2"; hard 051144-14211-8 2"; medium 25,000 051144-14212-5 2"; hard 051144-14215-6 3"; medium 18,000 051144-14216-3 3"; hard 20,000 3m ? roloc ? tp disc pads 051144-14201-9 5 3m ? roloc ? tp discs 3"; medium; 1/4C20 int 18,000 051144-14202-6 3"; hard; 1/4C20 int 20,000 1/4" threaded shaft 051144-45102-9 10/50 used on 3m ? roloc ? disc pads with 1/4C20 int 1/4" x 1/4C20 thread n/a accessories 78458 12923 12870 221758 158006 215540 158318 733191
accessories 74 product name upc qty./case for use with size/description max rpm 3m ? roloc ? disc accessories (cont.) 3m ? roloc ? + holder 048011-15408-4 5 3m ? roloc ? unitized wheels, roloc ? + products, brush and disc accessories 1" diameter x 1/4" shaft diameter 25,000 scotch-brite ? light grinding and blending disc accessories 3m ? disc pad face plates* 051144-14270-5 10 light grinding and blending discs 4-1/2" diameter; smooth; hard C black 13,300 051141-28443-9 4-1/2" diameter; ribbed; extra hard C red 051144-81733-7 5" diameter; ribbed; hard C black 12,000 051144-81732-0 5" diameter; ribbed; extra hard C red 051144-80515-0 7" diameter; ribbed; hard C black 8,600 051144-80514-3 7" diameter; ribbed; extra hard C red 3m ? hook-and-loop disc pad holder 051141-20245-7 1 scotch-brite ? light grinding and blending disc accessories 7" x 7/8" center post; 5/8C11 int 8,500 scotch-brite ? disc accessories 3m ? hook-and-loop disc pad holders 048011-07494-8 10 scotch-brite ? surface conditioning discs 2" (1/4" shank); catalog no. 922 23,000 048011-04132-2 3" (1/4" shank); catalog no. 923 20,000 048011-07492-4 5 4" (1/4" shank); catalog no. 924 13,000 048011-05674-6 1 4" x 1/8" x 3/8" 5/8C11 int; catalog no. 914 048011-14111-4 4-1/2" x 5/8C11 int; catalog no. 9145 048011-05680-7 5" x 5/8C11 int; catalog no. 915 048011-09448-9 5" x 5/16C24 ext; catalog no. 905 10,000 048011-09450-2 7" x 5/8C11 int; catalog no. 917 6,000 051141-20279-2 7" x 1" x 5/8C11 int; catalog no. 947th 048011-09451-9 8" x 5/16" x 3/8" 5/8C11 int; catalog no. 918 accessories disc pad holder no. 905 51713 51732 disc pad holder no. 947th 636899 95288 disc pad holder no. 918 disc pad holder no. 924 369359 disc pad holder no. 914 614622 disc pad holder no. 917 14469 disc pad holder no. 922 and 923 14470 disc pad holder no. 9145 and 915 215543 51695 * must be used with 3m ? disc pad hubs. see page 72.
accessories product name upc qty./case for use with size/description max rpm max opm scotch-brite ? disc accessories (cont.) 3m ? tn quick change disc backup pad 051111-56573-5 5 4-1/2" tn discs 4-1/2" x 5/8C11 int 13,300 n/a mandrels ?? 048011-13968-5 5 furnished complete with washers to fit available wheel and disc sizes ?? catalog no. 933; 2" x 1/4" x 1" 14,000 n/a 048011-04021-9 1 catalog no. 934; 3-1/16" x 1/4" x 2-1/2" 12,000 n/a 3m ? wheel adapter kits 051141-28419-4 1 3m ? inline sanders; 4", 6", 8" scotch-brite ? surface conditioning discs; wheels with 1/2"C1" center holes part no. 28419; 1/2C20 ext see mos of abrasive disc or wheel n/a 051144-45038-1 1 part no. 45038; 5/8C11 ext n/a 3m ? spindle extender kit 048011-04019-6 1 part no. 300 n/a 3m ? hookit ? disc accessories 3m ? hookit ? disc pad 051131-05755-5 10 scotch-brite ? coating removal discs 5" x 3/8" x 5/16C24 ext 12,000 12,000 051144-85096-9 5" x 5/8" x 5/8C11 int 12,000 n/a 051144-13625-4 5" x 3/4" x 5/16C24 ext 10,000 12,000 051144-85105-8 5 x 3/4" x 5/8C11 int 12,000 n/a 051144-13627-8 1 7" x 1" x 5/8C11 int 6,000 n/a 3m ? stikit ? disc accessories 3m ? stikit ? disc pads 051131-05545-2 10 3m ? stikit ? discs 5" x 11/16" 5/16C24 ext; low profile finishing 12,000 12,000 051131-05546-9 6" x 11/16" 5/16C24 ext; low profile finishing 10,000 12,000 051131-05555-1 5" x 3/8" 5/16C24 ext; low profile 12,000 12,000 051131-05556-8 6" x 3/8" x 5/16C24 ext; low profile 10,000 12,000 051144-05575-3 1/10 5" x 3/4" x 5/16C24 10,000 12,000 051144-05576-0 6" x 3/4" x 5/16C24 051144-05579-1 1 8" x 5/8C11 int 3,000 n/a 051111-55813-3 5 5" x 1/2" 5/8C11 int 12,000 n/a 051141-20351-5 10 5" x 3/8" x 5/16C24 ext; red foam; low profile 12,000 12,000 051141-20354-6 6" x 3/8" x 5/16C24 ext; red foam; low profile 12,000 12,000 51708 100480 51720 mandrel no. 934 1/2" shaft dia. 12864 disc mandrel no. 933 or 934 mandrel no. 933 1/4" shaft dia. 14360 ?? also for use with unitized wheels. accessories 75 352092
accessories 76 product name upc qty./case for use with size/description max rpm (max opm) 3m ? stikit ? disc accessories (cont.) 3m ? stikit ? disc pads (cont.) 051144-81821-1 10 3m ? stikit ? discs 5" x 3/4" 5/16C24 ext 10,000 (12,000) 051144-82189-1 5" x 3/4" 5/8C11 int 12,000 051144-88736-1 5" x 3/8" 5/16C24 ext 10,000 (12,000) 3m ? psa disc accessories psa disc holder 051144-45070-1 10 any air or electric grinding tool that accommodates a 1/4" shank; supports 248d/348d psa disc 2" diameter 15,000 051144-05510-4 3" diameter 10,000 051144-45068-8 5 5" diameter 6,000 unitized wheel accessories mandrels 048011-04018-9 5 scotch-brite ? unitized wheels mandrel no. 936 ; 2-1/16" x 1/4" x 3/4" 22,200 048011-15012-3 mandrel no. 990 with 3 wheel; 1-3/4" x 1/4" x 1" 18,200 convolute wheel accessories flange adapter kit no. 5 048011-16859-3 1 set 6" wheels; telescoping wheel adapters 1" and 1/2" wide to reduce 1" wheel cores to fit 1/2", 5/8", 3/4", or 7/8" shafts; must be used with side flanges 1" x 1/2" x 1/2" n/a 048011-16860-9 1" x 1" x 1/2" flap wheel accessories wheel adapter kit no. 3 051144-45035-0 1 two arbor hole (plug type) adapters for 6" and 8" diameter flap wheels 1" od x 1/2" id n/a 051144-45034-3 1" od x 5/8" id 051144-45033-6 1" od x 3/4" id 051144-45032-9 1" od x 7/8" id wheel adapter kit no. 81a 051144-45081-7 1 for t84 flap wheels 1/4" x 1/4C20 int n/a star accessories mandrel no. 944 048011-13928-9 1 scotch-brite ? stars for cleaning and polishing internal diameters of pipe and tubing 1/4" x 1/4C20 ext 25,100 cross buff accessories 3m ? mandrel 048011-14307-8 1 scotch-brite ? cross buffs for cleaning and polishing internal diameters of pipe and tubing 1/4" x 8C 32 ext dependent upon abrasive product used cartridge roll accessories 3m ? mandrels 051144-45119-7 25 screw-type mandrels for securing cartridge rolls to tool 1/8" x 1" x 1/4" 24,000 (1/2" and smaller cartridge roll diameter); 16,000 (5/8"C 3/4" cartridge roll diameter) 051144-45117-3 3/16" x 1" x 1/4" 051144-45118-0 3/16" x 1-1/2" x 1/4" accessories 51733 mandrel no. 936 51734 mandrel no. 990 51738 158019 51755 51708 51710 85398 158320 157990
product name upc qty./case for use with size/description max rpm cross and square pad accessories 3m ? square and cross pad mandrel 051144-14308-5 1 used for holding square and cross pads with 1/4C20 and 8C 32 internal threaded inserts 1/4" x 1/4C20 ext dependent upon abrasive product used 051144-14307-8 1/4" x 8C32 ext 051141-28385-2 5 1/4" x 3C48 ext band and belt accessories rubber slotted expander wheels 051144-77717-4 1 slotted wheels for use with bands 1" x 1" x 1/4" 18,000 051144-77718-1 1-1/2" x 1" x 1/4" 14,000 051144-77720-4 2" x 1" x 1/4" 12,000 051144-77721-1 2" x 2" x 1/4" 6,000 051144-77722-8 3" x 3" x 5/8Cint 051141-28348-7 5" x 3-1/2" 5/8" arbor hole 3,500 051141-28349-4 3-1/4" x 3" 5/8" arbor hole rubber cushion polishing wheels 051144-45159-3 1 use with bands when creating fine finishes 1/4" x 1/2" x 1/8" 23,000 051144-45156-2 1/2" x 1/2" x 1/4" 30,000 051144-45153-1 1/2" x 1" x 1/4" 15,000 051144-45152-4 1/2" x 1-1/2" x 1/4" 051144-45145-6 3/4" x 1" x 1/4" 17,000 051144-45144-9 3/4" x 1-1/2" x 1/4" 10,000 051144-45139-5 1" x 1" x 1/4" 18,000 051144-45138-8 1" x 1-1/2" x 1/4" 10,000 051144-45132-6 1-1/2" x 1" x 1/4" 14,000 051144-45131-9 1-1/2" x 1-1/2" x 1/4" 10,000 051144-45130-2 1-1/2" x 2" x 1/4" 8,000 051144-45129-6 2" x 1" x 1/4" 11,000 051144-45127-2 2" x 2" x 1/4" 6,000 051144-45124-1 3" x 3" x 3/8" 3,000 051144-45123-4 3" x 3" x 1/2" utility cloth sheet and roll accessories forked spindle 051144-45121-0 10 for attaching utility cloth strips 1/4" x 3" n/a wetordry ? accessories 3m ? wetordry ? sponge pad 051131-05526-1 50 wetordry ? paper sheets 2-3/4" x 5-1/2" x 3/8" n/a 3m ? stikit ? soft hand pad 051144-05530-2 5/10 stikit ? sheet rolls scotch-brite ? hand pad accessories scotch-brite ? pad holder no. 961 048011-09493-4 10 scotch-brite ? hand pads; provides increased leverage and eliminates finger marks 3-1/2" x 4-3/4" n/a scotch-brite ? roll accessories mini mandrel no. 935 048011-04020-2 5 scotch-brite ? strips to clean and polish inner diameters and other tight areas 2-7/8" x 1/4" 14,000 accessories 51757 51758 51772 51766 14475 591935 accessories 77
superabrasive wheels for cutting tool manufacturing 78 the superabrasive products featured in this catalog are 3ms best, go-to wheels for cutting tool applications ranging from short runs and re-sharpening to lights-out and long production runs. all are in-stock, and are available for fast, two-day shipping within the u.s. if you require an item that is not listed, please contact your 3m customer service representative at 1-800-736-2500. 2-day shipping on stock wheels within the u.s.! typical abrasive wheels used for round tool grinding gashing 1v1 (30, 45) 240C320 grit primary relief 11v9, 11a2 240C600 grit secondary relief 11v9, 11a2 240C600 grit 1 cut-off 1a1r 80C100 grit 4 2 3 fluting 1v1, 1a1, 1f1 (5, 10, 20) 180C240 grit 6 od grinding 1a1 220C320 grit 5 end work 11a2, 11v9, 11v5 150C220 grit 7 gashing grinding a slot or notch along the cutting face to allow for chip fow. primary relief removing material directly behind the cutting edge to provide clearance. secondary relief a slight bevel next to the primary relief. cut-off using a thin wheel to trim blanks to length. typically used on the cutting end of the tool when re-grinding and on the shank end when forming a blank. od grinding grinding to fnal diameter. fluting flutes are the helical or straight grooves in the body of the tool. this provides a pathway to permit the removal of chips, and to allow coolants to reach the cutting surface. end work grinding a small clearance, or relief angle, on the face (tip) of the tool. 1 2 3 4 6 5 7 when to use diamond vs. cbn for optimal grinding results, make sure you know what material the tools are made of. round tools can be made out of any of these materials ? carbide ? non-ferrous metals ? pcd ? cermets ? polycrystalline cbn/ diamond (pcbn) diamond abrasive ? tool steel ? high speed steel cbn abrasive cant find what you need? simply provide us with the following information, and well help you select the optimal product for your application. contact 3m customer service for more information. e-mail fax phone superabrasives@mmm.com 973-884-0392 800-736-2500 to order, specify: wheel shape, dimension, mineral, grade and product id. 1. are you manufacturing new tools or resharpening? manufacturing resharpening 2. what is your application? fluting od grinding step grinding gashing primary relief other end work secondary relief 3. what kind of material are you grinding? carbide high speed steel other 4. what type of equipment are you using? cnc grinder manual tool & cutter other if cnc grinder...what is the model? anca hp walters hp other rollomatic hp tru tech hp hp 5. what type of coolant are you using? straight oil water based other chilled? yes no 6. what is the size/grade of your wheels(s)? shape diameter thickness hole grade 1f1 1v1 11a 2 12a2 11v9 12v9 1a1r other: also specify: radius: rim width: face angle: rim width: 7. what do you want to change/accomplish? cut faster less frequent sticking other better finishing run longer without re-truing 8. which wheels have you tried? which 3m wheels in this brochure have you tested? if none, what wheels do you currently use?
product performance (diamond / cbn) 654dj / 144di 665pk / 164pk 650hj / 154hk ? phenolic resin bond ? good cut rate/stock removal ? holds shape ? use for lower temperature operations ? can be run with water ? ideal for small re-grind shops or in-house re-sharpening ? polyimide resin bond ? higher cut rate/fast stock removal ? better form retention ? designed for higher temperature operations ? hybrid bond ? fastest cut rate ? best form retention ? designed for higher temperature operations than polyimide bond ? reduced frequency of dressing and minimal white sticking required ? ideal for long, uninterrupted runs fluting wheel performance characteristics 3m has six standard constructions that are ideal for a variety different operations. superabrasive wheels 79 3m ? fluting wheels 3m ? fluting wheel shape 1a1 (cont.) dimensions d t ah* grade bond** prod id upc ( 051141-) min./ case diamond abrasive 1a1 (cont.) 5" 1/2" ah* x = 3/8 d220 h 650hj 31276-7 1 p 665pk 54820-3 r 654dj 31294-1 5" 3/4" ah* x = 3/8 h 650hj 54916-3 p 665pk 54917-0 r 654dj 54918-7 6" 1/2" ah* x = 3/8 h 650hj 55462-4 p 665pk 55464-8 r 654dj 55463-1 cbn abrasive 1a1 4" 1/2" ah* x = 3/8 b180 h 154hk 55465-5 1 p 164pk 55466-2 r 144di 55467-9 5" 1/2" ah* x = 3/8 h 154hk 55468-6 p 164pk 55469-3 r 144di 55470-9 6" 1/2" ah* x = 3/8 h 154hk 55471-6 p 164pk 55472-3 r 144di 55473-0 * arbor hole is made to customer spec. please specify on order. ** h=hybrid p=polyimide r=resin 3m ? fluting wheel shape 1a1 dimensions d t ah* grade bond** prod id upc ( 051141-) min./ case diamond abrasive 1a1 4" 1/4" ah* x = 3/8 d220 h 650hj 31270-5 1 p 665pk 54806-7 r 654dj 31288-0 4" 3/8" ah* x = 3/8 h 650hj 31273-6 p 665pk 54809-8 r 654dj 31291-0 4" 1/2" ah* x = 3/8 h 650hj 31267-5 p 665pk 54803-6 r 654dj 31285-9 5" 1/4" ah* x = 3/8 h 650hj 31279-8 p 665pk 54823-4 r 654dj 31297-2 5" 3/8" ah* x = 3/8 h 650hj 31282-8 p 665pk 54828-9 r 654dj 54800-5 * arbor hole is made to customer spec. please specify on order. ** h=hybrid p=polyimide r=resin d t x ah the wheels listed in this catalog are in stock and intended as a general starting point for the application indicated. these wheels are recommended for wet applications. for dry applications or wheel confgurations/grades not listed here, please contact your 3m customer service representative at 1-800-736-2500. 2-day shipping on stock wheels within the u.s.! low high form retention cut rate 654dj 144di 665pk 164pk 650hj 154hk flute grinding flutes are the helical or straight grooves in the body of the tool. this provides a pathway to permit the removal of chips, and to allow coolants to reach the cutting surface.
superabrasive wheels 80 3m ? fluting wheel shape 1v1 dimensions d t ah* grade bond** prod id upc ( 051141-) min./ case diamond abrasive 1v1 4" 1/4" ah* x = 3/8 v = 10 d220 h 650hj 31268-2 1 p 665pk 54804-3 r 654dj 31286-6 4" 1/4" ah* x = 3/8 v = 20 h 650hj 31269-9 p 665pk 54805-0 r 654dj 31287-3 4" 3/8" ah* x = 3/8 v = 10 h 650hj 31271-2 p 665pk 54807-4 r 654dj 31289-7 4" 3/8" ah* x = 3/8 v = 20 h 650hj 31272-9 p 665pk 54808-1 r 654dj 31290-3 4" 1/2" ah* x = 3/8 v = 10 h 650hj 31265-1 p 665pk 54801-2 r 654dj 31283-5 4" 1/2" ah* x = 3/8 v = 20 h 650hj 31266-8 p 665pk 54802-9 r 654dj 31284-2 5" 1/4" ah* x = 3/8 v = 10 h 650hj 31277-4 p 665pk 54821-0 r 654dj 31295-8 5" 1/4" ah* x = 3/8 v = 20 h 650hj 31278-1 p 665pk 54822-7 r 654dj 31296-5 * arbor hole is made to customer spec. please specify on order. ** h=hybrid p=polyimide r=resin 3m ? fluting wheels (cont.) 3m ? fluting wheel shape 1v1 (cont.) dimensions d t ah* grade bond** prod id upc ( 051141-) min./ case diamond abrasive 1v1 (cont.) 5" 3/8" ah* x = 3/8 v = 10 d220 h 650hj 31280-4 1 p 665pk 54826-5 r 654dj 31298-9 5" 3/8" ah* x = 3/8 v = 20 h 650hj 31281-1 p 665pk 54827-2 r 654dj 31299-6 5" 1/2" ah* x = 3/8 v = 10 h 650hj 31274-3 p 665pk 54818-0 r 654dj 31292-7 5" 1/2" ah* x = 3/8 v = 20 h 650hj 31275-0 p 665pk 54819-7 r 654dj 31293-4 5" 3/4" ah* x = 3/8 v = 10 h 650hj 54919-4 p 665pk 54920-0 r 654dj 54921-7 cbn abrasive 1v1 4" 1/2" ah* x = 3/8 v ? = 0C20 b180 h 154hk 55474-7 1 p 164pk 55475-4 r 144di 55476-1 5" 1/2" ah* x = 3/8 v ? = 0C20 h 154hk 55477-8 p 164pk 55478-5 r 144di 55479-2 6" 1/2" ah* x = 3/8 v ? = 0C20 h 154hk 55480-8 p 164pk 55481-5 r 144di 55482-2 * arbor hole is made to customer spec. please specify on order. ** h=hybrid p=polyimide r=resin d t x ah v v=angle 2-day shipping on stock wheels within the u.s.!
wheel performance characteristics ? less form retention ? shorter production runs ? free cutting ? fast cutting ? best form retention ? close tolerances ? long wheel life ? long production runs ? slower cut rate 195dm 695dm 154pl 164hk 686hn 675pm high low 665hl f o r m r e t e n t i o n c u t r a t e high low 3m ? superabrasive wheels are available in a variety of constructions, each with its own unique characteristics. choose the 3m wheel with the best balance of form retention and cut rate for your application. superabrasive wheels 81 3m ? primary and secondary relief wheels 3m ? primary and secondary relief wheel shape 11v9 dimensions d t ah* grade bond** prod id upc ( 051141-) min./ case diamond abrasive 11v9 3-3/4" 1-1/2" ah* x = 1/8 u = 3/8 d220 h 686hn 54864-7 1 p 675pm 54837-1 r 695dm 54869-2 d280 h 686hn 54865-4 p 675pm 54838-8 r 695dm 54870-8 d320 h 686hn 54866-1 p 675pm 54839-5 r 695dm 54871-5 d400 h 686hn 54867-8 p 675pm 54840-1 r 695dm 54872-2 5" 1-3/4" ah* x = 1/8 u = 7/16 d220 h 686hn 54927-9 d320 h 686hn 54868-5 p 675pm 54855-5 r 695dm 54887-6 cbn abrasive 11v9 3-3/4" 1-1/2" ah* x = 1/8 u = 3/8 b220 h 164hk 31244-6 1 p 154pl 31233-0 r 195dm 31254-5 5" 1-3/4" ah* x = 1/8 u = 7/16 h 164hk 31251-4 p 154pl 31239-2 r 195dm 31261-3 * arbor hole is made to customer spec. please specify on order. ** h=hybrid p=polyimide r=resin d t 70 ah x u 2-day shipping on stock wheels within the u.s.! the wheels listed in this catalog are in stock and intended as a general starting point for the application indicated. these wheels are recommended for wet applications. for dry applications or wheel confgurations/grades not listed here, please contact your 3m customer service representative at 1-800-736-2500. primary and secondary relief grinding cutting edges are typically relieved to enhance chip clearance. primary relief involves removing material directly behind the cutting edge. for secondary relief, a slight bevel is ground next to the primary relief.
wheel performance characteristics ? less form retention ? shorter production runs ? free cutting ? fast cutting ? best form retention ? close tolerances ? long wheel life ? long production runs ? slower cut rate 195dm 695dm 154pl 164hk 686hn 675pm high low 665hl f o r m r e t e n t i o n c u t r a t e high low 3m ? superabrasive wheels are available in a variety of constructions, each with its own unique characteristics. choose the 3m wheel with the best balance of form retention and cut rate for your application. superabrasive wheels 82 3m ? primary and secondary relief wheels (cont.) 3m ? primary and secondary relief wheel shape 12v9 ? can also be used for gashing. (see page 83 for additional gashing wheels) dimensions d t ah* grade bond** prod id upc ( 051141-) min./ case diamond abrasive 12v9 4" 3/4" ah* x = 1/8; u = 3/8 s = 30 d320 h 665hl 54814-2 1 p 675pm 54847-0 r 695dm 54879-1 4" 3/4" ah* x = 1/8; u = 3/8 s = 45 h 665hl 54813-5 p 675pm 54846-3 r 695dm 54878-4 5" 3/4" ah* x = 1/8; u = 3/8 s = 30 h 665hl 54831-9 p 675pm 54856-2 r 695dm 54888-3 5" 3/4" ah* x = 1/8; u = 3/8 s = 45 h 665hl 54832-6 p 675pm 54857-9 r 695dm 54889-0 cbn abrasive 12v9 4" 3/4" ah* x = 1/8; u = 3/8 s = 30 b220 h 164hk 31250-7 1 p 154pl 31236-1 r 195dm 31258-3 4" 3/4" ah* x = 1/8; u = 3/8 s = 45 r 195dm 31257-6 5" 3/4" ah* x = 1/8; u = 3/8 s = 30 h 164hk 31252-1 p 154pl 31240-8 r 195dm 31262-0 5" 3/4" ah* x = 1/8; u = 3/8 s = 45 h 164hk 31253-8 p 154pl 31241-5 r 195dm 31263-7 * arbor hole is made to customer spec. please specify on order. ** h=hybrid p=polyimide r=resin ah t d u s x 3m ? primary and secondary relief wheel shape 11v5 ? can also be used for gashing. (see page 83 for additional gashing wheels) dimensions d t ah* grade bond** prod id upc ( 051141-) min./ case diamond 11v5 4" 1-1/2" ah* x = 1/4; u = 1/4 v = 30 d320 h 665hl 54895-1 1 p 675pm 54894-4 r 695dm 54893-7 * arbor hole is made to customer spec. please specify on order. ** h=hybrid p=polyimide r=resin d u ah 70 v x t v= angle 2-day shipping on stock wheels within the u.s.!
superabrasive wheels 83 3m ? gashing wheel shape 1v1 (cont.) dimensions d t ah* grade bond** prod id upc ( 051141-) min./ case cbn abrasive 1v1 4 3/8 ah* x = 3/8 v= 30 b220 p 154pl 31237-8 1 r 195dm 31259-0 4 3/8 ah* x = 3/8 v = 45 p 154pl 31238-5 r 195dm 31260-6 5 3/8 ah* x = 3/8 v = 30 p 154pl 31242-2 5 3/8 ah* x = 3/8 v = 45 p 154pl 31243-9 r 195dm 31264-4 * arbor hole is made to customer spec. please specify on order. ** h=hybrid p=polyimide r=resin 3m ? gashing wheels 3m ? gashing wheel shape 1v1 ? wheel shapes 12v9 and 11v5 are also commonly used for gashing. (see page 82) dimensions d t ah* grade bond** prod id upc ( 051141-) min./ case diamond abrasive 1v1 4 1/4 ah* x = 3/8 v = 30 d280 h 665hl 54810-4 1 p 675pm 54842-5 r 695dm 54875-3 4 3/8 ah* x = 3/8 v =20 d320 h 665hl 54815-9 p 675pm 54848-7 r 695dm 54880-7 4 3/8 ah* x = 3/8 v= 30 d320 h 665hl 54816-6 p 675pm 54849-4 r 695dm 54881-4 4 3/8 ah* x = 3/8 v = 45 h 665hl 54817-3 p 675pm 54850-0 r 695dm 54882-1 5 3/8 ah* x = 3/8 v = 20 h 665hl 54833-3 p 675pm 54858-6 r 695dm 54890-6 5 3/8 ah* x = 3/8 v = 30 h 665hl 54834-0 p 675pm 54859-3 r 695dm 54891-3 5 3/8 ah* x = 3/8 v = 45 h 665hl 54835-7 p 675pm 54860-9 r 695dm 54926-2 6 3/8 ah* x = 3/8 v = 30 d280 h 665hl 54836-4 p 675pm 54861-6 r 695dm 54892-0 * arbor hole is made to customer spec. please specify on order. ** h=hybrid p=polyimide r=resin 2-day shipping on stock wheels within the u.s.! d t x ah v v=angle the wheels listed in this catalog are in stock and intended as a general starting point for the application indicated. these wheels are recommended for wet applications. for dry applications or wheel confgurations/grades not listed here, please contact your 3m customer service representative at 1-800-736-2500. gashing gashing involves grinding a slot or notch along the cutting face to allow for chip fow.
superabrasive wheels 84 the wheels listed in this catalog are in stock and intended as a general starting point for the application indicated. many other wheel confgurations and grades are available. contact your 3m customer service representative at 1-800-736-2500. 3m ? wheels for end work 3m ? wheel for end work shape 11v2 dimensions d t ah* grade bond** prod id upc ( 051141-) min./ case diamond abrasive 11v2 4" 1-1/2" ah* x = 1/4 w = 1/4 d220 h 665hl 54862-3 1 p 675pm 54841-8 r 695dm 54873-9 d320 h 665hl 54863-0 p 675pm 54843-2 r 695dm 54876-0 cbn abrasive 11v2 4" 1-1/2" ah* x = 1/4 w = 1/4 b220 h 164hk 31248-4 1 p 154pl 31234-7 r 195dm 31255-2 * arbor hole is made to customer spec. please specify on order. ** h=hybrid p=polyimide r=resin 3m ? wheel for end work shape 11a2 dimensions d t ah* grade bond** prod id upc ( 051141-) min./ case diamond abrasive 11a2 4" 1-1/4" ah* x = 1/4 w = 1/4 d320 h 665hl 54811-1 1 p 675pm 54844-9 r 695dm 54922-4 d220 r 695dm 54874-6 4" 1-1/4" ah* x = 1/4 w = 3/8 d320 h 665hl 54812-8 p 675pm 54845-6 r 695dm 54877-7 5" 1-1/2" ah* x = 1/4 w = 1/4 d220 h 665hl 54824-1 p 675pm 54851-7 r 695dm 54883-8 d320 h 665hl 54829-6 p 675pm 54853-1 r 695dm 54885-2 5" 1-1/2" ah* x = 1/4 w = 3/8 d220 h 665hl 54825-8 p 675pm 54852-4 r 695dm 54884-5 d320 h 665hl 54830-2 p 675pm 54854-8 r 695dm 54886-9 cbn abrasive 11a2 4" 1-1/4" ah* x = 1/4 w = 1/4 b220 h 164hk 31249-1 p 154pl 31235-4 r 195dm 31256-9 4" 1-1/4" ah* x = 1/4 w = 3/8 b220 h 164hk 54923-1 p 154pl 54924-8 r 195dm 54925-5 * arbor hole is made to customer spec. please specify on order. ** h=hybrid p=polyimide r=resin ah d 70 t w x k ah 70 t d x w 2-day shipping on stock wheels within the u.s.! end work grinding a small clearance, or relief, angle on the face (tip) of the tool to reduce the contact area between the tool and workpiece.
3m ? dressing wheels ? silicon carbide dressing wheels are used to true and dress superabrasive grinding wheels ? ideally suited for use with 3m ? truing and dressing machines dimensions d t ah grade* prod id upc ( 051141-) min./ case silicon carbide abrasive 8" 1/2" 1-1/4" c80 400ti 54900-2 1 gc80 400ti 54906-4 8" 1/4" 1-1/4" c80 400ti 54901-9 400tk 54910-1 gc80 400ti 54907-1 400tg 54896-8 400th 54898-2 gc220 400ti 54905-7 8" 3/4" 1-1/4" c80 400ti 54902-6 400tk 54911-8 gc80 400ti 54908-8 8" 3/8" 1-1/4" c80 400ti 54903-3 400tk 54912-5 gc80 400th 54899-9 400tg 54897-5 400ti 54909-5 gc120 400ti 54904-0 * gc = green silicon carbide premium quality for longer life. c = black silicon carbide standard quality, softer construction provides freer and faster cut. superabrasive wheels 85 3m ? cut-off wheels 3m ? cut-off wheel shape 1a1r ? thin abrasive wheels used to trim blanks to length ? typically used on the cutting end of the tool when re-grinding and on the shank end when forming a blank dimensions d t ah grade prod id upc ( 051141-) min./ case diamond abrasive 1a1r 6" 0.35" 1-1/4" x = 1/4 d100 654bj 54951-4 1 654bk 30581-3 675bm 54952-1 d120 664bl 54953-8 d220 654bj 54954-5 2-day shipping on stock wheels within the u.s.! d t x ah 3m ? truing and dressing products 654bj 654bk 664bl 675bm high low c u t r a t e high low f o r m r e t e n t i o n ? less form retention ? shorter production runs ? free cutting ? fast cutting ? best form retention ? close tolerances ? long wheel life ? long production runs ? slower cut rate cut-off wheel performance characteristics cut-off wheels these thin abrasive wheels are used to trim blanks to length. they are typically used on the cutting end of the tool when re-grinding and on the shank end when forming a blank. 2-day shipping on stock wheels within the u.s.!
86 truing and dressing products 3m ? truing and dressing products (cont.) 3m ? single-point dressing tool premium ? a premium-quality natural diamond tip set in a steel shank ? non-resettable tool is more durable than the standard-quality version ? used on ceramic grain wheels and other diffcult-to-dress wheels shank d x l carat weight type upc ( 051115-) min./ case premium grade diamond abrasive; 45 angle 3/8" x 2" .33 ct tr3p6 20803-4 1 .50 ct tr5p6 20805-8 7/16" x 2" .33 ct tr3p7 20804-1 .50 ct tr5p7 20806-5 3m ? single-point dressing tool standard ? a standard-quality natural diamond tip set in a steel shank ? non-resettable, general purpose dresser shank d x l carat weight type upc ( 051115-) min./ case standard grade diamond abrasive; 45 angle 3/8" x 2" .25 ct tr2s6 20793-8 1 .33 ct tr3s6 20795-2 .50 ct tr5s6 20797-6 .75 ct tr7s6 20799-0 1.00 ct tr10s6 20801-0 7/16" x 2" .25 ct tr2s7 20794-5 .33 ct tr3s7 20796-9 .50 ct tr5s7 20798-3 .75 ct tr7s7 20800-3 1.00 ct tr10s7 20802-7 2-day shipping on stock wheels within the u.s.! 3m ? holding blocks ? used to mount 3m ? dsd truing tools for truing resin bond diamond and cbn wheels size application upc ( 051115-) min./ case for 1/4" or 3/8" diameter tools standard-duty 20821-8 1 for 3/8" or 1/2" diameter tools heavy-duty 20822-5 3m ? dressing sticks ? the most common means of dressing superabrasive wheels ? made of aluminum oxide or silicon carbide in popular sizes dimensions d t ah grade prod id upc (051141-)* min./ case aluminum oxide 1/2" 1/2" 4" ao500 200tk 54914-9 1 1/2" 1/2" 4" ao220 200th 20807-2* 3/4" 3/4" 4" ao150 200tg 20808-9* 3/4" 3/4" 4" ao500 200tk 54915-6 1" 1" 6" ao220 200th 20809-6* silicon carbide 1/2" 1/2" 3" sc320 200ti 54913-2 1 *order using prefx 051115. 3m ? dsd truing tools ? made of a 3m proprietary alloy ? excellent for truing resin bond diamond and cbn wheels ? will true straight ods, angles or sides of wheels ? must be used without coolant size d l application upc ( 051115-) min./ case 1/4" x 1-3/4" for use with 3m ? holding blocks 20817-1 1 3/8" x 1-3/4" 20818-8 1/2" x 2" 20819-5 5/8" x 2" for thru-feed truing and dressing of resin bond centerless wheels. 20820-1 2-day shipping on stock wheels within the u.s.!
3m ? impregnated grit dressing tool ? durable diamond grit in a metal bond matrix in straight or offset confgurations ? designed for common dressing applications size type upc ( 051141-) min./ case 15 angle 1/2" x 1/4" x 3/8" (7/16" shank dia.) 2a6e7 20781-5 1 3/4" x 1/4" x 5/16" (7/16" shank dia.) 1a6c7 20783-9 straight 1/2" x 1/4" x 3/8" (7/16" shank dia.) 2a6d7 20782-2 1 3/4" x 1/4" x 5/16" (7/16" shank dia.) 1a6a7 20784-6 cylindrical, straight round 1/4" x 3/8" (7/16" x 1-1/2" shank) 1r6j7 20786-0 1 3/8" x 1/2" (7/16" x 1-1/2" shank) 2r6k7 20787-7 3m ? multi-point dressing tool ? five or seven high-quality diamonds confgured in a single layer; metal bond matrix ? for dressing applications requiring the highest removal rates shank d x l type upc ( 051141-) min./ case 7/16" x 1" cl5s1 20788-4 1 cl7s1 20789-1 3m ? truing and dressing products (cont.) 3m ? multi-point diamond dresser ? contains whole natural diamonds ? used in severe dressing applications for heavy stock removal ? for straight dressing where single-point tools are not economical head diameter carat weight description upc ( 051115-) min./ case type jr. 1/2" 3 ct used on 7" and 8" wheels 28466-3 1 type 2 and 8 5/8" 6 ct used on a #2 cincinnati centerless, using an 8" wheel 28465-6 1 type cc 1" 6 ct used on centerless, cylindrical, and surface grinders, using wheels 10" in diameter or larger 28464-9 1 87 truing and dressing products
indl mesh-ansi fepa p trizact ? micron () scotch-brite ? grade* 12 p12 p16 16 p20 20 p24 24 p30 30 36 p36 40 p40 50 a500 p50 60 a400 p60 p80 a300 80 180 p100 a200 150 100 extra coarse p120 a160 120 120 coarse 100 p150 a130 150 a110 medium 180 p180 a100 80 220 p220 a90 a80 60 p240 a75 240 a65 fine p280 a60 50 p320 280 40 p360 320 very fine p400 a45 35 p500 30 360 p600 a30 400 p800 a25 22 20 500 p1000 a20 18 600 super fine p1200 a16 15 p1500 a10 800 12 p2000 10 1000 ultra fine 9 p2500 a7 1200 a6 a5 5 microfine 1500 a3 3 2000 1 abrasive grade comparison guide scotch-brite ? product guide measurement conversions: 1 inch = 25.4 millimeters 1 millimeter = 0.039370 inches 1 micron () = 0.000039 inches ansi american national standards institute fepa federation of european producers of abrasives products density number (prefix to mineral) mineral abbreviations (prefix to grade) aaluminum oxide mineral ssilicon carbide mineral ttalc mineral grade abbreviations ulf ultra fine sfn super fine vfn very fine fin fine medmedium crs coarse xcsextra coarse example: 2s med = soft density, silicon carbide mineral, medium grade 2s med soft hard soft density silicon carbide mineral medium grade * scotch-brite ? surface conditioning grade (generates finish approximately equivalent to indicated coated abrasive grade.) 2 4 6 7 8 9 10 11 88 abrasive grade reference chart
3m ? adhesive selection guide structural adhesives: each adhesive has high cohesive strength to bond high strength materials and potentially replace mechanical fasteners. non-structural adhesives metal to: 3m ? scotch-weld ? epoxy, acrylic adhesives 3m ? scotch-weld ? instant adhesives 3m ? scotch-weld ? adhesives 3m ? aerosol adhesives metal acrylics, epoxies ca40h 1357, 1099 (all), 1300 80, 90 epdm rubber ca40h 4799 rubber (except epdm) flexible 2-part epoxies ca40h 1300, 847 80, 90* glass and ceramics flexible 2-part epoxies 1357 80, 90 leather flexible 2-part epoxies 847 80 plastics (polyolefins) dp8005 90 plastics (abs, pvc, acrylic, etc.) dp8005 ca40h 1357 77, 80, 90 plastics (high performance nylon) dp460 ca40h 1099 (all) 77, 80, 90 plastics (flexible vinyl) flexible 2-part epoxies ca40h 1099 (all) 80 paper and cardboard 2-part epoxies 10 77 fabric, felt, cork and fibrous glass 2-part epoxies 74, 77, 80, 90 flexible foam (latex, urethane) 74, 90 rigid foam (beadboard, styrene) flexible 2-part epoxies rigid foam (urethane) flexible 2-part epoxies ca40h 1357, 5, 10 74, 80 note: the technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. final product selection should be made only after consideration of a variety of factors and evaluations of sample bonds. * produces a temporary bond on these materials. (1) adhesives must be force dried and bonded while warm. (2) for best results, preheat the substrate to a minimum of 120f (49c). (3) evaluate usage surface activator. 89 506711 506708 adhesives
3m ? aerosol adhesives only a fingers touch puts a job-matched formulation to work on paper, plastic, cardboard, foam, metal and more. 3m aerosol adhesives contain no methylene chloride, chlorofluorocarbons (cfcs), or 1,1,1-trichloroethane (methyl chloroform) and are california compliant. 399143 product number/description spray width bonding range surfaces one/ both (psi) shear 1 initial/ ultimate relative adhesion coverage sq. ft/ container 4 (typical) color size upc (021200-) qty./ case peel strength (piw) 2 temper- ature resitant 3 3m ? foamfast 74 spray adhesive 158977 ? fast tack with foam-tearing strength ? soft, non-dimpling glue line ? general upholstery foam bonding ? knife edge bonding, boxing, edge turning ? bonds flexible urethane or latex foam together or to wood, metal and plastic 1" C 4" variable n/r/ 15 min. 40/205 20 120f (49c) 260 inverted orange 24 fl. oz. can 07277-6 12 clear 50045-9 original formula orange 96316-2* 3m ? super 77 ? multipurpose spray adhesive 171591 ? fast, aggressive tack for bonding many lightweight materials ? high coverage ? low soak-in for long lasting bonds ? bonds gaskets in water pumps, and attaches insulation to sheet metal 1-1/2" C 4" fan 15 min./ 30 min. 25/160 15 110f (43c) 220 original formula 24 fl. oz. can 96315-5* 12 low mist 21210-9 3m ? rubber & vinyl 80 spray adhesive 171593 ? neoprene-based contact adhesive with plasticizer resistance ? adheres stainless steel panels, stiffeners, metal kick plates, leather and most supported vinyl, plastics, laminates, wood products and rubbers (except epdm) 3" n/r/ 1 hr. 50/400 35 200f (93c) 75/30 4 24 fl. oz. can 82618-4 6 3m ? hi-strength 90 spray adhesive 171595 ? high contact bond for decorative laminate ? adheres to polyethylene and polypropylene to wood, metal and more ? one minute dry time 1" C 4" variable n/r/ 15 min. 45/230 25 160f (71c) 100 24 fl. oz. can 07278-3 12 1 atd t.m. c-700: 1/8" birch veneer bonded to 1/8" birch veneer 2 atd t.m. c-449 3 atd t.m. c-483: 500 g load for 1 hr. at noted temperature 4 plastic laminate bonding @ 3-5 g/sq. ft. coverage 5 coverage based on container sizes 24 fluid ounce or 16 fluid ounce size cans n/r = not recommended 3m ? non-structural adhesives * not for sale in california adhesives 90
3m ? non-structural adhesives (cont.) 3m ? scotch-weld ? plastic adhesives: the scotch-weld ? adhesive is a tool designed adhesive designed to provide innovative answers to a wide variety of non-structural bonding problems. product number/description solids weight (approx.) flash point (closed cup) consis- tency color dry film applic- ation method bonding range overlap shear strength (psi) peel strength (psi) size upc (021200-) qty./ case 75f (24c) 180f (82c) 75f (24c) 3m ? scotch-weld ? high performance plastic adhesives 3m ? scotch-weld ? nitrile high performance plastic adhesive 1099 ? fast drying and heat curable ? resists weathering, water, oil, plasticizer migration, aliphatic fuels ? meets mil-a-13883b, type 1 and mmm-a-189c, class 2 ? a very strong plastic adhesive ? bonds most plastic and vinyl 678935 32% 0f (-18c) medium liquid light tan brush, flow up to 40 min. 1306 1,2 643 1,2 31 3 5 oz. tube 19808-3 36 3m ? scotch-weld ? nitrile high performance plastic adhesive 1099l 679850 ? lower viscosity ? sprayable version of 1099 adhesive 24% 0f (-18c) thin liquid tan spray, brush up to 20 min. 1306 1,2 643 1,2 31 3 5 gal. pail 22578-9 1 3m ? scotch-weld ? nitrile high performance industrial plastic adhesive 4693h ? clear, elastomeric adhesive ? exceptional adhesion to metal and plastic ? unique in its ability to bond hard-to-hold materials like polypropylene, polyethyl ene and high impact polystyrene 676284 36% 1f (-17c) medium liquid clear flow, brush up to 60 min. 22 3 5 oz. tube 30088-2 36 3m ? scotch-weld ? high performance rubber and gasket adhesives 3m ? scotch-weld ? nitrile high performance rubber and gasket adhesive 847 ? quick drying and flexible with fuel and oil resistance ? heat and solvent reactivatable ? curable with heat 55587 36% 0f (-18c) medium liquid brown flow, brush up to 15 min. 200 4 9 4 40 3 5 oz. tube 19718-5 36 1 quart 19721-5 12 3m ? scotch-weld ? neoprene high performance rubber and gasket adhesive 1300 ? high immediate strength ? fast-drying and heat resistant for rubber and metal 678931 37% -14f (-26c) medium liquid yellow flow, brush up to 12 min. 549 1 136 4 52 3 5 oz. tube 19868-7 36 3m ? scotch-weld ? industrial adhesive 3m ? scotch-weld ? industrial adhesive 4799 ? brushable paste consistency with low soak-in on porous surfaces ? can bond epdm rubber 678946 36% -14f (-26c) thin paste black brush, trowel up to 15 min. 28 3 5 oz. tube 21354-0 36 note: the technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. 1 aluminum to aluminum @ 0.1 inches/minute 2 bonds heat cured for 15 minutes @ 324f (162c), 150 psi 3 canvas to cold rolled steel @ 2.0 inches/minute separation rate 4 birch plywood to birch plywood @ 0.1 inches/minute separation rate adhesives 91
3m ? non-structural adhesives (cont.) 3m ? scotch-weld ? neoprene contact adhesives this line offers a wide range of choices for contact adhesives applications. select from bonding ranges, strengths, solids contents and solvent formulations to meet requirements for bonding laminate, foam and more. product number/ description solids weight (approx.) flash point (closed cup) consis- tency color dry film applic- ation method bonding range overlap shear strength (psi) peel strength (psi) color size upc (021200-) qty./ case 75f (24c) 180f (82c) 75f (24c) 3m ? scotch-weld ? neoprene contact adhesive 5 ? rapid strength buildup ? heat and creep resistant bond ? bonds many high pressure plastic laminates to metal and other surfaces 19% -14f (-26c) thin liquid green, light yellow spray 30 min. max. 482 1 65 1 19 2 green 5 gal. pail 21232-1 1 light yellow 20333-6 3m ? scotch-weld ? neoprene contact adhesive 10 ? similar performance to contact adhesive 5 ? brushable with higher coverage ? bonds aluminum, steel, rubber and other porous and non-porous materials to each other or to themselves 22% -14f (-26c) thin liquid light yellow brush, roller 30 min. max. 482 1 65 1 19 2 light yellow 1 quart 20272-8 12 1 gal. 20274-2 4 5 gal. pail 20276-6 1 3m ? scotch-weld ? neoprene high performance contact adhesive 1357 ? rapid buildup to a very high strength bond for metal ? resists heat and continuos load stress ? adheres well to metal, rubber, wood and glass 25% -14f (-26c) thin liquid gray- green, light yellow brush, spray 30 min. max. 536 1 199 1 42 2 gray green 5 oz. tube 19887-8 36 1 pint 19890-8 12 1 quart 19892-2 gray green 1 gal. 19894-6 4 light yellow 22586-4 gray green 5 gal. pail 19897-7 1 light yellow 64963-9 1 birch plywood to birch plywood @ 0.1 inches/minute separation rate 2 canvas to cold rolled steel @ 2.0 inches/minute separation rate 506707 506708 506711 adhesives 92
3m ? non-structural adhesives (cont.) 3m ? sealants help keep air, dirt, fuel, cold, heat or other elements in or out, youll find formulations from acrylic to polyurethane. product number/description solids weight (approx.) flash point (closed cup) consis- tency color (dry) applic- ation method cure or dry time service temperature range size upc (02100-) qty./ case 3m ? polyurethane sealant 540 ? polyurethane ? one-component ? moisture cures rapidly to flexible seal/bond for many plastics, metal, wood and more ? 250 psi tensile strength 90% 136f (58c) mastic gray hand or pressure caulk 24 hours (3/16" dia. bead) -40 to 194f (-40 to 90c) 10.5 oz. cartridge 41594-4 12 400ml sausage pack 96277-6 3m ? polyurethane adhesive sealant 560 ? similar to 540 but with 580 psi tensile strength ? may replace mechanical fasteners 90% 136f (58c) mastic gray hand or pressure caulk 24 hours (3/16" dia. bead) -40 to 194f (-40 to 90c) 1/10 gallon cartridge 41596-8 12 3m ? scotch-seal ? tamper proof sealant 1252 ? fire retardant seal ? resists oil, gasoline, water, jet fuel and fungus ? will not corrode metal ? tack-free in 20 seconds 70% 20f (-7c) thin paste white pressure- flow gun 24 hours (1/8" dia. bead) -20 to 250f (-29 to 121c) 5 oz. tube 20193-6 36 3m ? scotch-seal ? metal sealant 2084 ? seals metal to glass in windows and doors ? resists weather, water, oil and gasoline 46% 0f (-18c) heavy liquid alumi- num brush or flow 24 hours (1/8" dia. bead) -30 to 250f (-34 to 121c) 5 oz. tube 20227-8 36 note: the technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. 87965 product number/color 1 / description mix ratio (vol) b:a approx. 2 viscosity 75f (24c) (cps) approx. 3 worklife at 75f (24c) ave. t-peel 4 at 75f (24c) (piw) overlap shear strength 5 (psi) size upc (021200-) qty./ case -67f (-55c) 75f (24c) 180f (82c) epoxy 3m ? scotch-weld ? epoxy adhesive dp100 clear ? fast cure rigid epoxy ? 15C20 minute handling strength ? transparent when cured 1:1 13,000 4 min. 2 900 1500 300 1.7 fl. oz 22648-9 12 3m ? scotch-weld ? epoxy and acrylic adhesives used as an alternative for mechanical or fusion fastening due to its greater design latitude, cleaner lines, lighter weight, greater durability, less machining and often less cost. 3m ? structural adhesives 679348 adhesives 93
product number/color 1 / description mix ratio (vol) b:a approx. 2 viscosity 75f (24c) (cps) approx. 3 worklife at 75f (24c) ave. t-peel 4 at 75f (24c) (piw) overlap shear strength 5 (psi) size upc (021200-) qty./ case -67f (-55c) 75f (24c) 180f (82c) epoxy 3m ? scotch-weld ? epoxy adhesive dp100 plus 505232 ? higher peel and shear strength version of 178-100 1:1 8,500 4 min. 10 3000 3500 200 1.7 fl. oz. 87195-5 12 3m ? scotch-weld ? epoxy adhesive dp420 off-white 679363 ? medium worklife, toughened epoxy ? 1C2 hours handling strength ? tough, durable structural bonds ? very high performance, two-part epoxy adhesive ? great for bonding metal, plastic and wood 2:1 30,000 15 min. 50 4500 4500 1260 1.2 fl .oz. 82236-0 12 3m ? scotch-weld ? epoxy adhesive 2216 b/a gray 667274 ? long worklife flexible epoxy ? 8C12 hrs. handling strength ? bonds plastic, metal and other dissimilar materials 2:3 80,000 90 min. 25 2000 2500 400 quart kit 20356-5 6 3m ? scotch-weld ? epoxy dp460 off-white 679352 ? long worklife toughened epoxy ? 2C4 hours handling strength ? very high performance epoxy adhesive ? great for bonding a wide variety of materials with outstanding reliability and du rability 2:1 30,000 60 min. 60 4500 4500 700 1.25 fl. oz. 82225-4 12 acrylic 3m ? scotch-weld ? low odor acrylic adhesive dp810 678453 ? acrylic bonds many metals and plastics without surface prep ? fast strength buildup ? fully cured in 8 hours ? low odor ? high peel and shear strength on slightly oily steel, aluminum, glass and painted s urfaces 1:1 18,000 C 30,000 8C10 min. 30 1200 3600 500 1.7 fl. oz. 49077-4 (black) 12 31310-3 (tan) 3m ? scotch-weld ? low odor acrylic adhesive dp810ns clear 678388 ? non-sag version of dp810 ? 10-15 minute handling strength 1:1 90,000 C 95,000 8C10 min. 20 1200 4000 500 1.7 fl. oz. 49082-8 12 3m ? scotch-weld ? structural plastic adhesive dp8005 679365 ? 2-part acrylic adhesive bonds to polyethylene and polypropylene with no surfac e preparation ? tough bond strength to resist vibration and impact ? bonds most difficult-to-bond lse (low surface energy) plastics 10:1 27,500 2.5 C3 min. 16 2000 300 35ml 41547-0 (translucent) 12 45167-6 (black) note: the technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. 1 color is mixed if two-part product 2 brookfield viscometer viscosity values are typical values for the mixed product 3 the time during which an adhesive will adequately wet-out on a substrate 4 180 peel tested on .030" aluminum per astm d 1876-61t 5 tested per astm d 1002-64 3m ? structural adhesives (cont.) adhesives 94
3m ? epx ? applicators & accessories mixing nozzle will perform to your requirements. with consistent air pressure for easy uniform application, the duo-pak cartridge will give you the flow rate needed. fast, convenient way to simultaneously meter, mix and apply two-part adhesives and potting compounds. system features handy duo-pak adhesive cartridges that snap quickly into the durable, lightweight epx applicator. a slight squeeze on the trigger advances the plunger into the cartridge. accurate measurement and the mixing nozzle provides thorough mixing and precise placement of material. ideal system for assembly, maintenance and in-field service. 3m ? structural adhesives (cont.) 189875 3m ? scotch-weld ? instant adhesive for speed and performance, youll find a product with the right combination of bond strength, cure time and viscosity. product number/ description base time 1 to handling strength (sec.) viscosity (cps) ave. t-peel 2 at 75f (24c) (piw) overlap shear strength 3 at 75f (24c) (psi) size upc (021200-) qty./ case steel alumi- num nitrile rubber neoprene rubber aps rigid pvc 3m ? scotch-weld ? instant adhesive ca40h ? better void filling capabilities ? good adhesion to aluminum, epdm, rubber and flexible vinyl ? good resistance to soap solutions and isopropyl alcohol 322427 ethyl 5C40 400C600 1C2 1500 1500 35* 55* 900* 1000* 1 oz. 21073-0 12 note: the technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. 1 the time it takes assembled parts to reach a strength where further handling and processing can take place. times will depend on surface to be bonded, temperature and humidity. 2 tested per astm d1876-61t 3 tested per astm d1002-64 * substrate failure 676239 product number/description size upc (021200-) qty./case 3m ? epx ? metal applicator #9470 with 2:1 plunger 50ml 21789-0 10 3m ? epx ? 50ml pneumatic applicator with 2:1 plunger 50ml 83528-5 1 3m ? epx ? plus ii applicator with 2:1 and 1:1 plunger (manual) 50ml 50004-6 10 3m ? epx ? plus ii square gold mixing nozzle 127mm 97331-4 36 3m ? epx ? mixing nozzle #9742 for 50ml applicator 50ml 21791-3 72 3m ? epx ? 2:1 plunger assembly for 50ml applicator 82314-5 10 adhesives 95
note: the technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. description product number typical use color typical viscosity (cps) temp. range (f) time to handling (sec.) full cure (hrs.) bottle size upc (051111-) qty./ case instant adhesives 3m ? scotch-weld ? metal instant adhesive mc100 ? optimum performance and high strength bonds on metal to metal ? bond galvanized, anodized, and other difficult-to-bond metals ? two standard viscosities ? markets/application ideas: costume jewelry, treated metals, plated metals and metal working mc100 low viscosity metal bonder clear 80 C120 -65 to 180 5 C20 24 1 oz. 91663-6 10 1 lb. upc (048011-) 1 62634-5 3m ? scotch-weld ? instant adhesives 3m ? scotch-weld ? anaerobic adhesives description product number typical use color typical viscosity (cps) temp. range (f) time to handling (min.) full cure (hrs.) bottle size upc (048011-) qty./ case threadlockers 3m ? scotch-weld ? threadlockers ? prevent vibration loosening ? seal against leakage and corrosion ? replaces wide variety of traditional and sometimes ineffective vibration proofing m ethods, reducing cost and increasing performance tl22 screwlocklow removal torque for small fasteners less than a 1/4" (6mm) (hand tool for removal) purple 1,200 -65 to 300 < 20 24 1ml 31541-1 ? 100 10ml 62601-7 10 250ml 62603-1 2 50ml 62602-4 10 tl42 nutlockmedium strength, general purpose (hand tool for removal) blue 1,200 -65 to 300 < 20 24 1ml 62604-8 10 10ml 62605-5 10 1l 25124-5 ? 1 250ml 62607-9 2 50ml 62606-2 10 tl72 high temperature studlock with gap filling for larger diameter coarse threaded parts (heat and hand tool for removal) red 7,000 -65 to 300 < 20 24 10ml 25133-7 ? 10 1l 25136-8 ? 1 250ml 25135-1 ? 2 50ml 25137-5 ? 10 tl90 penetrating adhesive for pre-assembled fasteners and porosity sealing of welds (heat and hand tool for removal) green 20 -65 to 300 < 20 24 10ml 62615-4 10 1l 25150-4 ? 1 250ml 62617-8 2 50ml 62616-1 10 ? order using prefix 051115 adhesives 96
note: the technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. 3m ? scotch-weld ? anaerobic adhesives (cont.) description product number typical use color typical viscosity (cps) temp. range (f) time to handling (min.) full cure (hrs.) bottle size upc (048011-) qty./ case retaining compounds ? used in the assembly of coaxial components such as bearings, gears, shafts bu shes, pulleys, cylinder liners and rotors ? increase load bearing characteristics of cylindrical joints, reducing assembly stres ses, assembly costs and preventing fretting and corrosion 3m ? scotch-weld ? general purpose retaining compound rt09 rt09 for tight tolerances and press fit augmentation green 125 -65 to 300 10 C30 24 10ml 62661-1 10 250ml 62663-5 2 50ml 62662-8 10 3m ? scotch-weld ? slip fit/slow cure retaining compound rt35 rt35* high strength for slip fits green 2,000 -65 to 300 10C60 24 10ml 62667-3 10 250ml 62669-7 2 50ml 62668-0 10 3m ? scotch-weld ? pressure fit/hi temperature retaining compound rt40 upc (051115-) rt40* secures all types and sizes of bearings, shafts and cylindrical parts green 600 -65 to 400 10 C15 24 250ml 25735-3 2 50ml 25734-6 10 *made to order. description product number typical use color typical viscosity (cps) temp. range (f) cured speed unprimed (primed) cured state size upc (048011-) qty./ case gasket maker adhesives ? create formed-in-place gaskets on flanges and housings to eliminates need for lar ge inventories of pre-cut gaskets ? will not relax or shrink ? exceptional pressure and solvent resistance 3m ? scotch-weld ? gasket maker gm15 gm15 general purpose; flexible to withstand vibration purple paste -65 to 300 1C12 hrs. (15 min. C 2 hrs.) flexible 250ml tube 62656-7 2 300ml cart. 62657-4 10 50ml tube 62655-0 3m ? scotch-weld ? gasket maker gm18 gm18 instant low pressure seal without a primer on mating aluminum flanges red paste -65 to 300 4 C24 hrs. (30 min.C 4 hrs.) flexible 300gm cart. 62660-4 10 50ml tube 62658-1 description product number typical use size upc (048011-) qty./ case anaerobic primers 3m ? scotch-weld ? anaerobic activator ac649 ac649 acetone-based green primer for inactive or very cold surfaces; 30 day part life for pre-application 2 fl. oz. bottle 62708-3 10 8 fl. oz. bottle 62709-0 4 1 gal. can 62707-6 1 adhesives 97
3m ? protective tapes ordering information 3m ? protective tapes are custom ordered products. please contact your local 3m authorized distributor or your 3m sales specialist for ordering information. for further assistance, call polymask corporation at 1-800-241-2031. how to use this selection guide: the 3m ? protective tape products selection guide is a quick reference of standard 3m ? protective tape products to help the user select appropriate tapes for consideration and evaluation in their applications. products are color-coded by product family for easy reference. it is essential that the user evaluate the 3m ? protective tape product to determine whether it is suitable for a particular purpose to meet the users expectation. many factors can affect the use and performance of a 3m ? protective tape product in a particular application: ? surface texture of substrate ? surface preparation of substrate (including use of solvents) ? method and conditions of tape application ? time and environmental conditions ? storage conditions tape number identification guide film thickness (nominal thickness in mils) exception: 25a10 - 25 = 2.5 mils film type 1 ldpe 4 polypropylene 6 polyester a co-extruded pe e co-extruded pe (carpet tape only) u translucent uv stable film w co-extruded pe - black/white 3w26x film color b blue c clear w white x black/white no letter clear adhesive type adhesives: tack level: 04, 05, 10 very low = vl 12, 14, 23, 42, 73 low = l 25, 26, 29, 43, 56, 58 moderate = m 67, 79, 82, 87, 88, 89 high = h 93ez, 95ez very high = vh total tape thickness 2.0 mils (0.05mm) 2.5 mils (0.06mm) 3.0 mils (0.08mm) black/white 3.0 mils (0.08mm) 4.0 mils (0.10mm) product number (color coded by tape family) 2a04 2a05 2a10 2a12 2a25 2a26 2a29 2a87 2au23b/uv 2au26b/uv 25a10 25a12 25a25 25a26 25a29 25a87 25a88 25a89 25m26x 3104 3105 3110 3112 3125 3126 3179 3187 31u23c/uv 31u26c/uv 3w25x 3w26x 3w29x 3w55x 4112 4125 4126 4179 4187 backing co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. pe pe pe pe pe pe pe pe pe pe pe pe co-ex. co-ex. pe pe pe pe pe pe pe tack level vl vl vl l m m m h l m vl l m m m h h m vl vl vl l m m h h l m m m m m l m m h h metals uncoated aluminum mill finished galvanized anodized specular anodized flat stainless steel #2b annealed #4 mill polished #8 mirrored #10 mirrored steel laser cuttable coated steel or aluminum embossed flat gloss matte bronze dissimilar metals 4022 tapes 98
protective tape product families polyethylene tapes ? better transparency ? good abrasion resistance ? cost effective uv tapes clear and blue ? outdoor uv resistance for up to 5 months for clear; up to 3 months for blue ? available in transparent and blue uv tapes co-extruded black/white ? enhanced outdoor uv resistance for up to 6 months co-extruded a tapes the best choice in a 3m ? protective tape ? excellent conformability ? enhanced abrasion and puncture resistance ? good heat resistance total tape thickness 2.0 mils (0.05mm) 2.5 mils (0.06mm) 3.0 mils (0.08mm) black/white 3.0 mils (0.08mm) 4.0 mils (0.10mm) product number (color coded by tape family) 2a04 2a05 2a10 2a12 2a25 2a26 2a29 2a87 2au23b/uv 2au26b/uv 25a10 25a12 25a25 25a26 25a29 25a87 25a88 25a89 25m26x 3104 3105 3110 3112 3125 3126 3179 3187 31u23c/uv 31u26c/uv 3w25x 3w26x 3w29x 3w55x 4112 4125 4126 4179 4187 backing co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. co-ex. pe pe pe pe pe pe pe pe pe pe pe pe co-ex. co-ex. pe pe pe pe pe pe pe tack level vl vl vl l m m m h l m vl l m m m h h m vl vl vl l m m h h l m m m m m l m m h h metals uncoated aluminum mill finished galvanized anodized specular anodized flat stainless steel #2b annealed #4 mill polished #8 mirrored #10 mirrored steel laser cuttable coated steel or aluminum embossed flat gloss matte bronze dissimilar metals 3989 tapes 99 4022
3m ? vhb ? tapes product number size upc (021200-) qty./ case 4941 62383 1/2" x 36 yds. 64886-1 18 3/4" x 36 yds. 64887-8 12 1" x 36 yds. 64888-5 9 4611 155467 1/2" x 36 yds. 56375-1 18 3/4" x 36 yds. 56002-6 12 1" x 36 yds. 56146-7 9 5952 485322 1/2" x 36 yds. 59967-5 18 1" x 36 yds. 56229-7 9 4945 518834 1/2" x 36 yds. 16961-8 18 3/4" x 36 yds. 16954-0 12 1" x 36 yds. 16955-7 9 4950 62382 1/2" x 36 yds. 18090-3 18 3/4" x 36 yds. 18091-0 12 1" x 36 yds. 18092-7 9 to evaluate how 3m ? vhb ? tapes can be used in your applications, contact your 3m sales specialist or call 1-866-279-1288. for over 30 years, engineers have been specifying 3m ? vhb ? tapes to permanently bond and seal many metals, plastics, and other surfaces for increased productivity, high strength, long term durability and improved appearance. 3m ? vhb ? tapes all-acrylic construction seals against moisture and most solvents, providing long-term resistance to uv and temperature cycles. the tapes unique foam acts as a shock absorber for outstanding impact resistance. unlike the stress points common to mechanical fasteners, 3m ? vhb ? tapes distribute the stress. you can use thinner, light-weight materials with less material fatigue. product number color temperature resistance short long 4941 (45 mils) gray 300f (149c) 200f (93c) conformable and plasticizer resistant. good adhesion to metals, plastics and plasticized vinyls. 4611 (45 mils) dark gray 450f (232c) 300f (149c) bonds to bare metal and holds parts together during the washes and high temperature bake of a powder paint cycle. used for hat channel and stiffeners. 5952 (45 mils) dark gray 300f (149c) 200f (93c) bonds to most liquid and powder painted surfaces, and abs blends, without the need to prime the surface first. 4945 (45 mils) white 300f (149c) 200f (93c) plasticizer resistant. high strength firm core. bonds to most painted substrates. good adhesion to substrates containing plasticizers. 4950 (45 mils) white 300f (149c) 200f (93c) bonds to most metals and high surface energy substrates. note: the technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. 360845 rivets 360844 welds 360843 183696 199234 183697 tapes 100 3m ? vhb ? tapes
class i masking tapes with best-in-class holding power for critical paint lines and clean removal on high valued products or processes. 2693 up to 325f (163c) 231 up to 300f (149c) 232 up to 250f (121c) class ii masking tapes with reliable masking and clean removal on surfaces for functional coatings or paints, splicing, and heavy duty maintenance. 2380 up to 325f (163c) 2364 up to 300f (149c) 234 up to 250f (121c) class iii masking tapes with clean removal for light duty bundling, attaching and labeling. 2307 up to 200f (93c) 200 up to 200f (93c) 2214 up to 150f (66c) ? what is your application? ? to what temperature will the tape be exposed during use? ? do you need maximum holding power during use? ? do you need maximum paint edge sharpness when the tape is removed? ? do you want to remove the tape without slivering and adhesive residue? 3m ? masking products product number/description backing/ adhesive total thickness mils (mm) temperature range f (c) size upc (021200-) qty./ case 3m ? masking products class i masking scotch ? premium high performance masking tape 2693 50862 ? designed for applications where very aggressive room temperature and high temperature holding is required ? excellent for multi-bake paint cycles tan mini-crepe paper/ rubber 8.5 (0.21) up to 325f (163c)* 24mm x 55m 37629-0 36 36mm x 55m 41121-2 24 48mm x 55m 37630-6 72mm x 55m 42979-8 12 scotch ? paint masking tape 231 86989 ? excellent for paint masking ? sticks at a touch and stays put ? tough and smooth high performance crepe paper tape ? all-purpose masking tape natural colored crepe paper/ rubber 7.6 (0.19) up to 300f (149c)* 24mm x 55m 03777-1 36 36mm x 55m 04111-2 24 48mm x 55m 04237-9 72mm x 55m 04936-1 12 scotch ? high performance masking tape 232 13373 ? excellent for paint masking ? sticks at a touch and stays put ? tough and smooth high performance crepe paper tape natural colored crepe paper/ rubber 6.3 (0.16) up to 250f (121c)* 24mm x 55m 02854-0 36 36mm x 55m 02855-7 24 48mm x 55m 04240-9 72mm x 55m 02858-8 12 note: the technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. * up to 30 minutes increasing holding power, line sharpness, and clean removal tapes 101 performance (30 minute bake)
product number/description backing/ adhesive total thickness mils (mm) temperature range f (c) size upc (021200-) qty./ case 3m ? masking products class ii masking scotch ? performance masking tape 2380 50860 ? designed for industrial paint masking applications ? helps assure a good paint line whether air drying or oven baking mini-crepe paper/ natural synthetic/ rubber blend 7.5 (0.19) up to 325f (163c)* 24mm x 55m 44583-5 36 36mm x 55m 44582-8 24 48mm x 55m 44581-1 72mm x 55m 44580-4 12 scotch ? performance masking tape 2364 50859 ? for general masking applications where good holding power and temperature performance is required ? designed for many industrial applications ? easy tearing and sliver resistance, controlled unwind, clear removal tan crepe paper/ natural synthetic/ rubber blend 6.5 (0.16) up to 300f (149c)* 24mm x 55m 43352-8 36 36mm x 55m 43353-5 24 48mm x 55m 43354-2 72mm x 55m 43355-9 12 scotch ? general purpose masking tape 234 169188 ? excellent control unwind for paint masking ? resists transfer and slivering ? conforms well natural colored crepe paper/ rubber 6.0 (0.15) up to 250f (121c)* 24mm x 55m 02982-0 36 36mm x 55m 02983-7 24 48mm x 55m 04244-7 72mm x 55m 02985-1 12 3m ? masking products class iii masking 3m ? masking tape 2307 86975 ? general purpose grade ? solvent-free construction; non-critical paint masking natural colored crepe paper/ rubber 5.2 (0.13) up to 200f (93c)** 12mm x 55m 71116-9 72 18mm x 55m 71117-6 48 24mm x 55m 71118-3 36 36mm x 55m 71119-0 24 48mm x 55m 71120-6 60mm x 55m 55672-2 16 72mm x 55m 71121-3 12 product number/description backing/ adhesive total thickness mils (mm) temperature range f (c) size upc (048011-) qty./ case 3m ? paper tape 200 13372 ? natural colored, 4.5 mils (0.11mm) crepe paper tape with rubber adhesive ? used for holding, bundling, sealing, non-critical masking, and a vast number of other jobs where a pressure sensitive tape is needed natural colored crepe paper/ rubber 4.4 (0.11) up to 200f (93c)* 12mm x 55m 53469-5 72 18mm x 55m 53464-0 48 24mm x 55m 53465-7 36 36mm x 55m 53470-1 24 48mm x 55m 53466-4 72mm x 55m 53467-1 12 note: the technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. * up to 30 minutes ** up to 1 hour 3m ? masking products (cont.) 102 tapes
product number/description backing/ adhesive total thickness mils (mm) temperature range f (c) size upc (021200-) qty./ case 3m ? masking products class iii masking 3m ? paper masking tape 2214 148594 ? economical, quality, general purpose paper tape with rubber adhesive ? use for bundling, sealing, holding and non-critical indoor jobs ? 5.3 mils pressure sensitive tape resists slivering natural colored crepe paper/ rubber 5.2 (0.13) up to 150f (66c)* 12mm x 55m 45587-2 72 18mm x 55m 26074-2 48 24mm x 55m 26075-9 36 36mm x 55m 26076-6 24 48mm x 55m 26077-3 72mm x 55m 26078-0 12 note: the technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. * up to 30 minutes 3m ? masking products (cont.) product number/description size upc (051131-) qty./case 3m ? masking products painting 3m ? scotchblok ? masking paper gold 12026 ? protects against dust contamination from its own paper fibers ? holds up well under wet sanding conditions ? excellent conformability ? no solvent penetration ? bake cycles up to 225f (107c) for 30 minutes ? gold 18" x 750' 06718-9 2 3m ? masking paper white 12029 ? for utility applications ? acceptable conformability ? 24 lbs. treated paper ? bake cycles up to 400f (204c) for 30 minutes ? white 18" x 750' 06539-0 2 3m ? masking products welding 3m ? welding and spark deflection paper 43640 ? flame retardant ? repositionable adhesive on one side ? formulated to protect vertical surfaces, glass and paint from welding spatter and grinding sparks ? easy to use roll form 24" x 150' 05916-0 2 note: the technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. 103 tapes
scotch ? high strength tapes bundling and reinforcing solutions 3m has developed a wide range of high strength tapes, resistant to abrasion, moisture and scuffing, for the bundling and reinforcing challenges faced in the industrial marketplace. applications for these high performance products can vary dramatically from tabbing the end lap of metal coils to stabilizing pallets to reinforcing large bulk containers or just a single carton. these tapes balance tensile strength and adhesive holding power, even under extreme conditions, providing secure, cost-effective solutions for a variety of strapping, bundling and reinforcing applications. product number/ description backing color backing reinforcement adhesive elongation at break tensile strength (lbs./in.) size upc (021200-) qty./ case coil tabbing scotch ? high performance filament tape 880nr ? excellent balance of high initial adhesion and long-term holding power to fiberb oard, metals, printed and painted surfaces including applications exposed to higher temperatures and/or lightly oiled surfaces ? applications include bundling of heavy or sharp objects such as tubing and rod s and tabbing the end lap of large metal coils 195276 clear scotchpar ? film polyester yarn natural rubber resin 19% 270 18mm x 55m 48445-2 48 24mm x 55m 48446-9 36 48mm x 55m 48448-3 24 scotch ? high performance filament tape 898nr ? formulated to provided balanced performance having both high adhesion and lon g term holding power 195278 clear scotchpar ? film polyester yarn natural rubber resin 3% 380 18mm x 55m 48450-6 48 24mm x 55m 48451-3 36 48mm x 55m 48453-7 24 scotch ? filament tape 8919 ? ideal for securing hinged appliance doors or parts during shipping and the end lap of steel or aluminum coils ? specially formulated adhesive to provide clean removal and stain resistance on certain substrates 195267 clear scotchpar ? film glass yarn natural rubber resin 3% 380 18mm x 55m 39875-9 48 24mm x 55m 39876-6 36 48mm x 55m 39878-0 24 note: the technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. coil tabbing ? 880nr ? 898nr ? 8919 94671 pipe bundling ? 880 ? 894 8551 104 tapes
scotch ? high strength tapes bundling and reinforcing solutions (cont.) product number/ description backing color backing reinforcement adhesive elongation at break tensile strength (lbs./in.) size upc (021200-) qty./ case pipe bundling scotch ? filament tape 880 ? high impact and cut resistance ? long term holding power to fiberboard, non-oily metals and printed and painted s urfaces 195275 clear scotchpro ? film polyester yarn synthetic rubber resin 19% 270 12mm x 55m 39842-1 72 18mm x 55m 39844-5 48 scotch ? filament tape 894 ? general purpose packaging tape ? when used in bundling, reinforcing or coil tabbing applications with high temper atures and/or oily surfaces, tests should be conducted to determine the tapes suitability 195271 black scotchpro ? film glass yarn synthetic rubber resin 4.5% 300 18mm x 55m 88131-2 48 note: the technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. scotch ? filament tape dispensers product number/description size upc (021200-) qty./case scotch ? filament tape dispenser h-120 63625 ? portable dispenser with durable metal construction for carton sealing ? accommodates filament tape up to 1" (24mm) for high volume applications with fewer stops ? quickly and easily refillable 1" 11041-2 48 scotch ? box sealing tape dispenser h-123 63604 ? lightweight, compact, hand-held dispenser ? for pressure sensitive tapes up to 72mm wide x 55m (3" wide x 60 yds.) on 3" cores ? sturdy metal construction for durable, long-life performance 3" 11102-0 6 scotch ? box sealing tape dispenser h-128 188797 ? durable, heavy-duty metal dispenser ? provides a quick and easy method of applying h-seal and center-seam closures of rscs ? lightweight steel construction ? adaptable for a variety of on-the-spot applications ? accommodates tapes up to 2" (48mm) wide on a 3" core 2" 06909-3 6 scotch ? definite length dispenser m-82 100370 ? heavy-duty dispenser ? handles multiple tape rolls simultaneously from 1/2" (12mm) to a maximum combined width of 4" (98mm) ? applications include definite tape lengths for box closure, holding, appliance and electronics reinforcing, strapping, or bundling, and lift-flap taping on basiliod containers 4" 18959-3 1 105 tapes
3m ? specialty tapes whether you need an acid-resistant tape for plating masking, a tape that will come off cleanly after high temperature powder coating or a tape with thermal conductivity, you can find it in 3m ? specialty tape solutions. product number/description color backing adhesive elongation at break tensile strength (lbs./in.) size upc (021200-) qty./ case 3m ? polyester tapes 8901/8902 ? use as a maskant with easy removal for powder coat painting ? polyester film that retains flexibility and thermal resistance and is abrasion, chemical and thermal resistant to help reduce failures due to cracking and backing deterioration ? silicone adhesive for higher heat resistance (up to 400f; 204c) than many other adhesives to help reduce failure due to softening, oozing and adhesive transfer 50873 8901 blue polyester silicone 115% 28 1" x 72 yds. 85764-5 36 2" x 72 yds. 85765-2 24 8902 130% 53 1" x 72 yds. 85766-9 36 2" x 72 yds. 85767-6 24 3m ? general purpose polyester tape 8951/8952 85697 ? designed to provide clean removal during hi temperature/hi pressure masking operations ? polyester film retains flexibility and thermal resistance to help reduce cracking ? abrasion, chemical and thermal resistance helps reduce backing deterioration ? hi heat resistant (up to 425f; 218c) silicone adhesive helps reduce failure due to softening, oozing and adhesive transfer 8951 blue polyester silicone 100% 30 1" x 72 yds. 48225-0 36 2" x 72 yds. 48227-4 24 8952 110% 55 1" x 72 yds. 48230-4 36 2" x 72 yds. 48232-8 24 3m ? polyester tape 8992 462002 ? silicone adhesive has high temperature properties to perform powder-coat masking, flash breaker and bag seeding applications ? polyester film is solvent, heat, abrasion and shrink resistant ? green color makes tape placement obvious for both application and removal ? thin backing leaves a sharp paint line 8992 dark green polyester silicone 83% 48 1" x 72 yds. 25736-0* 9 2" x 72 yds. 25759-9* 6 3m ? glass cloth tape 361 50863 ? for extreme temperatures ? 5.4 mil backing thickness ? can withstand intermittent temperatures up to 550f (288c) or higher, depending upon the type and duration of the heat source 361 white glass cloth silicone 10% 182 1" x 60 yds. 03017-8 36 2" x 60 yds. 04275-1 24 3m ? electroplating tape 470 51586 ? excellent resistance to most chemicals used in typical electroplating operations ? resists most common solvents care should be taken to avoid ketones, chlorinated hydrocarbons and esters found in lacquer thinners, degreasers, paint strippers, etc. which may cause the backing to swell or curl ? conformable ? can be qualified to meet federal specification hh-t-0025 (gsa-fss) 470 tan pigmented vinyl plastic rubber 180% 20 1" x 36 yds. 85616-7 36 2" x 36 yds. 85617-4 24 3m ? aluminum foil tape 425 495552 ? good candidate as a maskant in electroplating of aluminum because it will not contaminate the bath ? adhesion to steel: 47 oz./in. width ? an acrylic adhesive, combined with a durable aluminum backing, offers ideal properties for long serviceable life indoors and out ? aluminum backing provides excellent reflection of both heat and light 425 shiny silver dead soft aluminum acrylic 8% 30 1" x 60 yds. 60572-7 36 2" x 60 yds. 60574-1 24 3m ? lead foil tape 420/421 145295 ? can be die-cut into specific shapes ? very good conformability ? adhesion to steel: 45 oz./in. width ? good thermal properties and will perform over a wide variety of temperature conditions (-60 to 225f; -54 to 106c); use indoors or out ? electrically and thermally conductive 420 dark silver lead foil rubber (green) 12% 20 1" x 36 yds. 04923-1 9 2" x 36 yds. 03081-9 6 421 14% 15 1" x 36 yds. 04917-0 9 2" x 36 yds. 03195-3 6 *order using prefx 051115. 106 tapes
scotch ? box sealing tapes with scotch box sealing tapes, you have the flexibility to seal boxes in a wide range of environments for durable and secure closure in packing stations. the tape is tough enough to resist score-line breaking and center-seam splitting, even when subject to rough handling. features: strong backing with either pressure-sensitive hot melt synthetic rubber resin adhesive or acrylic adhesives for reliable closures. a variety of hand-held dispensers allow for quick and easy application. product number/description backing/ adhesive total thickness mils (mm) color size upc (021200-) qty./ case scotch ? box sealing tape 355 226785 ? used for demanding packaging applications ? considered water resistant as per astm d5570 ? adheres instantly to most surfaces, including cartons containing high levels of recycled content ? high edge tear and split resistance ? superior performance ensures reliable closures polyester film/ hot melt rubber-resin 3.43 (.09) clear 48mm x 50mm 72330-8 36 48mm x 914mm 72300-1 4 72mm x 50mm 72331-5 24 72mm x 914mm 72333-9 2 tan 48mm x 50mm 06651-9* 36 72mm x 50mm 72327-8 24 scotch ? box sealing tape 375 48050 ? excellent performance box sealing tape ? seals heavy, high-value, over-packed, or under-packed packages ? strong for demanding situations ? meets us postal regulations polypropylene/ synthetic rubber 3.1 (.079) clear 48mm x 50m 72406-0 36 48mm x 914mm 72408-4 6 72mm x 50m 72407-7 24 72mm x 914mm 72409-1 4 tan 48mm x 50m 72401-5 36 72mm x 50m 72402-2 24 scotch ? box sealing tape 373 226794 ? high performance packaging tape ? used for box sealing, splicing, recouperage and other demanding packaging applications ? heavy duty, conformable backing ? consistent pressure sensitive hot melt adhesive system ? time proven construction assures high performance in a wide range of environments and applications polypropylene/ synthetic rubber 2.5 (.064) clear 48mm x 50m 72368-1 36 48mm x 914mm 72377-3 6 48mm x 1500mm 72379-7 3 72mm x 50m 69605-3 24 48mm x 100m 73079-5 36 72mm x 100m 73080-1 24 72mm x 914mm 72378-0 4 tan 48mm x 50m 72359-9 36 72mm x 50m 72361-2 24 48mm x 100m 73081-8 36 72mm x 100m 73082-5 24 scotch ? box sealing tape 371 48050 ? seals single wall corrugated cartons or bundles a group reliably ? polypropylene backing for tear resistance ? pressure-sensitive rubber adhesive offers quick, moisture proof seal ? a good, tight, general purpose seal polypropylene/ synthetic rubber 1.9 (.048) clear 48mm x 50m 13679-5 36 72mm x 50m 19279-1 24 48mm x 100m 15873-5 36 48mm x 914mm 13681-8 6 48mm x 1500mm 61823-9 6 72mm x 100m 19280-7 24 72mm x 914mm 18198-6 4 72mm x 1500mm 62455-1 4 tan 48mm x 50m 14105-8 36 72mm x 50m 18197-9 24 48mm x 100m 15872-8 36 48mm x 914mm 14107-2 6 72mm x 100m 61525-2 24 *order using prefx 051131. 107 tapes
3m ? box sealing tape dispensers scotch ? box sealing tapes (cont.) product number/description backing/ adhesive total thickness mils (mm) color size upc (021200-) qty./ case scotch ? box sealing tape 311 195156 ? general purpose box sealing tape designed specifically for utility type applications on light to medium weight boxes ? adheres instantly to a variety of surfaces, even in colder and damper environments ? conformable backing ? edge tear and split resistant ? good aging in sunlight or fluorescent lighting polypropylene/ pressure sensitive acrylic 2.05 (.052) clear 48mm x 100mm 88292-0 36 48mm x 1500mm 69398-4 6 72mm x 100mm 69397-7 24 tartan ? general purpose box sealing tape 305 195155 ? general purpose packaging tape used for non-critical box sealing applications ? a conformable backing ? good closure for lightweight boxes exposed to minimal distribution hazards polypropylene/ pressure sensitive acrylic 1.8 (.046) clear 48mm x 100mm 39809-4 36 48mm x 914mm 39810-0 6 scotch ? cold temperature box sealing tape 3331 649689 ? ideal for applications at refrigeration temperatures or at room temperature with subsequent storage at low temperatures ? adheres to a wide variety of surfaces between 30C 40f (-1C 4c), secured closures maintained below 32f (0c) ? excellent tack at low temperatures polypropylene/ pressure sensitive hot melt rubber resin 1.8 (0.045) clear 48mm x 100mm 32173-3 36 48mm x 914mm 32174-0 6 72mm x 100mm 32175-7 24 72mm x 914mm 32176-4 4 scotch ? and tartan ? brand hand-held dispensers are designed for use with specially formulated 3m box sealing tapes for improved ease of use. product number/description size upc (021200-) qty./case scotch ? box sealing tape dispenser h122 196837 ? hand braking system lets you control the amount of tape you use ? popular, light, plastic, contoured hand held dispenser ? small and portable, yet allows you to dispense tape up to 2" wide on a 3" core 48mm (2") 06925-3 6 scotch ? low noise tape dispenser h150 196835 ? hand-held, roll-on, pistol-grip dispenser ? designed to reduce the noise of tape unwind during application ? sturdy, durable, and easy to load and operate ? metal and high-impact plastic construction ? includes mousetrap tape brake 48mm (2") 39518-5 6 scotch ? low noise tape dispenser h153 195182 ? same features as the h150 dispenser ? metal and high-impact plastic construction ? includes mousetrap tape brake 72mm (3") 39820-9 6 scotch ? box sealing tape dispenser h180 195186 ? hand held, portable and easy to use roll-on motion ? features an adjustable tape brake allowing control of tension and delivery ? dispenses tapes 2" wide and is constructed of plastic and metal 48mm (2") 19008-7 6 108 tapes
product number/description size upc (021200-) qty./case scotch ? box sealing tape dispenser h183 195177 ? recommended for center seam sealing of rsc boxes ? metal and high-impact plastic construction for durability and long-life performance ? hand-held dispenser features adjustable tape break 72mm (3") 61850-5 5 scotch ? box sealing tape dispenser h192 196838 ? tape tension can be controlled with tape roll break ? high impact plastic construction 48mm (2") 86512-1 6 tartan ? box sealing hand dispenser hb933 196847 ? seals cartons easily and secures a smooth, one-handed roll-on motion ? unique spring-loaded bar maintains constant tension during tape application ? for tape rolls up to 3" wide on a 3" core 72mm (3") 22922-0 6 3m ? duct tapes product number/description backing/ adhesive total thickness mils (mm) temperature range f (c) color size upc (021200-)* qty./ case class i clean removal duct tape 3m ? performance plus duct tape 8979 352555 ? removes cleanly from most opaque surfaces, leaving behind no sticky residue for up to six months ? indoors or outdoors, this tape stays on the job without deteriorating for up to twelve months ? water resistant and sunlight/uv resistant polyethylene film over cloth scrim/ natural and synthetic rubber 12.6 (0.33) up to 200f (93c) slate blue 24mm x 54.8m 048011-53922-5 48 48mm x 54.8m 56468-0 24 72mm x 54.8m 56469-7 12 96mm x 54.8m 56470-3 class ii heavy duty duct tape 3m ? multi-purpose duct tape 3900 150221 ? polyethylene coated cloth with rubber adhesive ? general purpose duct tape ? good choice for general maintenance, wrapping, sealing and protecting polycoated cloth/ rubber 7.7 (.020) up to 200f (93c) silver 48mm x 54.8m 051131-06976-3 24 black 49833-6 yellow 49828-2 class iii utility duct tape 3m ? vinyl duct tape 3903 69452 ? embossed vinyl film coated with rubber adhesive ? designed for general sealing, color coding, masking, wrapping and bundling, protecting and other light duty applications where easy unwind, easy tear and less adhesive transfer are important embossed vinyl/ rubber 6.3 (0.16) up to 250f (121c) gray 2" x 50 yds. upc (051131-)* 24 06984-8 black 06995-4 yellow 06982-4 * use this prefx unless otherwise noted. note: the technical information and data on these pages should be considered representative or typical only and should not be used for specification purposes. 3m ? box sealing tape dispensers (cont.) 109 tapes
3m ? particulate respirators safety products important: before use of these respiratory protection products, a written respiratory protection program must be implemented, meeting all the requirements of osha 29 cfr 1910.134 such as training, fit testing, medical evaluation and applicable osha substance specific standards. please note: all products contain advanced electret media, noseclip and two straps. 44841 110 particulate respirator 3m ? particulate respirator suggested application nose foam 3m ? cool flow ? valve braided comfort strap carbon media nose- clip welding web adj. straps individual additional features upc (051131-) qty./ case dusty conditions 8200, n95 grinding, sanding, sweeping, other dusty operations s patented filter media 91913-1 160 4893 8210, n95 grinding, bagging, sanding, sweeping, other dusty operations s upc (051138-) 160 46457-3 185016 8210plus, n95 s 52924-8 4900 8271, p95 grinding, machining, sanding, sweeping, other dusty/hot/oily operations m patented filter media, faceseal 54285-1 80 4899 8511, n95 grinding, bagging, sanding, sweeping, other hot/dusty operations m patented filter media, soft inner materials 54343-8 670003 9105, n95 grinding, bagging, sanding, sweeping, sawing, other hot/ dusty operations a flat fold design, two sizes available, v-shaped pleats flex with mouth movement upc (051131-) 400 17397-7 670003 9105s, n95 a 17394-6 12411 9210, n95 grinding, bagging, sanding, sweeping, other hot/dusty operations s patented filter media, individual packaging, collapse resistant 37021-5 240 12412 9211, n95 s 37022-2 120 welding and metal pouring 4894 8212, n95 welding, torch cutting, brazing, soldering, metal pouring s patented filter media, faceseal, cake resistant media upc (051138-) 80 54141-0 4895 8214, n95 welding, torch cutting, brazing, soldering, metal pouring, stainless, galvanized ov* oz** s 66192-7 424889 8512, n95 welding, soldering and other applications where metal fumes are present including ozone** and nuisance level organic vapors* s 66298-6 424896 8514, n95 s 66299-3 * ov: 3m recommended for relief against nuisance levels of organic vapors. nuisance level refers to concentrations not exceeding the osha pel or applicable government exposure limits, whichever is lower. ** oz: 3m recommended for ozone protection up to 10 times the osha pel or applicable government occupational exposure limits, whichever is lower. not niosh approved for use against ozone. s = standard noseclip m = m-noseclip a = adjustable noseclip see warning on page 122
technologies cool flow ? exhalation valve. proprietary one-way valve for easy exhalation and cool, dry comfort. advanced electret media. electrostatically charged microfibers help make breathing easier and cooler. adjustable buckle straps. a single tug helps provide a comfortable, secure fit. m-noseclip. adjusts easily for fewer pressure points and greater comfort. carbon filter material. carbon layers remove many nuisance level odors* for greater wearer comfort. p-series filter. featuring advanced electret media, appropriate for prolonged use in oil and non-oil containing environments. faceseal. soft and secure, conforms closely to face for long-lasting comfort. cake-resistant filter media. specially designed filter layers for welding provide longer respirator life and easier breathing. compatibility. accommodates a wide range of safety equipment, including eye and hearing protection. * nuisance level odors refers to concentrations not exceeding the osha pel or other applicable government exposure limits, whichever is lower. 3m ? particulate respirators (cont.) particulate respirator 3m ? particulate respirator suggested application nose foam 3m ? cool flow ? valve braided comfort strap carbon media nose- clip welding web individual additional features upc (051131-) qty./ case welding and metal pouring (continued) 50662 8515, n95 welding, torch cutting, brazing, soldering m patented filter media 07189-1 80 nuisance level odor 8246, r95 aluminum, smelting, paper processing, brewing operations, glass etching, chemical processing ag ? s 54357-5 120 4899 8247, r95 foundry operations, undercoating, lab settings, agriculture, petrochemical processing ov* s 54358-2 354406 8516, n95 aluminum, smelting, paper processing, brewing operations, glass etching, chemical processing ag ? m softer inner materials 66392-1 80 4903 8576, p95 ag ? m 54370-4 4905 8577, p95 foundry operations, undercoating, lab settings, agriculture, petrochemical processing ov* m 54371-1 * ov: 3m recommended for relief against nuisance levels of organic vapors. nuisance level refers to concentrations not exceeding the osha pel or applicable government exposure limits, whichever is lower. ** oz: 3m recommended for ozone protection up to 10 times the osha pel or applicable government occupational exposure limit safety products 111 see warning on page 122
3m ? full and half facepiece reusable respirators respirator and filters provide an easy-to-use, comfortable, wide range of respiratory protection. applications: use in a variety of applications including painting, welding, metalworking and auto manufacturing (when used with appropriate cartridges, filters or supplied air). 1. choose facepiece half facepiece 5000 series 6000 series 7500 series features and benefts features and benefts features and benefts ? singleuse respirator: cartridges are permanently attached ? m ade from soft, lightweight thermoplastic elastomer ? noongoingmaintenance necessary ? resealable storage baghelpskeep respirator clean between uses ? lowprofledesignprovideswiderfeldofvisionand greater comfort while wearing goggles or glasses ? forconvenienceand simplicity, some respirator assemblies come with 3m ? filters p95 along with 3m ? filter retainers 501 ? m ade from soft, lightweight thermoplastic elastomer ? easytoadjusthead straps ? suppliedwith reclosable storage bag ? sweptbackdesignimprovesbalanceandvisibility ? niosh approved for negativepressureairpurifying and positive pressure dual airline applications ? canbeusedwith3m ? filters and cartridges or 3m ? dual airline system ? available withastandardordrop-downheadharness option. drop-down model allows wearers to lower the respirator without removing hard hat or faceshield. ? m ade from soft, resilient silicone and heat resistant plastics ? uniqueheadharness design gives to the user the option of wearing the respirator in traditional or drop-down mode ? 3m ? cool flow ? exhalation valve makes breathing easier, and helps reduce heat and moisture buildup in the facepiece and provides cool, dry comfort 158805 5061 4985 126155 note: when used in supplier air mode, employer must provide a minimum of grade d breathing air in accordance with osha requirements. product model size upc (051138-) qty./case 3m ? half facepiece respirator 5000 series 51p71 s 66068-5 12 52p71 m 66069-2 53p71 l 66070-8 product model size upc (051131-) qty./case 6000 series 6100 s 07024-5 24 6200 m 07025-2 6300 l 07026-9 7500 series 7501 s 37081-9 10 7502 m 37082-6 7503 l 37083-3 product model size upc (051131-) qty./case 3m ? full facepiece respirator 6000 series 6700 s 54145-8 4 6800 m 54146-5 6900 l 54159-5 product model size upc (051138-) qty./case 7800s series 7800s-s s 54257-3 1 7800s-m m 54258-0 7800s-l l 54259-7 product model size upc (051135-) qty./case ff-400 series ff-401 s 89418-2 4 ff-402 m 89421-2 ff-403 l 89424-3 safety products 112 full facepiece 6000 series 7800s series ff-400 series features and benefts features and benefts features and benefts ? s oft, silicone faceseal ? four strapsuspension for easydonninganddoffng ? bayonet attachment ? sweptbackcartridgedesign ? widefeldofvision ? meetsalltherequirements of ansi z87.1-2003 for high impact (z87+) ? integrated opticalcorrectionlimitsdistortionas you look from the left to the right ?directsexhaled breathandmoisturedownward ?smoothsurfaceallows forquickandeasycleaning ? available with negativepressureanddualairlinemodels ? d ouble-fange faceseal and six adjustable straps helpprovideasecureft ? madeofsilicone forincreased comfort and durability ? extra-large inhalation and exhalation valves help make breathing easier ? usewith3m ? filters and cartridges and/or a variety of powered and supplied air systems ? largelens featuring scotchgard ? protector ? passivespeaking diaphragm ? 3m ? cool flow ? valve makes breathing easier, helps reduce heat and moisture buildup in the facepiece, and provides cool, dry comfort ? durable, long-lastingheadharnessand comfortcradle ?soft, siliconenosecupandfaceseal 276370 276370 644335 see warning on page 122
safety products 113 * 3m recommended for relief against nuisance levels of organic vapors and acid gases. nuisance level organic vapor and acid gas refers to concentrations not exceeding osha pel or applicable government occupational exposure limits, whichever is lower. do not use for respiratory protection against acid gases or organic vapors (except hydrogen fuoride). ** reminder: these cartridges are approved for respiratory protection from hydrogen sulfde gas up to 10 times the permissible exposure limit (pel) with half facepiece respirators and full facepiece respirators when qualitatively ft tested, or up to less than 300 parts per million (ppm) with full facepiece respirators when quantitatively ft tested or according to specifc osha standards or applicable government regulations, whichever is lower. 300 ppm is the concentration considered immediately dangerous to life or health (idlh) for hydrogen sulfde. ? as recommended by the california department of pesticide regulation no. 01-009-methyl bromide field fumigation. 3m recommended for use against radioiodine and methylbromide. note: not niosh approved for methylbromide or radioiodine. 3m ? particulate filters and gas/vapor cartridges these flters and cartridges can be used interchangeably with 3m ? reusable respirators 6000, 7000 and ff-400 series. 2. choose filter/cartridge combination 3m ? particulate filters 2000 series ? lightweight and easy to breathe through ? assortment of flters available for a wide range of applications ? easier breathing through new 3-layer advanced electret filter media in 2200 series filters product number/description upc qty./case 2071 particulate filter, p95 051138- 54356-8 50 2076hf particulate filter, hydrogen fluoride/p95, with nuisance level acid gas relief* 051138- 54369-8 2078 particulate filter, p95 with nuisance level organic vapor/acid gas relief* 051138- 54368-1 2091 particulate filter, p100 051131- 07000-9 2096 particulate filter, p100, with nuisance level acid gas relief* 051138- 54295-5 2097 particulate filter, p100, with nuisance level organic vapor relief* 051131- 07184-6 2291 advanced particulate filter, p100 051131- 17170-6 2296 advanced particulate filter, p100, with nuisance level acid gas relief* 051131- 17171-3 2297 advanced particulate filter, p100, with nuisance level organic vapor relief* 051131- 17172-0 filter retainer and filter adapters for particles adapter 502*** retainer 501 adapter 603 100/case 100/case 16/case 051138- 21511-3 051138- 17668-1 051138- 54376-6 ***do not reuse. 3m ? particulate filter 7093, p100 ? unique, spring- loaded flter cover design simplifes negative pressure user seal checks ? swept-back design provides enhanced feld of view and greater comfort ? 7093c offers a lightweight, low profle design that combines p100 fltration with carbon-loaded features found in heavier combination cartridge products product number/description upc qty./case 7093 particulate filter, p100 051131- 52705-3 60 7093b particulate filter, p100, bulk 051131- 52706-0 144 7093c cartridge/filter, hydrogen fluoride, p100, with nuisance level organic vapor/ acid gas relief* 051131- 37173-1 60 particles filter retainer and filter adapter for gases and vapors adapter 502*** retainer 501 100/case 100/case 051138- 21511-3 051138- 17668-1 ***do not reuse. 3m ? gas/vapor cartridges 6000 series ? low-profle design helps maintain good feld of vision ? full range of cartridges to meet your needs product number/description upc qty./case 6001 cartridge, organic vapor 051138- 21674-5 30 pairs 6002 cartridge, acid gas** 051138- 28880-3 6003 cartridge, organic vapor/acid gas** 051138- 07047-4 6004 cartridge, ammonia/methylamine 051138- 28882-7 6005 cartridge, formaldehyde/organic vapor 051138- 28883-4 6006 cartridge, multi gas/vapor** 051138- 54186-1 6009 cartridge, mercury vapor or chlorine 051138- 29148-3 gases and vapors 3m ? combination cartridges/ p100 particulate filters 6000 series ? particulate flter is permanently attached to cartridge for easy, one-step assembly ? unique design for enhanced comfort and visibility product number/description upc qty./case 60921 cartridge/filter, organic vapor/p100 051138- 46465-8 30 pairs 60922 cartridge/filter, acid gas/p100** 051138- 46466-5 60923 cartridge/filter, organic vapor/acid gas/p100** 051138- 46467-2 60924 cartridge/filter, ammonia/methylamine/p100 051138- 46468-9 60925 cartridge/filter, formaldehyde/organic vapor/p100 051138- 46469-6 60926 cartridge/filter, multi-gas/vapor/p100** 051138- 54187-8 60928 cartridge/filter, organic vapor/acid gas/p100** ? 051138- 46470-2 60929 cartridge/filter, mercury vapor/chlorine gas/p100 051138- 46471-9 particles and vapors see warning on page 122
3m ? speedglas ? welding helmets safety products 114 see warning on page 122 3m ? speedglas ? 100 welding helmets ? auto-darkening filters (adf) 100v, 100s-10 and 100s-11 are good for stick, mig and most tig welding and offer excellent optical quality ? adf 100v has dark shades 8 C12 (shade 3 in the light state) and three user-selectable sensitivity levels for reliable arc detection ? adfs 100s-10 and 100s-11 have shades 3 and 10 or 11 respectively ? viewing area: 6.05 in 2 description product number shade upc qty./case black welding helmets 100 series welding helmet with adf 100v 07-0012-31bl 3, 8C12 051131- 49529-6 1 100 series welding helmet with adf 100s-10 07-0012-10bl 3, 10 051131- 37230-6 100 series welding helmet with adf 100s-11 07-0012-11bl 3, 11 051131- 37231-3 graphic welding helmets blazed 100 series welding helmet with adf 100v 07-0012-31bz 3, 8C12 051131- 37233-7 1 aces high 100 series welding helmet with adf 100v 07-0012-31ah 051131- 37237-5 american pride 100 series welding helmet with adf 100v 07-0012-31ap 051131- 37238-2 womens welding helmets steel eyes 100 series welding helmet with adf 100v 07-0012-31se 3, 8C12 051131- 37226-9 1 skull jewels 100 series welding helmet with adf 100v 07-0012-31sj 051131- 37227-6 steel rose 100 series welding helmet with adf 100v 07-0012-31sr 051131- 37228-3 wild-n-pink 100 series welding helmet with adf 100v 07-0012-31wp 051131- 37229-0 blazed aces high black american pride steel eyes skull jewels steel rose wild-n-pink 3m ? speedglas ? 9100 welding helmets ? radically-new design fundamentally changes not only how the user wears the helmet, but also how the welder experiences the helmets fit, stability and balance ? adfs 9100v, 9100x and 9100xx have dark shades 5, 8 C13 (shade 3 in the light state), sensitivity adjustment that allows use with all stick, mig and tig processes, as well as grinding and torch cutting modes ? viewing areas: 9100v = 6.05 in 2 ; 9100x = 9.12 in 2 ; 9100xx = 12.11 in 2 description product number shade upc qty./case 9100 series welding helmet with adf 9100v 06-0100-10 3, 5, 8C13 051135- 89353-1 1 9100 series welding helmet with side windows and adf 9100v 06-0100-10sw 051135- 89354-8 9100 series welding helmet with adf 9100x 06-0100-20 051131- 37172-9 9100 series welding helmet with side windows and adf 9100x 06-0100-20sw 051135- 89356-2 9100 series welding helmet with adf 9100xx 06-0100-30 051131- 37191-0 9100 series welding helmet with side windows and adf 9100xx 06-0100-30sw 051135- 89387-6
3m ? speedglas ? welding helmets (cont.) 115 safety products see warning on page 122 3m ? speedglas ? auto-darkening filters (adf) speedglas 100 super light (sl) speedglas 9100 viewing area 1.73" x 3.66" (44mm x 93mm) 1.68" x 3.57" (91mm x 43mm) 9100v: 1.8" x 3.7" (44mm x 93mm) 9100x: 2.1" x 4.2" (54mm x 107mm) 9100xx: 2.8" x 4.2" (73mm x 107mm) dark state options shades 8 C12 (variable) shade 10 or shade 11 (single shade) shades 8 C12 (variable) shades 5, 8C13 (variable) weight complete assembly (ounces) 15 (black helmet) 16 (graphic helmet) 13 9100v: 18.0 (18.9 w/sidewindows) 9100x: 18.3 (19.2 w/sidewindows) 9100xx: 19.2 (20.1 w/sidewindows) special modes none automatic on/off grinding, tacking*, lock-in dark state switching speed (milliseconds) 0.1 < 0.15 0.1 battery life (hours) 1,500 1,500 9100v: 2,800 9100x: 2,500 9100xx: 2,000 sensitivity modes 3 levels 4 levels 5 levels *patented feature only available on 3m ? speedglas ? 9100 series welding helmets. 3m ? speedglas ? sl (super light) welding helmet ? only 12.6 oz. (including filter) ? adf has variable shades 8 C12 and 4 sensitivity levels ? head suspension increases adjustability description product number shade upc qty./case sl welding helmet with adf 05-0013-41 3, 8C12 051131- 98564-3 1 3m ? speedglas ? 9100 fx welding helmets ? innovative wide-view grinding visor to give welders an all-in-one solution for more flexibilty, precision, and efficiency ? exceptionally clear, wide grinding visor offers a greater field of view in all directions, while a smooth flip-up pivot mechanism assures effortless transition from welding to grinding modes ? adfs 9100v, 9100x and 9100xx have dark shades 5, 8C13 (shade 3 in the light state), sensitivity adjustment that allows use with all stick, mig and tig processes, as well as grinding and torch cutting modes ? viewing areas: 9100v = 6.05 in 2 ; 9100x = 9.12 in 2 ; 9100xx = 12.11 in 2 description product number shade upc qty./case 9100 fx series welding helmet with side windows and adf 9100v 06-0600-10sw 3, 5, 8C13 051131- 49671-2 1 9100 fx series welding helmet with side windows and adf 9100x 06-0600-20sw 051131- 49673-6 9100 fx series welding helmet with side windows and adf 9100xx 06-0600-30sw 051131- 49675-0
hearing conservation 3m offers a wide variety of solutions to help reduce noise exposure. a full line of comfortable, easy-to-use hearing protectors, including earplugs, ear muffs, and banded hearing protectors are available from 3m. product number/description model upc (051138-) qty./case 3m ? foam earplug 1100 and 3m ? corded foam earplug 1110 247043 ? smoothdirtresistantsurfaceandtaperedshapefit the ear canal and provide added comfort and hygiene ?hypo-allergenicmaterial ?eachpackageiseasytodispense ?noisereductionrating:29db* ?availableincordedanduncordedversions 1100 (uncorded) 29008-0 1000 pairs 247035 1110 (corded) 29009-7 500 pairs product number/description model upc (93045-) qty./case 3m ? pistonz ? earplugs p1400 and 3m ? pistonz ? corded earplugs p1401 719583 ?instant-usenoneedtorolldown ? stemisstiffenoughforinsertion,yetdesignedtoflexsideways if impacted ?metallic-styleearplugtipswithultra-softfeelforalldaywear ?officiallylicensedhearingprotectionofnascar ? ?noisereductionrating:29db* ?availableincordedanduncordedversions p1400 (uncorded) 93401-7 400 pairs 609559 p1401 (corded) 93402-4 400 pairs product number/description model upc (80529-) qty./case 3m ? e-a-r ? classic ? uncorded earplugs 310-1001 706318 ? conformstotheshapeoftheearcanaltohelpcreate a comfortable, snug noise barrier ? pillowpakkeepsthesedisposableearplugsavailable, reusable and clean ? slow-recoveryearplugfoamisnon-flammableandmoistureresistant ?meetsansis3.19-1974;csaclassal ?noisereductionrating:29db* 310-1001 10000-6 2000 pairs 3m ? e-a-rsoft ? yellow neons ? ? noisereductionrating: 33 db* (highest nrr available) ?softfoamprovideslowpressurewithexcellentattenuation 312-1250 (uncorded) 12063-9 2000 pairs 311-1250 (corded) 11033-3 3m ? e-a-r ? ultrafit ? ?noisereductionrating:25db* ?flangeddesignforcomfortablefit ?conformstoshapeofear ?washable,promotesworkerhygiene ?norollingortouchingplugportionduringinsertion 340-4003 (uncorded) 40002-1 400 pairs 340-4004 (corded) 40003-8 340-4002 (corded w/case) 40001-4 200 pairs 3m ? e-a-r ? push-ins ? with grip rings ?shapedforcomfortandgrippedforfit ?noisereductionrating:30db* ?easyfitwithnorolldownrequired ?foamsoftenswithbodyheat ?gripringdesigntogentlyhugearcanal 318-1008 (uncorded) 18010-7 2000 pairs 318-1009 (corded) 18011-4 3m ? e-a-r ? push-ins ? ?easyfitwithnorolldownrequired ?noisereductionrating:28db* ?e-a-rform ? yellow foam tip for great comfort ?bluestemallowsforhygienicinsertionandremoval 318-1000 (uncorded) 18017-9 400 pairs 318-1001 (corded) 18017-9 * research suggests that many users will receive less noise reduction than indicated by the nrr due to variation in earplug fit and wearing time. it is recommended that the nrr be reduced by 50% for estimating the average amount of noise reduction provided. safety products 116 see warning on page 122
product number/description model upc (80529-) qty./case semi-insert hearing protectors 3m ? e-a-rflex ? banded hearing protector ?noisereductionrating:25db* ?highestnrrforasemi-insertinallthreepositions ?comfortable,lightweightalternativetoearmuffs ?bandhelpspreventlossandisgoodforintermittentuse 350-1001 (band w/tips) 50007-3 10/box 350-1002 (replacement tips) 50008-0 5 pair/pack 3m ? e-a-r ? one touch ? base and no waste funnel with classic ? and yellow neon ? plugs banded hearing protector ?nowastefunnelallowsuserstoreusebaseanddispenser ?onetouch ? base can be used as a table top unit or wall mounted ?easyaccessfortheuserfromallsides ?nowasteofpackagingforindividualearplugs 391-1000 (dispenser) 91000-1 1/box 391-1001 (classic ? replacement bottle) 91001-8 2000 pairs 391-1004 (yellow neon ? replacement bottle) 91004-9 product number/description model upc (93045-) qty./case 3m ? peltor ? optime ? 95 banded hearing protector 666471 ? idealagainsthigh-frequencynoisewithworkareas including machine shops and power tools ?ultralightwithliquid/foamfilledearcushions ?lowprofileearmuffandneckband ?nrr21db* h6a/v (headband style) 08061-5 10/case h6b/v (neckband style) 08062-2 h6p3e/v (helmet- attachment style) 08065-3 3m ? peltor ? optime ? 101 banded hearing protector 666478 ?excellentattenuationatlowandhighfrequencies ? enablessafeworkingenvironmentforlongerperiods of time, up to 101dba ?twolowmountingpointsprovidegreatcomfort ?h7a:nrr27db* ?h7b:nrr26db* ?h7p3e:nrr24db* h7a (headband style) 08071-4 10/case h7b (neckband style) 08072-1 h7p3e (helmet- attachment style) 08073-8 * research suggests that many users will receive less noise reduction than indicated by the nrr due to variation in earplug fit and wearing time. it is recommended that the nrr be reduced by 50% for estimating the average amount of noise reduction provided. hearing conservation (cont.) safety products 117 see warning on page 122 product number/description model upc (051131-) qty./case ? ledlightclearlyindicateswhennoiselevelsexceedapotentially hazardous threshold ? helpsidentifyareaswherehearingprotectionmayneedtobeworn ? cliptoashirtorjacket ni-100 17453-5 10 ?chargingcord ?soldseparately ni-chg 17475-9 3m ? noise indicator ni-100
product number/description model color upc (78371-) qty./case 3m ? virtua ? ap protective eyewear 665088 ?popularunisexstyling ?lightweight frame lessthan1oz. ? meetsansiz87.1-2010highimpact requirements standards ?contouredflexibletemplesforcomfortablefit ? high-wraplensesfitsnugagainsttheface, for wider viewing area. 11815- 00000-20 gray hard coat lens 11815-7 10/box 11816- 00000-20 light blue hard coat lens 11816-4 11817- 00000-20 amber hard coat lens 11817-1 11818- 00000-20 clear anti-fog lens 11818-8 11819- 00000-20 clear hard coat lens 11819-5 11847- 00000-20 indoor/outdoor mirror hard coat lens 11847-8 3m ? light vision ? 2 532063 ?ultra-bright,adjustableledlights ? long-lastingbatteriesprovideupto 50 hours of continuous use ?softnosebridgeandtempletips ? availableinreaderswiththreebifocal magnification strengths: +1.50, +2.00, +2.50 ?polycarbonatelensesabsorb99.9%uv ? meetstherequirementsofcsaz94.3-2007and the high impact requirements of ansi z87.1-2003 11476- 00000-10 gray frame/ clear anti-fog lens 62111-4 10/case 3m ? lexa ? protective eyewear ?extrawideviewingrangeandcontoureddesign ?lightweight,fullcoverageeyeprotection ? fullycustomizablewithmultiplelensoptions, three lens angles and four temple lengths ? meetsansiz87.1-2003andcsaz94.3-2007 15200- 00000-20 clear anti-fog lens/ black temple 62287-6 20/case 15250- 00000-20 minimizer ? lens/ black temple 62299-9 ? designedforworkerswhohavedifficultyreading small print or who are engaged in small detail work(13415:+1.5diopter;13416:+2.0diopter; 13417: +2.5 diopter) ?lightweight,fullcoveragedesign ?multiplelensoptions,anglesandtemplelengths ?meetsansiz87.1-2003andcsaz94.3-2007 13415- 00000-20 minimizer ? lens/ black temple 13415-7 13416- 00000-20 minimizer ? lens/ black temple 13416-4 13417- 00000-20 minimizer ? lens/ black temple 13417-1 3m ? bx ? dual protective eyewear 576927 ? sleek,contouredandfullyadjustablewith molded-in magnifying diopters on the upper andlowerlenses(11457:+1.5diopter;11458: +2.0diopter;11459:+2.5diopter) ?polycarbonatelensesabsorb99.9%uv ? meetstherequirementsofcsaz94.3-2007and the high impact requirements of ansi z87.1-2003 11457- 00000-20 silver/black frame/ clear anti-fog lens 11457-9 20/case 11458- 00000-20 silver/black frame/ clear anti-fog lens 11458-6 11459- 00000-20 silver/black frame/ clear anti-fog lens 11459-3 safety products 118 3m eye protection products help provide wearer comfort, safety and a fashionable look. they are available in several designs to meet the needs of a wide variety of people and conditions. protective eyewear see warning on page 122
3m ? sorbents 3m ? maintenance sorbents: fast acting, highly absorbent, easy to use and absorb almost any type of non-aggressive liquids such as oils, coolants, hydraulic fluids and water. its high fluid capacity means the need to change the sorbent is less frequent, saving on material, labor and disposal costs. 3m ? petroleum sorbents: sorbs oil and other petroleum-based liquids while repelling water. available in a variety of configurations to best suit your needs including: folded, pads, booms, pillows, sweeps, rolls and drum covers. product number/description model size upc (051138-) qty./case 3m ? maintenance sorbents folded m-fl550dd, high capacity 3835 ? easy-to-usesolutionforcleaningupspills,dripsandfluidleaks ? versatile:canbeusedinpillow,pad,rollorboomconfiguration ? scrimononesidetoincreasestrengthandhelpeliminatelinting ? dispensesfromacarrying/dispenserboxintheformofa continuous roll ? lesswaste:perforatedevery16inchessoyoucanselectthe length required ?absorbs31.5gallonspercase ?applicationsrangefrommaintenancetospillresponse m-fl550dd 5" x 50' 29071-9 3 rug m-rg36300e 3841 ?useinareaswherefootandvehicletrafficisaconcern ? willsorbnonaggressiveliquidswhileenduringthe punishment of being tread upon ?durableandversatile ? useinindustrialmaintenanceapplications ?absorbs32gallonsperrug m-rg36300e 36" x 300' 29002-3 1 mini-boom 3840 ? tube-likeshapeisidealforplacingaroundmachineryto contain spills and prevent leaks from spreading into adjacent work areas ? 3inchdiameterscrimontheoutsideoftheboomidentifies the use while containing particulate sorbent material designed for the application ?absorbs12gallonspercase m-mb304 3" x 4' 21526-7 12 m-mb308 3" x 8' 21527-4 6 3m ? petroleum sorbents pad hp-156, high capacity 6756 ? low-profiledesigncanbeeasilyplacedintightareas ? idealforcleaningupsmallspillsandwipingdown contaminated areas ? hasascrimononesidetoincreasestrengthandhelp eliminate linting ? convenientlysized,allowstheusertoquicklyspreadsorbent over and in the path of a spill ? canalsobeusedonaworksurfaceinanticipationofaspill or as a wipe ?absorbs37.5gallonsperbale hp-156 17" x 19" 28911-4 100 product number/description model size upc (021200-) qty./case pad t-151 6714 ? thishighlysorbentpadfeaturesalow-profiledesignforeasy placement in tight areas ? idealforcleaningupsmallspillsandwipingdown contaminated areas ?absorbs43.5gallonsperbale t-151 17" x 19" 16049-3 200 safety products 119 see warning on page 122
3m ? fall protection safety products 120 see warning on page 122 the height of confidence it is our mission at 3m to provide those responsible for the safety of workers at height with reliable fall arrest equipment. we offer the knowledge and support to help take the fear out of height. 3m ? elavation ? harness ? thepremium3m ? fall arrest harness ?premiumpadding ? intuitiveadjustmenthardware ? webdesignedforadditional abrasion resistance ? rubberprotectiveshield for label pack 3m ? ameba harness ? featurescomfort forming webbing ? non-elastichelicalyarn moves with wearers to assist comfort and mobility ? valuepaddingforadded comfort and moisture wicking ? laminatedsleevehelps protect label 3m ? safelight ? harness ? theeconomicalchoicein fall arrest harnesses ? qualityconstructionata value price ? brightcolorwebassists worker visibility on a jobsite model upc (78371-) qty./case model upc (78371-) qty./case model upc (78371-) qty./case 7512e 64010-8 1 1451q 63599-9 1 10950 00081-0 1 harnesses 725466 717841 725469 3m ? safeabsorb ? dual leg elast combo lanyard ? stretchesfrom 4C6feetto help reduce trip hazards ?310lbs.rated ? 3,600lbs.gate rated hardware ?integratedshockabsorber 3m ? adjustable lanyard w/rebar hooks ? versatileofferingoflengths and hardware for general use ?310lbs.rated ?3,600lbs.gateratedhardware ? meetsrequirementsoflatest ansi z359.13-2009 standards ?includesanexternalshockpack 3m ? safelight ? lanyard ? theeconomicalchoice in fall arrest lanyards ?310lbs.rated ? 3,600lbs.gateratedhardware ? meetsrequirementsofansi z359.1-2007 standards ? availableinlow-profileor external shock pack designs model upc (78371-) qty./case model upc (78371-) qty./case model upc (78371-) qty./case 4750/0241 01437-4 1 3251d-0241 00254-8 1 209512 00103-9 1 lanyards 725653 725644 725651 3m ? reload ? retractable lifeline ? canbeinspectedandserviced onsite by authorized technicians for lower maintenance costs ? clickingsoundprovides audible indication that pawls are functioning correctly ? 400lbs.maxcapacityforcable units;310lbs.forwebunits ? cableunitsrangefrom 23C50 feet, available in galvanized or stainless steel ? webunitsrangefrom7C23feet 3m ? thor ? galvanized cable lifeline ?durablealuminumhousing ? springcushioncableguidehelps reduce cable rewind damage ? swiveltophousingfor enhanced mobility ?310lbs.maxcapacity ? cableunitsrangefrom 10C30 feet, available in galvanized or stainless steel ?webunitsrangefrom7C50feet 3m ? retractable lifeline (g-series) ? versatileproductsuitable for multiple industries ? assembledintheu.s.a. from high quality materials ? ruggeddurabilityand lightweight design ?310lbs.maxcapacity ? cableunitsrangefrom 20C50 feet, available in galvanized or stainless steel ? web units range from 7C20 feet model upc (78371-) qty./case model upc (78371-) qty./case model upc (78371-) qty./case rec-23 01132-8 1 m-30 00359-0 1 gw-11 64164-8 1 self-retracting lanyards 725713 725714 725714
3m ? fall protection (cont.) safety products 121 see warning on page 122 3m ? safeclaw reusable concrete anchor ? triggermechanismallowsunittobeeasilyinserted and removed from pre-drilled poured concrete ? availablein5000lbs.(model4075)and 10,000 lbs. (model 4077) rated designs 3m ? reusable roof anchor ?hingedanchorforwoodandmetaldecking ?steeldesign ?fitsmostpitchangles ?appropriateforhorizontallifelineapplications model upc (78371-) qty./case 4075 01071-0 1 model upc (78371-) qty./case 4077 01162-5 4000 00050-6 1 3m ? beamwalk iii ?lightweightaluminumconstruction ?dualaxisswiveld-ringhelpsprevententaglement ? smoothsliding,non-chattering mobiliy across exposed i and h beams 3m ? industrial anchor ?permanentd-boltanchor ?includesnut,boltandwasherhardware model upc (78371-) qty./case model upc (78371-) qty./case 4650-3 62716-1 1 4005 00053-7 1 anchorage devices 725739 725740 725742 725751 725748 3m ? general fall protection kit ?designedforusewithrentallifts ? includes3m ? safelight ? harness (10910), 6-ft 3m ? safelight ? lanyard (209512) and tool bag for equipment storage ?canbepersonalizedwithacustomerlogo 3m ? roofing kit ? acompletepersonalfallarrest system in a bucket ? includes3m ? safelight ? harness (10910), 6-ft 3m ? safelight ? lanyard (209512), 3m ? reusable roof anchor (4000), 50-ft lifeline with attached rope grab (0221-50rg) and 5-gallon storage bucket model upc (78371-) qty./case model upc (78371-) qty./case 30500 00088-9 1 20058 00086-5 1 kits 712900 725765
safety products these eye and face protection products help provide limited eye and face protection. misuse or failure to follow warnings and instructions may result in serious potential injury, including blindness or death. for proper use, selection, and applications against flying particles, optical radiation and/or splash see supervisor, read user instructions and warnings on the package, or call 3m occupational health and environmental safety division (oh&esd) technical service in the u.s.a. at 1-800-243-4630. in canada, call 1-800-267-4414. ! warning: protective eyewear these welding safety products must be used only by qualified persons trained in their use and maintenance and only in strict accordance with and adherence to the detailed instructions and precautionary statements provided in the instruction manual which accompanies each product. failure to comply with these instructions could result in sickness, serious bodily injury or death. for proper use of these products read user instructions and warnings on the package. any questions concerning proper use should be directed to your supervisor, on-site training specia list, industrial hygienist or 3m occupational health and safety division (oh&esd) technical service in the u.s.a. at 1-800-243-4630. in canada, call 1-800-267-4414. ! warning: welding products these hearing protectors help reduce exposure to hazardous noise and other loud sounds. misuse or failure to wear hearing protectors at all times that you are exposed to noise may result in hearing loss or injury. for proper use, see supervisor, user instructions, or call 3m occupational health and environmental safety division (oh&esd) technical service in the u.s.a. at 1-800-243-4630. in canada, call 1-800-267-4414. i f there is any drainage from your ear or you have an ear infection, consult with your physician before wearing ear plugs. failure to do so may result in hearing loss or injury. ! warning: hearing protection safety warnings these respirators help protect against certain airborne contaminants. before use, the wearer must read and understand the user instructions provided as a part of the product packaging. a written respiratory protection program must be implemented meeting all the requirements of osha 29 cfr 1910.134 including training, fit testing and medical evaluation. in canada, csa standards z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. misuse may result in sickness or death. for proper use, see package instructions, supervisor, or call 3m occupational health and safety division (oh&esd) technical service in u.s.a. at 1-800-243-4630. in canada, call 1-800-267-4414. warning: r espirators ! failure to properly handle and dispose of sorbents contaminated by hazardous materials can result in serious physical injury or death and/or environmental harm. for proper handling, consult the material safety data sheet for the material absorbed, applicable safety and health standards, contact your supervisor, or call 3m occupational health and environmental safety division (oh&esd) technical service at 1-800-243-4630. to reduce the risk of serious physical injury or death, always use respiratory protection and protective clothing appropriate for handling the material to be absorbed. transportation and disposal of spent sorbents must comply with all applicable federal, state and local laws and regulations. caution: sorbents may become slippery when used on flooring. do not walk on sorbent or place in high traffic areas. ! warning: sorbents compliant fall protection and emergency rescue systems help prevent serious injury during fall arrest. users must read and understand the user instructions provided with the product and be properly trained by their employer prior to use per osha 1910.66 and 1926.503 or applicable local standards. misuse or failure to follow warnings and instructions may result in serious personal injury or death. for proper use, see supervisor, user instructions , or call 3m occupational health and environmental safety division (oh&esd) technical service in the u.s.a. at 1-800-243-4630. in canada, call 1-800-267-4414. ! warning: fall protection 122
product number/description size upc (021200-) qty./case 3m ? 5-way penetrant 243698 ? inhibits rust and corrosion by spreading a thin, even film that actually penetrates the pores of the surface ? it displaces moisture and dries out electrical parts and equipment to help prevent shorting and increase conductivity ? spray it on to free rusted, frozen bolts, nuts, and screws ? lubricate delicate machines and precision instruments ? penetrates and demoisturizes ? ideal as a tapping lubricant for stainless steel and aluminum ? contains no methylene chloride, 1, 1, 1-trichloroethane or chlorofluorocarbons 24 fl. oz. 21305-2 12 3m ? citrus base cleaner 243700 ? multi-purpose cleaner ? will dissolve and flush away dirt, grease, tar, most noncuring type adhesive films and similar substances ? citrus oil-based cleaner that emulsifies when flushed with water ? contains no petroleum distillates ? use to clean and degrease metal parts, motors, tools, printing presses and concrete ? contains no methylene chloride, 1, 1, 1-trichlorofluorocarbons 24 fl. oz. 76394-6 12 product number/description size upc (048011-) qty./case 3m ? stainless steel cleaner and polish 76621 ? cleans and polishes stainless steel, chrome aluminum and laminated plastic surfaces ? high gloss in one step ? contains no ozone depleting chemical 21 fl. oz. 14002-0 12 3m ? maintenance aerosols 3m ? maintenance aerosols: 3ms line of aerosol cleaners are the fast and easy solution for removing grease, grime, inks, and residues on electrical equipment and components. 3913 product number/description size upc (054007-) qty./case scotch ? vinyl electrical tape super 33+ 442178 ? provides primary electrical insulation for splices up to 600v ? abrasion corrosion and uv-resistant ? makes an excellent protective jacketing for high-voltage cables and wire harnessing ? ul listed and csa certified ? resists alkalis and acids, flame retardant ? excellent all-weather performance in cold to 0f (-18c) or hot to 220f (105c) 3/4" x 66' 06132-8 100 3m ? electrical products maintenance and repair 123
3m ? safety-walk ? matting spring-coiled vinyl foam compresses uniformly and continually, providing greater comfort and less fatigue. 3m ? facility care products product number/description color size upc (048011-) qty./case 3270 (no edging) 31783 ? economical matting ideal for fatigue resistance in dry environments ? textured, solid surface improves traction and allows debris and liquid to stay on top of the mat for easy cleanup ? lightweight for easy moving and repositioning ? no edging black 3' x 10' 34821-6 1 3' x 20' 34823-0 3270e (black edging) 31783 ? economical matting ideal for fatigue resistance in dry environments ? textured, solid surface improves traction and allows debris and liquid to stay on top of the mat for easy cleanup ? lightweight for easy moving and repositioning ? integral edging on the long edge of the mat and nosing on the ends black with black edging 3' x 5' 34826-1 1 3' x 10' 34828-5 3' x 20' 34830-8 4' x 6' 34827-8 4' x 10' 34829-2 utility cloth rolls 3m ? portable utility roll 314d product number/description w x l grade upc (051141-) qty./case utility rolls ? portable for ease of use at jobsite ? protective plastic pack resists dirt, oil, water and serves as a convenient dispenser ? aluminum oxide abrasive product sheets constructed on x- or j-weight, durable cloth backing 1" x 8 yds. p60 x 20963-0 1/5 1" x 12 yds. p60 j 20964-7 1" x 16 yds. p120 j 20965-4 1" x 20 yds. p180 j 20966-1 p240 j 20967-8 1" portable utility roll kit kit contains one (1) each of the above utility rolls 20968-0 1/5 509194 maintenance and repair 479683 124
size micron upc product id bags per case polypropylene felt #1 1 016145- 18093-4 nb0001pps1c 50 5 016145- 18099-6 nb0005pps1c 10 016145- 18105-4 nb0010pps1c 25 016145- 18111-5 nb0025pps1c 50 016145- 18117-7 nb0050pps1c 100 016145- 18123-8 nb0100pps1c 200 016145- 18129-0 nb0200pps1c #2 1 016145- 18094-1 nb0001pps2c 5 016145- 18100-9 nb0005pps2c 10 016145- 18106-1 nb0010pps2c 25 016145- 18112-2 nb0025pps2c 50 016145- 18118-4 nb0050pps2c 100 016145- 18124-5 nb0100pps2c 200 016145- 18130-6 nb0200pps2c polyester felt #1 1 016145- 18089-7 nb0001ees1c 50 5 016145- 18095-8 nb0005ees1c 10 016145- 18101-6 nb0010ees1c 25 016145- 18107-8 nb0025ees1c 50 016145- 18113-9 nb0050ees1c 100 016145- 18119-1 nb0100ees1c 200 016145- 18125-2 nb0200ees1c #2 1 016145- 18090-3 nb0001ees2c 5 016145- 18096-5 nb0005ees2c 10 016145- 18102-3 nb0010ees2c 25 016145- 18108-5 nb0025ees2c 50 016145- 18114-6 nb0050ees2c 100 016145- 18120-7 nb0100ees2c 200 016145- 18126-9 nb0200ees2c size micron upc product id bags per case nylon monofilament #1 25 016145- 18195-5 nb0025nys1r 50 50 016145- 18197-9 nb0050nys1r 100 016145- 18199-3 nb0100nys1r 150 016145- 18201-3 nb0150nys1r 200 016145- 18203-7 nb0200nys1r 250 016145- 18205-1 nb0250nys1r 25 400 016145- 18207-5 nb0400nys1r 600 016145- 18209-9 nb0005pps2c 800 016145- 18211-2 nb0800nys1r 1200 016145- 18213-6 nb1200nys1r #2 25 016145- 18196-2 nb0025nys2r 50 50 016145- 18198-6 nb0050nys2r 100 016145- 18200-6 nb0100nys2r 150 016145- 18202-0 nb0150nys2r 200 016145- 18204-4 nb0200nys2r 250 016145- 18206-8 nb0250nys2r 400 016145- 18208-2 nb0400nys2r 25 600 016145- 18210-5 nb0600nys2r 800 016145- 18212-9 nb0800nys2r 1200 016145- 18214-3 nb1200nys2r 3m ? purification series nb liquid bag filters 3m ? purification series nb liquid bag filter products combine filtration experience and manufacturing expertise to provide high quality, cost effective solutions for those applications where a rated bag filtration is appropriate. series nb bag products are available in polypropylene felt and polyester felt in size #1 and size #2 configurations in grades ranging from 1C200 microns. the bags feature an all welded construction with a plastic sealing collar for consistent and reproducible filtration. series nb bag products are also available in nylon monofilament materials of construction in size #1 and size #2 configurations in grades ranging from 25C1200 microns. the high strength and uniform porosity of the nmo bags make them an excellent choice for applications looking for removal of oversized contaminants while allowing for passage of desired fluid particles (metallic paints). size #1 size #2 dimensions 7" od x 16" l 7" od x 32" l max. operating temperature 180f/82c (polypropylene felt) 300f/149c (polyester felt, nmo) max. recommended flow 90 gpm 180 gpm recommended changeout differential pressure 20 psid 3m ? purification series nb liquid bag f ilter specifications and o perating parameters filtration products 125 table of contents coated abrasives fibre discs 1C4 flap discs 5C8 stikit ? and psa discs 9C13 roloc ? discs 14C19 belts 20C38 sheets and rolls 39C41 flap wheels 42C43 specialty 44C46 surface conditioning abrasives scotch-brite ? discs 47C53 roloc ? 48C50 hook-and-loop 51C52 tn quick change 53 spindle mount 53 scotch-brite ? abrasives 54C68 belts 54C56 wheels 57C64 specialty 65C66 hand pads/rolls 67C68 bonded abrasives type 27 and 28 wheels 69 cut-off wheels 70 superabrasives wheels 78C85 dressing and truing tools 85C87 kits and packs abrasive kits/packs 71 abrasive grade guides abrasive grade comparison guide 88 scotch-brite ? product guide 88 adhesives and tapes structural and non-structural adhesives 89C95 scotch-weld ? adhesives 96C97 tapes/masking/ dispensers 98C109 maintenance and repair maintenance aerosols 123 electrical 123 facility care 124 utility cloth rolls 124 filtration 3m ? purification series nb liquid bag filters 125 accessories abrasive accessories 72C77 power tools power tools iiiCviii safety respirators 110C113 speedglas ? helmets 114C115 hearing conservation 116C117 protective eyewear 118 sorbents 119 fall protection 120C121 122 ! safety warnings 12 p12 p16 16 p20
3m industrial products for metalworking please recycle. printed in u.s.a. ? 3m 2011. all rights reserved. 61-5002-8097-1 2011 edition abrasive systems division 3m center, building 223-6s-03 st. paul, mn 55144-1000 1-866-279-1235 www.3m.com/abrasives prices subject to change without notice. important notice to purchaser safety information: always read and follow all safety information included with the product. do not exceed maximum operating rpms. use guards provided with machine. follow safety operation procedures posted in work areas. product use: all statements, technical information and recommendations contained in this document are based upon tests or experience that 3m believes are reliable. however, many factors beyond 3ms control can effect the use and performance of a 3m product in a particular application, including the conditions under which the product is used and the time and environments conditions in which the product is expected to perform. since these factors are uniquely within the users knowledge and control, it is essential that the user evaluate the 3m product to determine whether it is fit for a particular purpose and suitable for the users method of application. warranty and limited remedy: unless stated otherwise in 3ms product literature, packaging inserts or product packaging for individual products, 3m warrants that each 3m product meets the applicable specifications at the time 3m ships the product. individual products may have additional or different warranties as stated on product literature, package inserts or product packages. 3 m m a k e s n o ot h er w a rran t i es , e x p ress o r i mp l i ed , i nc l u din g, bu t n ot l imi t ed to, an y imp l ied w arran ty o f merchan t abi l i ty o r fi t ness f o r a par t icu l ar purp o se o r an y imp l ied w arran ty arisin g o u t o f a c o urse o f dea l in g, cus to m o r usa g e o f t rade . user is responsible for determining whether the 3m product is fit for a particular purpose and suitable for users application. if the 3m product is defective within the warranty period, your exclusive remedy and 3ms and sellers sole obligation will be at 3ms option, to replace the product or refund the purchase price. limitation of liability: except where prohibited by law, 3m and seller will not be liable for any loss or damage arising from the 3m product, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or strict liability. th r ee e as y wa y s to co n t a ct us fo r all 3m indus t rial pr o du ct s : 3m can provide additional products and accessories to meet your needs. please contact us in any of the following ways that you prefer: contact your local 3m authorized distributor directly. for information on a 3m distributor or sales representative in your area, contact us at the numbers below: for the contiguous 48 united states: call .............. 1-866-279-1288 f ax .............. 1-877-369-2923 e-mail us a t 3mindustrial@mmm.com f or additional 3m product information call 1-800-3m h elps or visit us at www.3m.com 1 2 3 engineered metalworking solutions 3m, b x , cool flow, classic, cubitron, e-a-r, e-a-rsoft, earflex, elavation, ep x , g reen corps, hookit, l exa, l ight vision, neons, o ne t ouch, o ptime, peltor, pistonz, push-ins, re l oad, roloc, safeabsorb, safe l ight, safety- w alk, scotch, scotch-brite, scotch-seal, scotch- w eld, scotchblok, scotchpar, scotchpro, speedglas, stikit, super 77, t artan, t hor, t rizact, ultrafit, vhb, virtua, w etordry and y ellow neon are all trademarks of 3m.

▲Up To Search▲

Price & Availability of 051144-01762-1

	To Download 051144-01762-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .